Dynamic Modelling and Simulation of a Three-Phase Gravity Separator

Bishoy Magdi Abdu Sabir; Ibrahim Hassan Mohammed Elamin; Hisham Rabie Sadiq

doi:doi:10.11648/j.ajche.20231101.11

| Peer-Reviewed

Dynamic Modelling and Simulation of a Three-Phase Gravity Separator

Bishoy Magdi Abdu Sabir, Ibrahim Hassan Mohammed Elamin, Hisham Rabie Sadiq

Published in American Journal of Chemical Engineering (Volume 11, Issue 1)

Received: 1 November 2022 Accepted: 23 November 2022 Published: 17 January 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, simulation, and control. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. This paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing α (control valve's stem position) and decreasing Q_in (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.

Published in	American Journal of Chemical Engineering (Volume 11, Issue 1)
DOI	10.11648/j.ajche.20231101.11
Page(s)	1-19
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Modeling and Simulation, Matlab, Aspen Hysys, Three-Phase Gravity Separator

References

[1]	Arnold, K. and Stewart, M., Surface Production Operation: Design of Oil-handling Systems and Facilities, 2nd Edition. Butterworth-Heinemann, USA, 1998.
[2]	Bridgeman, A., (2004), Ideal gas law, http://www.hull.ac.uk/php/chsajb/general/ideal_gas.html, 11 September 2005.
[3]	Delpierre, G. R. and Sewell, B. T., (2002), The gas laws, http://www.physchem.co.za/Kinetic/Gas%20Laws.htm#Value, 21 June 2004.
[4]	Grodal, O. and Matthew, R., Optimal design of two- and three-phase separators: A mathematical programming formulation. SPE Annual Technical Conference and Exhibition: 'Production Operations and Engineering - General', Houston, TX, USA, 1999, Code 56643.
[5]	Harris, J. W. and Stocker, H., Handbook of Mathematics and Computational Science, Springer_Verlag New York, Inc, USA, 1998.
[6]	Ideal Aerosmith, (2004), Flow calculation for gases, http://www.idealvalve.com/ftp/wwwflowc.pdf, 13 March 2004.
[7]	Kyle Andrews. 3-Phase Separators: An Overview. 2014. https://kimray.com/training/3-phase-separators-overview (Accessed 5/1/2022).
[8]	Monnery, W. D. and Svrcek, W. Y., Successfully specify three-phase separators. Chemical Engineering Progress, 90 (1994), 29-40.
[9]	N. Al-Hatmi and M. Tham. DYNAMIC MODELLING AND SIMULATION OF A THREE-PHASE GRAVITY SEPARATOR. UK: University of Newcastle upon Tyne. Proceedings 5th MATHMOD Vienna (I. Troch, F. Breitenecker, eds.) (February 2006): 1-7.
[10]	Ogunnaike, A. and Ray, W. H., Process, Dynamics, Modelling, and Control, Oxford University Press, Inc, New York, 1994.
[11]	Richard Haigh. Oil & Gas 50 2021 Ranking. 2022. https://brandirectory.com/rankings/oil-and-gas/table (Accessed 21/1/2022).
[12]	Pallavi Wankhede. Three Phase Separator. 2020. https://www.theengineeringconcepts.com/three-phase-separator/ (Accessed 21/11/2022).
[13]	Chien, I. L. and Fruehauf, P. S., Consider IMC tuning to improve controller performance. Chemical Engineering Progress, 86 (1990), 33-41.
[14]	Fitzgerald, B., Control Valves for the Chemical Process Industries, McGraw-Hill, Inc, New York, 1995.
[15]	Marlin, T. E., Process Control: Designing Processes and Control Systems for Dynamic Performance, McGraw-Hill, Inc, Singapore, 1995.
[16]	Skogestad, S. and Postlethwaite, I., Multivariable Feedback Control; Analysis and Design., John Wiley & Sons Ltd, Chichester, 1996.

Cite This Article

Plain Text BibTeX RIS

APA Style

Bishoy Magdi Abdu Sabir, Ibrahim Hassan Mohammed Elamin, Hisham Rabie Sadiq. (2023). Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. American Journal of Chemical Engineering, 11(1), 1-19. https://doi.org/10.11648/j.ajche.20231101.11

Copy | Download

ACS Style

Bishoy Magdi Abdu Sabir; Ibrahim Hassan Mohammed Elamin; Hisham Rabie Sadiq. Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. Am. J. Chem. Eng. 2023, 11(1), 1-19. doi: 10.11648/j.ajche.20231101.11

Copy | Download

AMA Style

Bishoy Magdi Abdu Sabir, Ibrahim Hassan Mohammed Elamin, Hisham Rabie Sadiq. Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. Am J Chem Eng. 2023;11(1):1-19. doi: 10.11648/j.ajche.20231101.11

Copy | Download

@article{10.11648/j.ajche.20231101.11,
  author = {Bishoy Magdi Abdu Sabir and Ibrahim Hassan Mohammed Elamin and Hisham Rabie Sadiq},
  title = {Dynamic Modelling and Simulation of a Three-Phase Gravity Separator},
  journal = {American Journal of Chemical Engineering},
  volume = {11},
  number = {1},
  pages = {1-19},
  doi = {10.11648/j.ajche.20231101.11},
  url = {https://doi.org/10.11648/j.ajche.20231101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20231101.11},
  abstract = {Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, simulation, and control. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. This paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing α (control valve's stem position) and decreasing Q_in (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Dynamic Modelling and Simulation of a Three-Phase Gravity Separator
AU  - Bishoy Magdi Abdu Sabir
AU  - Ibrahim Hassan Mohammed Elamin
AU  - Hisham Rabie Sadiq
Y1  - 2023/01/17
PY  - 2023
N1  - https://doi.org/10.11648/j.ajche.20231101.11
DO  - 10.11648/j.ajche.20231101.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 1
EP  - 19
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20231101.11
AB  - Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, simulation, and control. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. This paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing α (control valve's stem position) and decreasing Q_in (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.
VL  - 11
IS  - 1
ER  -

Copy | Download

Author Information

Bishoy Magdi Abdu Sabir

Chemical Engineering Department, Karary University, Khartoum, Sudan
Ibrahim Hassan Mohammed Elamin

Chemical Engineering Department, University of Science and Technology, Khartoum, Sudan
Hisham Rabie Sadiq

Chemical Engineering Department, Karary University, Khartoum, Sudan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Bishoy Magdi Abdu Sabir, Ibrahim Hassan Mohammed Elamin, Hisham Rabie Sadiq. (2023). Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. American Journal of Chemical Engineering, 11(1), 1-19. https://doi.org/10.11648/j.ajche.20231101.11

Copy | Download

ACS Style

Bishoy Magdi Abdu Sabir; Ibrahim Hassan Mohammed Elamin; Hisham Rabie Sadiq. Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. Am. J. Chem. Eng. 2023, 11(1), 1-19. doi: 10.11648/j.ajche.20231101.11

Copy | Download

AMA Style

Bishoy Magdi Abdu Sabir, Ibrahim Hassan Mohammed Elamin, Hisham Rabie Sadiq. Dynamic Modelling and Simulation of a Three-Phase Gravity Separator. Am J Chem Eng. 2023;11(1):1-19. doi: 10.11648/j.ajche.20231101.11

Copy | Download

@article{10.11648/j.ajche.20231101.11,
  author = {Bishoy Magdi Abdu Sabir and Ibrahim Hassan Mohammed Elamin and Hisham Rabie Sadiq},
  title = {Dynamic Modelling and Simulation of a Three-Phase Gravity Separator},
  journal = {American Journal of Chemical Engineering},
  volume = {11},
  number = {1},
  pages = {1-19},
  doi = {10.11648/j.ajche.20231101.11},
  url = {https://doi.org/10.11648/j.ajche.20231101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20231101.11},
  abstract = {Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, simulation, and control. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. This paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing α (control valve's stem position) and decreasing Q_in (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Dynamic Modelling and Simulation of a Three-Phase Gravity Separator
AU  - Bishoy Magdi Abdu Sabir
AU  - Ibrahim Hassan Mohammed Elamin
AU  - Hisham Rabie Sadiq
Y1  - 2023/01/17
PY  - 2023
N1  - https://doi.org/10.11648/j.ajche.20231101.11
DO  - 10.11648/j.ajche.20231101.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 1
EP  - 19
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20231101.11
AB  - Many studies have investigated the crude oil separation process's separation mechanisms, size, and design, employing horizontal 3-Phase Gravity Separators in depth. There are, however, very few articles on their dynamics, modelling, simulation, and control. Understanding its dynamic behaviour will aid in designing and tuning the device that can manage water level, oil level, and gas pressure in response to feeding variations. This Scientific Paper gives a complete mathematical analysis, modelling, and simulation of a crude oil separation process using a horizontal 3-Phase Gravity Separator using Mathworks Matlab R2016b-x64 and Aspen Hysys V10. Bishoy's Equations, which were constructed, will assist in operating this gadget, locating various variables, and observing the effect of modifying variables on the system's variables. The rationale for this study was developed in response to the small number of articles discovered, which may be a covert issue held up by large oil companies, as well as the complicated equations related to this process that remain unsolved, and to monitor what is happening in this complex dynamic process. This paper provides everything related to a three-phase gravity separator, including changing of variables and observing the effect on the system when those variables were modified. The equations determined the following variables: The height of gas, water, oil, the height of oil when it jumped the weir, the pressure of the gas (in and out), water pressure (in and out), oil pressure (in and out), and the effect of increasing α (control valve's stem position) and decreasing Q_in (inlet volumetric flowrate) on these variables have all been studied. This article discovered that increasing the control valve stem position and decreasing the inflow volumetric flowrate of both oil and water was highly unsafe and caused significant variations in the system's heights and pressures using Matlab. The Aspen Hysys analysis optimally separates the oil, gas, and water to determine material, energy streams properties, and compositions. As a result, this complex dynamic behaviour was observed, and no additional articles were discovered that addressed this subject. This process monitoring will determine the best conditions for flawless separation, with the selectivity of the desired product or products as the primary goal. This research can revolutionize the way people think about oil and gas extraction and processing and benefit colossal oil and gas firms in Europe, Asia, and Africa.
VL  - 11
IS  - 1
ER  -

Copy | Download