Recently environmental awareness and reduction of world fossil fuel reserves have enforced the need to look for a replacement of mineral oils with environmentally friendly and nontoxic epoxy oil vegetable-based. The current study implies that Epoxidized podocarpus falcatus oil can be a substitute as a raw material for the production of a variety of chemicals and the replacement of petroleum products in composite matrices because of having high reactivity of oxirane ring. The podocarpus falcatus oil was obtained by using the solvent extraction method. In this present investigation, the extracted podocarpus falcatus oil was epoxidized using a performic acid generated in situ by the reaction of aqueous hydrogen peroxide and carboxylic acid in presence of strong Sulphuric acid. A maximum percentage of conversion of oil and selectivity of epoxidized oil were found to be at 63°C temperature, 1.4:1 molar ratio of hydrogen peroxide to ethylene unsaturation double bond of podocarpus falcatus oil, and 4 hours of time reaction. The effective synthesis of epoxidation reaction for confirmation on the investigation of epoxidized podocarpus falcatus oil was characterized by identifying the structure, functional group, and composition of podocarpus falcatus seed oil, in comparison to epoxidized podocarpus falcatus oil, using Fourier Transform Infrared Spectroscopy.
| Published in | American Journal of Chemical Engineering (Volume 9, Issue 4) |
| DOI | 10.11648/j.ajche.20210904.12 |
| Page(s) | 84-90 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Podocarpus Falcatus, Epoxidation, Epoxidized Podocarpus Falcatus Oil, Per Formic Acid
| [1] | Bakthavachalam, A., Beyene, S. D. & Gopal, V. Industrial Crops & Products Green epoxy synthesized from Perilla frutescens : A study on epoxidation and oxirane cleavage kinetics of high-linolenic oil. Ind. Crop. Prod. 123, 25–34 (2018). |
| [2] | Chang, C., Qin, Y., Luo, X. & Li, Y. Synthesis and process optimization of soybean oil-based terminal epoxides for the production of new biodegradable polycarbonates via the intergration of CO 2. Ind. Crop. Prod. 99, 34–40 (2017). |
| [3] | Thompson, A. E., Dierig, D. A. & Kleiman, R. Characterization of Vernonia galamensis germplasm for seed oil content, fatty acid composition, seed weight, and chromosome number. Ind. Crops Prod. 2, 299–305 (1994). |
| [4] | Jankovi, M. R., Govedarica, O. M. & Sinadinovi, V. The epoxidation of linseed oil with in situ formed peracetic acid : A model with included in fl uence of the oil fatty acid composition. Ind. Crops Prod. 143, (2020). |
| [5] | Dinda, S., Patwardhan, A. V, Goud, V. V & Pradhan, N. C. Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalyzed by liquid inorganic acids. Bioresource. Technol. 99, 3737–3744 (2008). |
| [6] | Cousin, T., Chatel, G., Kardos, N., Andrioletti, B. & Draye, M. Ultrasonics - Sonochemistry High frequency ultrasound as a tool for elucidating mechanistic elements of cis -cyclooctene epoxidation with aqueous hydrogen peroxide. Ultrason. - Sonochemistry 53, 120–125 (2019). |
| [7] | Wang, R. Scholars ’ Mine Manufacturing of vegetable oils-based epoxy and composites for structural applications. (2014). |
| [8] | Feleke, S., Haile, F., Alemu, A. & Abebe, S. Characteristics of seed kernel oil from podocarpus. 24, 512–516 (2012). |
| [9] | Tadele, D. & Fetene, M. Growth and ecophysiology of seedlings of Podocarpus falcatus in planta- tions of exotic species and in a natural montane forest in Ethiopia. 24, (2013). |
| [10] | Kazemnejadi, M. Synthesis and characterization of a new poly a -amino acid Co (II) -complex supported on magnetite graphene oxide as an ef fi cient heterogeneous magnetically recyclable catalyst for ef fi cient free-coreductant gram-scale epoxidation of ole fi ns with. Organomet. Chem. 896, 59–69 (2019). |
| [11] | Cavoué, T. Electrochemistry Communications Ethylene epoxidation on Ag / YSZ electrochemical catalysts: Understanding of oxygen electrode reactions. Electrochem. commun. 105, 106495 (2019). |
| [12] | Mohammadikish, M., Yarahmadi, S. & Molla, F. A new water-insoluble coordination polymer as efficient dye adsorbent and olefin epoxidation catalyst. J. Environ. Manage. 254, 109784 (2020). |
| [13] | Gamage, P. K., Brien, M. O. & Karunanayake, L. Epoxidation of some vegetable oils and their hydrolysed products with peroxyformic acid - optimised to industrial scale. 37, 229–240 (2009). |
| [14] | Liu, Z., Erhan, S. Z. & Xu, J. Preparation, characterization and mechanical properties of epoxidized soybean oil / clay nanocomposites *. Polymer (Guildf). 46, 10119–10127 (2005). |
| [15] | Meshram, P. D., Puri, R. G. & Patil, H. V. Epoxidation of Wild Safflower (Carthamus oxyacantha) Oil with Peroxy acid in presence of strongly Acidic Cation Exchange Resin IR- 122 as Catalyst. 3, 1152–1163 (2011). |
| [16] | Guo, Y. Binuclear molybdenum Schi ff -base complex: An efficient catalyst for the epoxidation of alkenes. Mol. Catal. 475, 1–7 (2019). |
| [17] | Xie, W. & Chai, X. Determination of epoxy groups in epoxy resins by reaction-based headspace gas chromatography. Polymer Test. 59, 113–117 (2017). |
| [18] | Nugrahani, R. A., Redjeki, A. S., Mentari, Y., Jannah, M. & Wibowo, T. Y. Study effect of temperature and reaction kinetics model selection epoxidation against rice bran oil methyl ester with catalyst amberlite iR-120. 12, 3947–3952 (2017). |
| [19] | Engel, R. V Solvent-free aerobic epoxidation of 1-decene using supported cobalt catalysts. Catal. Today 1–7 (2018) doi: 10.1016/j.cattod.2018.09.005. |
| [20] | Milchert, E., Malarczyk, K. & Kłos, M. Technological Aspects of Chemoenzymatic Epoxidation of Fatty Acids, Fatty Acid Esters and Vegetable Oils : A Review. 21481–21493 (2015) doi: 10.3390/molecules201219778. |
| [21] | Samarth, N. B. Available online a t www.scholarsresearchlibrary.com Scholars Research Library Scholars Research Library. 8, 1–7 (2016). |
APA Style
Yigezu Mekonnen. (2021). Epoxidation of Podocarpus Falcatus Oil by Sulphuric Acid Catalyst: Process Optimization and Physio-chemical Characterization. American Journal of Chemical Engineering, 9(4), 84-90. https://doi.org/10.11648/j.ajche.20210904.12
ACS Style
Yigezu Mekonnen. Epoxidation of Podocarpus Falcatus Oil by Sulphuric Acid Catalyst: Process Optimization and Physio-chemical Characterization. Am. J. Chem. Eng. 2021, 9(4), 84-90. doi: 10.11648/j.ajche.20210904.12
AMA Style
Yigezu Mekonnen. Epoxidation of Podocarpus Falcatus Oil by Sulphuric Acid Catalyst: Process Optimization and Physio-chemical Characterization. Am J Chem Eng. 2021;9(4):84-90. doi: 10.11648/j.ajche.20210904.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajche.20210904.12,
author = {Yigezu Mekonnen},
title = {Epoxidation of Podocarpus Falcatus Oil by Sulphuric Acid Catalyst: Process Optimization and Physio-chemical Characterization},
journal = {American Journal of Chemical Engineering},
volume = {9},
number = {4},
pages = {84-90},
doi = {10.11648/j.ajche.20210904.12},
url = {https://doi.org/10.11648/j.ajche.20210904.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20210904.12},
abstract = {Recently environmental awareness and reduction of world fossil fuel reserves have enforced the need to look for a replacement of mineral oils with environmentally friendly and nontoxic epoxy oil vegetable-based. The current study implies that Epoxidized podocarpus falcatus oil can be a substitute as a raw material for the production of a variety of chemicals and the replacement of petroleum products in composite matrices because of having high reactivity of oxirane ring. The podocarpus falcatus oil was obtained by using the solvent extraction method. In this present investigation, the extracted podocarpus falcatus oil was epoxidized using a performic acid generated in situ by the reaction of aqueous hydrogen peroxide and carboxylic acid in presence of strong Sulphuric acid. A maximum percentage of conversion of oil and selectivity of epoxidized oil were found to be at 63°C temperature, 1.4:1 molar ratio of hydrogen peroxide to ethylene unsaturation double bond of podocarpus falcatus oil, and 4 hours of time reaction. The effective synthesis of epoxidation reaction for confirmation on the investigation of epoxidized podocarpus falcatus oil was characterized by identifying the structure, functional group, and composition of podocarpus falcatus seed oil, in comparison to epoxidized podocarpus falcatus oil, using Fourier Transform Infrared Spectroscopy.},
year = {2021}
}
TY - JOUR T1 - Epoxidation of Podocarpus Falcatus Oil by Sulphuric Acid Catalyst: Process Optimization and Physio-chemical Characterization AU - Yigezu Mekonnen Y1 - 2021/07/21 PY - 2021 N1 - https://doi.org/10.11648/j.ajche.20210904.12 DO - 10.11648/j.ajche.20210904.12 T2 - American Journal of Chemical Engineering JF - American Journal of Chemical Engineering JO - American Journal of Chemical Engineering SP - 84 EP - 90 PB - Science Publishing Group SN - 2330-8613 UR - https://doi.org/10.11648/j.ajche.20210904.12 AB - Recently environmental awareness and reduction of world fossil fuel reserves have enforced the need to look for a replacement of mineral oils with environmentally friendly and nontoxic epoxy oil vegetable-based. The current study implies that Epoxidized podocarpus falcatus oil can be a substitute as a raw material for the production of a variety of chemicals and the replacement of petroleum products in composite matrices because of having high reactivity of oxirane ring. The podocarpus falcatus oil was obtained by using the solvent extraction method. In this present investigation, the extracted podocarpus falcatus oil was epoxidized using a performic acid generated in situ by the reaction of aqueous hydrogen peroxide and carboxylic acid in presence of strong Sulphuric acid. A maximum percentage of conversion of oil and selectivity of epoxidized oil were found to be at 63°C temperature, 1.4:1 molar ratio of hydrogen peroxide to ethylene unsaturation double bond of podocarpus falcatus oil, and 4 hours of time reaction. The effective synthesis of epoxidation reaction for confirmation on the investigation of epoxidized podocarpus falcatus oil was characterized by identifying the structure, functional group, and composition of podocarpus falcatus seed oil, in comparison to epoxidized podocarpus falcatus oil, using Fourier Transform Infrared Spectroscopy. VL - 9 IS - 4 ER -
Information
Email: