Abstract: Various types cooling/lubrication techniques are used in machining processes for enhancing machining performances. Conventional way of cooling/lubrication requires higher coolant cost, waste and disposal cost. Not only has that it had many negative impacts on environment and operators health. For attaining highest efficiency of cutting fluids with minimum quantity, different sustainable strategies are tried to develop. In recent decades researchers are worked out on different cooling/lubrication strategies alternative to conventional cooling. This paper represents a comprehensive review of all presently practiced cooling/lubrication strategies and their effects on different aspects such as surface quality of machined component, tool wear, tool life, cutting temperature, cutting forces etc. through analyzing selected papers. The influence of different cutting fluids such as solid lubricants, nanofluids, ionic liquids etc. with their positive and negative impacts is also discussed. The research gaps are also identified for further research works. From review it is clear that the machining performance is highly affected by cooling techniques and coolant types. Selection of proper cooling technique with suitable cutting fluids depends on work material, tool material and cutting variables.Abstract: Various types cooling/lubrication techniques are used in machining processes for enhancing machining performances. Conventional way of cooling/lubrication requires higher coolant cost, waste and disposal cost. Not only has that it had many negative impacts on environment and operators health. For attaining highest efficiency of cutting fluids with ...Show More
Abstract: Densities and speeds of sound for five binary mixtures of benzylalcohol with 1,3-propandiol, 1- propanol, 2- propanol, 1,2-propandiol and phenylethnol were measured over the entire range of composition and at five temperatures from 298.15K to 323.15K at 5K interval and atmospheric pressure using a vibrating u-tube densimeter (DSA 5000). Besides, the densities for pure compounds in the above-mentioned temperature range were measured. The experimental densities were used to calculate the excess molar volumes, isentropic compressibility changes, the excess thermal expansion coefficients, and the excess partial molar volumes at infinite dilution, The results have been used to discuss the nature and strength of intermolecular interactions in these mixtures. The calculated excess and deviations quantities are correlated with the third-order Redlich–Kister equation. As a final work we modeled the experiment results by using TM and PR EOSs. This is clear that the results with TM EOS are more acceptable than PR EOS. TM and PR EOS can successfully predict density and excess molar volume. And are unable to predict speed of sound.Abstract: Densities and speeds of sound for five binary mixtures of benzylalcohol with 1,3-propandiol, 1- propanol, 2- propanol, 1,2-propandiol and phenylethnol were measured over the entire range of composition and at five temperatures from 298.15K to 323.15K at 5K interval and atmospheric pressure using a vibrating u-tube densimeter (DSA 5000). Besides, th...Show More