Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method

Zhao Mingrui; Liu Guangyu

doi:doi:10.11648/j.pst.20230702.12

| Peer-Reviewed

Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method

Zhao Mingrui, Liu Guangyu

Published in Pharmaceutical Science and Technology (Volume 7, Issue 2)

Received: 21 July 2023 Accepted: 23 August 2023 Published: 14 October 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Objective: Nifedipine is a calcium channel antagonist of dihydropyridine. There are many methods to synthesize nifedipine, but the yield is not high. In order to find a suitable process for the synthesis and industrialization of nifedipine, thermodynamic Parameters of Nifedipine had been estimated by Group Contribution Method. Methods: the standard molar enthalpy of reaction, standard isobaric heat capacity, residual entropy, the melting temperature and the flash point temperature of nifedipine were estimated by Joback method. Results: The results show that the standard molar reaction enthalpy of Nifedipine was estimated estimated by Joback method is , standard molar isobaric heat capacity is 108800J•mol^-1•K^-1 and residual entropy of nifedipine estimated by Joback method is at 290.15 K and atmospheric pressure which match with the datas of experiment. However the melting temperature and the flash point temperatureof nifedipine was estimated by Joback method is 1074.02 K and 969.98 K seperately, which have large gap between the estamated datas and the reality, and still need to revise. Coclusion: the thermodynamic parameters of nifedipine can be estimated by Joback group contribution method. Its corresponding data will provide essential support for industrial design and further theoretical studies.

Published in	Pharmaceutical Science and Technology (Volume 7, Issue 2)
DOI	10.11648/j.pst.20230702.12
Page(s)	27-32
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Antihypertensive Drug, Nifedipine, Group Contribution Method, Standard Enthalpy of Formation Method, Joback Method

References

[1]	Yu Qihui. Solid State Chemistry of Nifedipine [D]. Nanchang University, 2018.
[2]	He Zhijing, Qin Huaiguo, Chang Gang, et al. Advances in clinical application and dosage forms of Nifedipine [J]. Pharmaceutical Research, 2022, 41 (08): 545-550. DOI: 10.13506/J. CNKI. JPR. 2022.08.012.
[3]	Li Wenlong. Studies on crystal habit regulation of nifedipine and imidacloprid [D]. Tianjin University, 2020.
[4]	Wang Xin Yuan. Design, synthesis and properties of multi-component drugs of familavir and nifedipine [D]. Shandong University, 2021.
[5]	Zhang Yan, Ning Baoming, Zhou Xingtong, etal. Improvement of the photostability of Nifedipine by synthetic drug eutectic [J]. Journal of drug analysis, 2022, 42 (07): 1241-1246. DOI: 10.16155/J. 0254-1793.2022.07.18.
[6]	Ning Xiao, Jin shaoming, Dong Zhe, et al. Determination of Nifedipine in food and dietary supplement by UPLC-MS [J]. Journal of drug analysis, 2022, 42 (05): 821-830. DOI: 10.16155/J. 0254-1793. 2022. 05. 11.
[7]	Wu Hongmei, Li Huiting, Li Yongcheng, et al. Prediction of glass transition temperature of poly (m-phthaloyl-p-phenylenediamine) based on group contribution method and Molecular dynamics method [J]. Journal of college chemistry, 2019, 40 (01): 180-186.
[8]	Wang Fuan, Jiang Denggao. Chemical Engineering Data Guide [M]. Beijing: Chemical Industry Press, 1995.
[9]	Gao Guanghua, Chemical thermodynamics [M], Beijing: Tsinghua University Press. February, 2022.
[10]	Wan Jen, Song Fan, Peng Changjun, et al. Group contribution method for infinite dilution of molar conductivity in aqueous solution [J]. Journal of college chemistry, 2021, 42 (12): 3672-3679.
[11]	Chemical Research - Chemical Thermodynamics; Tianjin University Details Findings in Chemical Thermodynamics (Experimental Determination and Computational Analysis of Solid-liquid Phase Equilibrium of Nifedipine In Twelve Pure Solvents) [J]. Chemicals & Chemistry, 2020.
[12]	Sinan Kutluay, Orhan Baytar, Ömer Şahin. Equilibrium, kinetic and thermodynamic studies for dynamic adsorption of benzene in gas phase onto activated carbon produced from elaeagnus angustifolia seeds [J]. Journal of Environmental Chemical Engineering, 2019, 7 (2).
[13]	Jiaxin Wu, Renjie Xu, Xin Yuan, Jia Zhao, Jian Wang. Equilibrium solubility of dinitolmide in several neat solvents and binary aqueous co-solvent mixtures: experimental determination and thermodynamic analysis [J]. The Journal of Chemical Thermodynamics, 2019, 132.
[14]	Tang Kun, Liu Qilei, Zhang Lei, etal. Solvent design method based on high order group contribution method and COSMO-SAC Model [J]. Progress in chemical engineering, 2021, 40 (s 2): 48-55. DOI: 10.16085/J. ISSN. 1000-6613.2021-1469.
[15]	Ma Weiwu, Wang Lin, Liu Tao, etal. Evaluation of Organic Rankine cycle based on group contribution method and Second law of thermodynamics model [J]. Journal of Central South University, 26 (08): 2234-2243.
[16]	Shi Wentao, Zang Tingting, Wang Zhichao, etal. Chemical thermodynamics: from group contribution to computer-aided molecular design [J]. Chemical times, 2017, 31 (06): 3-6 + 40. DOI: 10.16597/J. CNKI. ISSN. 1002-154x. 2017.06.002.
[17]	Lee wing-shing. Prediction of glass transition temperature of polyaramid based on group contribution method and Molecular dynamics method [D]. Nanhua University, 2017.
[18]	Jiang Chuan. IR spectroscopic Chemometrics characterization of Nifedipine Solid dispersion [D]. Nanjing Normal University, 2015.
[19]	Wang Xiaoyan. Software development of chemical database system [D]. Qingdao University of Science and Technology, 2012.
[20]	Gong Wen. Study on thermodynamic physical properties modeling and calculation method based on flow and unit [D]. Zhejiang University, 2015.

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhao Mingrui, Liu Guangyu. (2023). Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharmaceutical Science and Technology, 7(2), 27-32. https://doi.org/10.11648/j.pst.20230702.12

Copy | Download

ACS Style

Zhao Mingrui; Liu Guangyu. Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharm. Sci. Technol. 2023, 7(2), 27-32. doi: 10.11648/j.pst.20230702.12

Copy | Download

AMA Style

Zhao Mingrui, Liu Guangyu. Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharm Sci Technol. 2023;7(2):27-32. doi: 10.11648/j.pst.20230702.12

Copy | Download

@article{10.11648/j.pst.20230702.12,
  author = {Zhao Mingrui and Liu Guangyu},
  title = {Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method},
  journal = {Pharmaceutical Science and Technology},
  volume = {7},
  number = {2},
  pages = {27-32},
  doi = {10.11648/j.pst.20230702.12},
  url = {https://doi.org/10.11648/j.pst.20230702.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.pst.20230702.12},
  abstract = {Objective: Nifedipine is a calcium channel antagonist of dihydropyridine. There are many methods to synthesize nifedipine, but the yield is not high. In order to find a suitable process for the synthesis and industrialization of nifedipine, thermodynamic Parameters of Nifedipine had been estimated by Group Contribution Method. Methods: the standard molar enthalpy of reaction, standard isobaric heat capacity, residual entropy, the melting temperature and the flash point temperature of nifedipine were estimated by Joback method. Results: The results show that the standard molar reaction enthalpy of Nifedipine was estimated estimated by Joback method is , standard molar isobaric heat capacity is 108800J•mol-1•K-1 and residual entropy of nifedipine estimated by Joback method is  at 290.15 K and atmospheric pressure which match with the datas of experiment. However the melting temperature and the flash point temperatureof nifedipine was estimated by Joback method is 1074.02 K and 969.98 K seperately, which have large gap between the estamated datas and the reality, and still need to revise. Coclusion: the thermodynamic parameters of nifedipine can be estimated by Joback group contribution method. Its corresponding data will provide essential support for industrial design and further theoretical studies.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method
AU  - Zhao Mingrui
AU  - Liu Guangyu
Y1  - 2023/10/14
PY  - 2023
N1  - https://doi.org/10.11648/j.pst.20230702.12
DO  - 10.11648/j.pst.20230702.12
T2  - Pharmaceutical Science and Technology
JF  - Pharmaceutical Science and Technology
JO  - Pharmaceutical Science and Technology
SP  - 27
EP  - 32
PB  - Science Publishing Group
SN  - 2640-4540
UR  - https://doi.org/10.11648/j.pst.20230702.12
AB  - Objective: Nifedipine is a calcium channel antagonist of dihydropyridine. There are many methods to synthesize nifedipine, but the yield is not high. In order to find a suitable process for the synthesis and industrialization of nifedipine, thermodynamic Parameters of Nifedipine had been estimated by Group Contribution Method. Methods: the standard molar enthalpy of reaction, standard isobaric heat capacity, residual entropy, the melting temperature and the flash point temperature of nifedipine were estimated by Joback method. Results: The results show that the standard molar reaction enthalpy of Nifedipine was estimated estimated by Joback method is , standard molar isobaric heat capacity is 108800J•mol-1•K-1 and residual entropy of nifedipine estimated by Joback method is  at 290.15 K and atmospheric pressure which match with the datas of experiment. However the melting temperature and the flash point temperatureof nifedipine was estimated by Joback method is 1074.02 K and 969.98 K seperately, which have large gap between the estamated datas and the reality, and still need to revise. Coclusion: the thermodynamic parameters of nifedipine can be estimated by Joback group contribution method. Its corresponding data will provide essential support for industrial design and further theoretical studies.
VL  - 7
IS  - 2
ER  -

Copy | Download

Author Information

Zhao Mingrui

College of Pharmacy, Henan Medical College, Zhengzhou, China
Liu Guangyu

College of Chemical Engineering, He’nan University of Technology, Zhengzhou, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhao Mingrui, Liu Guangyu. (2023). Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharmaceutical Science and Technology, 7(2), 27-32. https://doi.org/10.11648/j.pst.20230702.12

Copy | Download

ACS Style

Zhao Mingrui; Liu Guangyu. Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharm. Sci. Technol. 2023, 7(2), 27-32. doi: 10.11648/j.pst.20230702.12

Copy | Download

AMA Style

Zhao Mingrui, Liu Guangyu. Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method. Pharm Sci Technol. 2023;7(2):27-32. doi: 10.11648/j.pst.20230702.12

Copy | Download

@article{10.11648/j.pst.20230702.12,
  author = {Zhao Mingrui and Liu Guangyu},
  title = {Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method},
  journal = {Pharmaceutical Science and Technology},
  volume = {7},
  number = {2},
  pages = {27-32},
  doi = {10.11648/j.pst.20230702.12},
  url = {https://doi.org/10.11648/j.pst.20230702.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.pst.20230702.12},
  abstract = {Objective: Nifedipine is a calcium channel antagonist of dihydropyridine. There are many methods to synthesize nifedipine, but the yield is not high. In order to find a suitable process for the synthesis and industrialization of nifedipine, thermodynamic Parameters of Nifedipine had been estimated by Group Contribution Method. Methods: the standard molar enthalpy of reaction, standard isobaric heat capacity, residual entropy, the melting temperature and the flash point temperature of nifedipine were estimated by Joback method. Results: The results show that the standard molar reaction enthalpy of Nifedipine was estimated estimated by Joback method is , standard molar isobaric heat capacity is 108800J•mol-1•K-1 and residual entropy of nifedipine estimated by Joback method is  at 290.15 K and atmospheric pressure which match with the datas of experiment. However the melting temperature and the flash point temperatureof nifedipine was estimated by Joback method is 1074.02 K and 969.98 K seperately, which have large gap between the estamated datas and the reality, and still need to revise. Coclusion: the thermodynamic parameters of nifedipine can be estimated by Joback group contribution method. Its corresponding data will provide essential support for industrial design and further theoretical studies.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Estimated Thermodynamic Parameters of Nifedipine by Group Contribution Method
AU  - Zhao Mingrui
AU  - Liu Guangyu
Y1  - 2023/10/14
PY  - 2023
N1  - https://doi.org/10.11648/j.pst.20230702.12
DO  - 10.11648/j.pst.20230702.12
T2  - Pharmaceutical Science and Technology
JF  - Pharmaceutical Science and Technology
JO  - Pharmaceutical Science and Technology
SP  - 27
EP  - 32
PB  - Science Publishing Group
SN  - 2640-4540
UR  - https://doi.org/10.11648/j.pst.20230702.12
AB  - Objective: Nifedipine is a calcium channel antagonist of dihydropyridine. There are many methods to synthesize nifedipine, but the yield is not high. In order to find a suitable process for the synthesis and industrialization of nifedipine, thermodynamic Parameters of Nifedipine had been estimated by Group Contribution Method. Methods: the standard molar enthalpy of reaction, standard isobaric heat capacity, residual entropy, the melting temperature and the flash point temperature of nifedipine were estimated by Joback method. Results: The results show that the standard molar reaction enthalpy of Nifedipine was estimated estimated by Joback method is , standard molar isobaric heat capacity is 108800J•mol-1•K-1 and residual entropy of nifedipine estimated by Joback method is  at 290.15 K and atmospheric pressure which match with the datas of experiment. However the melting temperature and the flash point temperatureof nifedipine was estimated by Joback method is 1074.02 K and 969.98 K seperately, which have large gap between the estamated datas and the reality, and still need to revise. Coclusion: the thermodynamic parameters of nifedipine can be estimated by Joback group contribution method. Its corresponding data will provide essential support for industrial design and further theoretical studies.
VL  - 7
IS  - 2
ER  -

Copy | Download