The balancing machine is equipment used for the following- determining the proper location and amount of balance work in a rotor (applicable in a motor amerture) – determining the position and magnitude of a given mass to balance the unbalance centrifugal effect of a system (this is applicable in determining automobile crankshaft mass distribution. This equipment was designed and constructed for the use of the Faculty Engineering, Lagos State University the Mechanics of Machine Laboratory since the possibility of acquiring one is remote due to the non-availability of the hard currency needed. Moreover the need to take students outside the university to use the equipment has totally been eliminated thereby saving valuable time and cost. The objective of looking inwards towards technology acquisition is also manifested.
| Published in | International Journal of Science, Technology and Society (Volume 5, Issue 3) |
| DOI | 10.11648/j.ijsts.20170503.13 |
| Page(s) | 41-45 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2017. Published by Science Publishing Group |
Design, Mass Distribution, Technology, Acquisition
| [1] | Douglas M and Stade/boker D. G (1963) Balancing of rotating machinery shock and vibration handbooks migracohill Bogle New York. |
| [2] | Lissaman A. J and Martin S. J. (1983) Principle of engineering production Elbs London. |
| [3] | McQueavy D. E. (1973) understanding balancing machines. American machinist special report 656 New York. |
| [4] | Oviawe M. I. (1980) Studies of Rotary Engines for Automobile HND project 35780 Yaba college of Technology. |
| [5] | Redford G. D (1966) Mechanical Engineering Design an introduction Macmillan Publishers London. |
| [6] | Reinging K. D &Desroechers A. A. (1986 -88) Disturbance Accommodating controllers for rotating mechanical systems. Transaction of the ASME- journal of Dynamic systems, measurement & control Vol 108-110(1986-1988). |
| [7] | Ryder G. H (1986) Strength of material Macmillan Publishers London. |
| [8] | Shigley, J. E and Vicker, J J. (1980) “Theory of Machines and Mechanisms” McGraw Hill Inc. |
| [9] | Thearle, E. L and Scheuetady, N. Y., (1994) “Dynamic Balancing of Rotating Machinery in the Field” ASME Transactions vol 56. |
| [10] | Baumeister, T et. al (1988) Marks Standard Handbook of Mechanical Engineers. McGraw Hill company New York. |
APA Style
Patrick Adebisi Olusegun Adegbuyi, Fadipe Opeyemi Lukuman. (2017). Design and Construction of an Improved Balancing Machine. International Journal of Science, Technology and Society, 5(3), 41-45. https://doi.org/10.11648/j.ijsts.20170503.13
ACS Style
Patrick Adebisi Olusegun Adegbuyi; Fadipe Opeyemi Lukuman. Design and Construction of an Improved Balancing Machine. Int. J. Sci. Technol. Soc. 2017, 5(3), 41-45. doi: 10.11648/j.ijsts.20170503.13
AMA Style
Patrick Adebisi Olusegun Adegbuyi, Fadipe Opeyemi Lukuman. Design and Construction of an Improved Balancing Machine. Int J Sci Technol Soc. 2017;5(3):41-45. doi: 10.11648/j.ijsts.20170503.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijsts.20170503.13,
author = {Patrick Adebisi Olusegun Adegbuyi and Fadipe Opeyemi Lukuman},
title = {Design and Construction of an Improved Balancing Machine},
journal = {International Journal of Science, Technology and Society},
volume = {5},
number = {3},
pages = {41-45},
doi = {10.11648/j.ijsts.20170503.13},
url = {https://doi.org/10.11648/j.ijsts.20170503.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsts.20170503.13},
abstract = {The balancing machine is equipment used for the following- determining the proper location and amount of balance work in a rotor (applicable in a motor amerture) – determining the position and magnitude of a given mass to balance the unbalance centrifugal effect of a system (this is applicable in determining automobile crankshaft mass distribution. This equipment was designed and constructed for the use of the Faculty Engineering, Lagos State University the Mechanics of Machine Laboratory since the possibility of acquiring one is remote due to the non-availability of the hard currency needed. Moreover the need to take students outside the university to use the equipment has totally been eliminated thereby saving valuable time and cost. The objective of looking inwards towards technology acquisition is also manifested.},
year = {2017}
}
TY - JOUR T1 - Design and Construction of an Improved Balancing Machine AU - Patrick Adebisi Olusegun Adegbuyi AU - Fadipe Opeyemi Lukuman Y1 - 2017/05/25 PY - 2017 N1 - https://doi.org/10.11648/j.ijsts.20170503.13 DO - 10.11648/j.ijsts.20170503.13 T2 - International Journal of Science, Technology and Society JF - International Journal of Science, Technology and Society JO - International Journal of Science, Technology and Society SP - 41 EP - 45 PB - Science Publishing Group SN - 2330-7420 UR - https://doi.org/10.11648/j.ijsts.20170503.13 AB - The balancing machine is equipment used for the following- determining the proper location and amount of balance work in a rotor (applicable in a motor amerture) – determining the position and magnitude of a given mass to balance the unbalance centrifugal effect of a system (this is applicable in determining automobile crankshaft mass distribution. This equipment was designed and constructed for the use of the Faculty Engineering, Lagos State University the Mechanics of Machine Laboratory since the possibility of acquiring one is remote due to the non-availability of the hard currency needed. Moreover the need to take students outside the university to use the equipment has totally been eliminated thereby saving valuable time and cost. The objective of looking inwards towards technology acquisition is also manifested. VL - 5 IS - 3 ER -
Information
Email: