| Peer-Reviewed

Replacement of Natural Sand by Crushed Sand in the Concrete

Received: 20 December 2016     Accepted: 30 December 2016     Published: 25 January 2017
Views:       Downloads:
Abstract

Nowadays it is very important to make the concrete economical. Therefore the present work has initiated to make the concrete economical by replacing the natural sand by crushed sand in the concrete. From our study it is concluded that different Crushed sand gives different results for compressive strength depending on different quarries and from study of different research paper at 40% to 50% replacement of crushed sand the maximum compressive strength is obtained. The maximum tensile strength of concrete is obtain at 60% and 70% replacement of natural sand with Crushed sand. The concrete with crushed sand performed better than concrete with natural sand as the property of crush sand is better than that of natural sand.

Published in Landscape Architecture and Regional Planning (Volume 2, Issue 1)
DOI 10.11648/j.larp.20170201.12
Page(s) 13-22
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Natural Sand, Crushed Sand, Concrete, Compressive Strength and Tensile Strength

References
[1] IS 456-2000 (Reaffirmed 2005): ''Plain and Reinforced Concrete-Code of Practice''.
[2] B Balapgol, S A Kulkarni, K M Bajoria, “Strength and durability of concrete with crushed sand”, 27th Conference on OUR WORLD IN CONCRETE & STRUCTURES: 29 - 30 August 2002, Singapore, pp179-184.
[3] Ahmed, A. E. and EI. Kourd A. A. ( 1989), ‘Properties of concrete incorporating natural sand and crushed stone very fine sand’, American Concrete Journal, 86 (4), 417-424.
[4] Sahu A. K., Kumar S. and Sachan A. K. ‘Crushed Stone waste as Fine Aggregates for concrete’, Indian concrete Journal.
[5] Ilangovana, R. Mahendrana, N. and Nagamanib, K. (2008), ‘Strength and durability properties of concrete containing crush sand as fine aggregates’, ARPN Journal of Engineering and Applied Science, Vol.3 (5),pp 2026.
[6] M. L. Gambhir, (2006), Concrete technology, Tata McGraw Hill Publishing Co. Ltd, India.
[7] BIS Code IS: 10262-1982. Concrete Mix Proportioning – Guidelines.
[8] Shaikh, M. G., Daimi, S. A. (2011), Durability studies of concrete made by using artificial sand with dust and natural sand, International Journal of Earth Sciences and Engineering (ISSN 0974-5904), Vol. 04, No. 06 SPL, pp 823-825.
[9] BIS Code IS: 383-1970. “Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, (Second Revision).
[10] BIS Code IS: 516–1959. Code of Practice for Methods of Tests for Strength of Concrete.
[11] Nimitha Vijayaraghavan and A. S. Wayal “Effect of manufactured sand on compressive strength and workability of concrete”International Journal of Structural and Civil Engineering Research, Vol 02, No 04, Nov 2013., pp229-232.
[12] Ilangovan, R.; Nagamani, K., and Kumarasamy, K., “Studies on strength and behaviour of concrete by using crushed rock dust as fine aggregate,” Civil Engineering and Construction Review, October 2006, pp. 924-932.
[13] Ahmed, A. E. and EI. Kourd A. A. ( 1989), ‘Properties of concrete incorporating natural sand and crushed stone very fine sand’, American Concrete Journal, 86 (4), 417-424.
[14] Dan Ravina ‘Fly Ash to Improve the Workability of Structure Concrete made with Crushed sand as Fine Aggregate’, National Building Research Institute, Technion – Israel Institute of Technology.
[15] Indian Standard code of practice for Methods of Test for Strength of Concrete. I. S. 516-1959, Bureau of Indian Standards, New Delhi.
Cite This Article
  • APA Style

    Rameshwar S. Ingalkar, Shrikant M. Harle. (2017). Replacement of Natural Sand by Crushed Sand in the Concrete. Landscape Architecture and Regional Planning, 2(1), 13-22. https://doi.org/10.11648/j.larp.20170201.12

    Copy | Download

    ACS Style

    Rameshwar S. Ingalkar; Shrikant M. Harle. Replacement of Natural Sand by Crushed Sand in the Concrete. Landsc. Archit. Reg. Plan. 2017, 2(1), 13-22. doi: 10.11648/j.larp.20170201.12

    Copy | Download

    AMA Style

    Rameshwar S. Ingalkar, Shrikant M. Harle. Replacement of Natural Sand by Crushed Sand in the Concrete. Landsc Archit Reg Plan. 2017;2(1):13-22. doi: 10.11648/j.larp.20170201.12

    Copy | Download

  • @article{10.11648/j.larp.20170201.12,
      author = {Rameshwar S. Ingalkar and Shrikant M. Harle},
      title = {Replacement of Natural Sand by Crushed Sand in the Concrete},
      journal = {Landscape Architecture and Regional Planning},
      volume = {2},
      number = {1},
      pages = {13-22},
      doi = {10.11648/j.larp.20170201.12},
      url = {https://doi.org/10.11648/j.larp.20170201.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.larp.20170201.12},
      abstract = {Nowadays it is very important to make the concrete economical. Therefore the present work has initiated to make the concrete economical by replacing the natural sand by crushed sand in the concrete. From our study it is concluded that different Crushed sand gives different results for compressive strength depending on different quarries and from study of different research paper at 40% to 50% replacement of crushed sand the maximum compressive strength is obtained. The maximum tensile strength of concrete is obtain at 60% and 70% replacement of natural sand with Crushed sand. The concrete with crushed sand performed better than concrete with natural sand as the property of crush sand is better than that of natural sand.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Replacement of Natural Sand by Crushed Sand in the Concrete
    AU  - Rameshwar S. Ingalkar
    AU  - Shrikant M. Harle
    Y1  - 2017/01/25
    PY  - 2017
    N1  - https://doi.org/10.11648/j.larp.20170201.12
    DO  - 10.11648/j.larp.20170201.12
    T2  - Landscape Architecture and Regional Planning
    JF  - Landscape Architecture and Regional Planning
    JO  - Landscape Architecture and Regional Planning
    SP  - 13
    EP  - 22
    PB  - Science Publishing Group
    SN  - 2637-4374
    UR  - https://doi.org/10.11648/j.larp.20170201.12
    AB  - Nowadays it is very important to make the concrete economical. Therefore the present work has initiated to make the concrete economical by replacing the natural sand by crushed sand in the concrete. From our study it is concluded that different Crushed sand gives different results for compressive strength depending on different quarries and from study of different research paper at 40% to 50% replacement of crushed sand the maximum compressive strength is obtained. The maximum tensile strength of concrete is obtain at 60% and 70% replacement of natural sand with Crushed sand. The concrete with crushed sand performed better than concrete with natural sand as the property of crush sand is better than that of natural sand.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, Prof Ram Meghe College of Engineering and Management, Badnera, Maharashtra, India

  • Department of Civil Engineering, Prof Ram Meghe College of Engineering and Management, Badnera, Maharashtra, India

  • Sections