International Journal of Materials Science and Applications

Archive

Volume 10, Issue 1, January 2021

  • Effect of Production Variables on the Physico-Mechanical Properties of Fibre-Reinforced Plastic Composites Boards Produced from Waste Paper and Re-Cycled Polyethlene

    Aguda Lawrence, Kehinde Rebecca, Orire Luke, Olajide Benard, Akala Abisayo, Ajao Olawale

    Issue: Volume 10, Issue 1, January 2021
    Pages: 1-7
    Received: 23 November 2020
    Accepted: 8 December 2020
    Published: 12 January 2021
    DOI: 10.11648/j.ijmsa.20211001.11
    Downloads:
    Views:
    Abstract: The mechanical and physical properties of fibre reinforced composite boards (FRCB) made from waste paper and recycled polyethylene was investigated. The composite boards were produced at three levels of mixing ratio (50:50, 60:40 and 70:30) and three levels of board density (1000 Kg/m3, 1100 Kg/m3 and 1200 Kg/m3). The fibre from the paper served as... Show More
    Download PDF
    View Online

  • Wetting and Bonding Behavior of SUS 304 Metal and Forsterite Ceramic with a PbO-Bi2O3-B2O3-ZnO Glass Frit

    Hang Choi, Tadachika Nakayama, Jin Sam Choi

    Issue: Volume 10, Issue 1, January 2021
    Pages: 8-11
    Received: 12 August 2020
    Accepted: 4 September 2020
    Published: 23 February 2021
    DOI: 10.11648/j.ijmsa.20211001.12
    Downloads:
    Views:
    Abstract: The joining behavior of metal to ceramic was investigated using glass frit media. Glass frit with a composition of 71.5PbO-24Bi2O3-2.5B2O3-1.5ZnO-0.5SiO2 in mol. % was designed to bond forsterite ceramic and SUS 304 metal. The glass frit demonstrated a glass transition temperature of 250°C and a thermal expansion coefficient of 15.9 x 10-6/°C, whic... Show More
    Download PDF
    View Online

  • Delicacy Management on Kiloton Dry Wet Spinning Bath Liquid

    Fang Liu, Dong Liu, Pengzong Guo, Guo Li, Rui Yang

    Issue: Volume 10, Issue 1, January 2021
    Pages: 12-17
    Received: 12 January 2021
    Accepted: 2 February 2021
    Published: 26 February 2021
    DOI: 10.11648/j.ijmsa.20211001.13
    Downloads:
    Views:
    Abstract: During the dry-jet wet spinning process of polyacrylonitrile carbon fiber precursor, the fluctuation of the coagulation bath liquid level affects the stability of the nozzle directly. The motion trajectory and the motion intensity in all directions of the fluid during the movement of the fiber in the coagulation bath fluid field were studied. A thr... Show More
    Download PDF
    View Online

  • The Use of Taguchi Method to Elaborate Good ZnO Thin Films by Sol Gel Associated to Dip Coating

    Modou Pilor, Bouchaib Hartiti, Alle Dioum, Hicham Labrim, Youssef Arba, Amine Belafhaili, Mounia Tahri, Salah Fadili, Bassirou Ba, Philippe Thevenin

    Issue: Volume 10, Issue 1, January 2021
    Pages: 18-24
    Received: 16 February 2021
    Accepted: 9 March 2021
    Published: 17 March 2021
    DOI: 10.11648/j.ijmsa.20211001.14
    Downloads:
    Views:
    Abstract: ZnO thin films have been prepared by dip coating sol gel method using Taguchi technique. The underlying principle was to make something as little as conceivable the measure of examination and make sense of the best conditions for developing ZnO thin films with great properties. We used a trial plan of L9, with three levels (high, medium, low) and f... Show More
    Download PDF
    View Online

About Us

Science Publishing Group (SciencePG) is an Open Access publisher, with more than 300 online, peer-reviewed journals covering a wide range of academic disciplines.

Learn More About SciencePG

Products

Information

Important Link

Copyright © 2012 -- 2024 Science Publishing Group – All rights reserved.