Bent products have recently been applied widely in various structures. The method of sharp bending has the advantage of producing bent products with a fine appearance. Meanwhile, it has been recently shown that origami forming can be applied as a free manufacturing method that creates a fine appearance using complex folding lines. Sharp bending and origami forming both require folding lines. Folding lines are produced to make a V-groove before bending. Cutting V-grooves for folding lines requires machining center plants and long working times, which are not suitable for mass production. This paper presents newly developed and convenient V-shaped punch tools for folding line processing in sharp bending and origami forming. As a result, origami forming is expected to be adopted as a press method using V-shaped punch tools. Additionally, this paper reports on the findings of deformation behavior and mechanism obtained in experiments on folding line processing. The investigation for three-dimensional plate deformation around the V-shaped punch terminal shows extended folding line by terminal effect. Phenomena and the required load of V-shape punch indentation are considered in determining the mechanism of V-shape punch indentation from the results of finite element analyses and experiments on groove formation using V-shaped punch tool system.
| Published in | International Journal of Mechanical Engineering and Applications (Volume 9, Issue 6) |
| DOI | 10.11648/j.ijmea.20210906.13 |
| Page(s) | 98-112 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Sharp Bending, V-shaped Punch, Press, Mechanism, FEM, Origami Forming
| [1] | Ogawa, H. and Makinouchi, A., Sharp bending of sheet metal with indentation of V-shaped punch, Journal of the Japan society for technology of plasticity, Vol. 40, No. 459 (1999), pp. 338-342 (in Japanese). |
| [2] | Nguyen, T. T. H., Terada, K., Tokura, S. and Hagiwara, I., Development of origami forming to improve the flexibility of truss core panel design, Transactions of the JSME (in Japanese), Vol. 80, No. 819 (2014), DOI: 10.1299/transjsme.2014smm0314. |
| [3] | Terada, K., Tokura, S., Sato, H., Makita, A. and Hagiwara, I., Evaluation of the Bending Stiffness on Assembled Light Weight and High Strength Panel, Transactions of the JSME (in Japanese), Vol. 81, No. 828 (2015), DOI: 10.1299/transjsme.15-00039. |
| [4] | Terada, K., Tokura, S., Takahashi, T. and Hagiwara, I., Practical Development of ATCP (Assembly truss core panel), RESEARCH REPORTS National Institute of Technology, Fukushima College, Vol. 58 (2017), pp. 1-8 (in Japanese). |
| [5] | Terada, K. and Hagiwara, I., Freely manufacturing methods such as origami forming, Journal of the Japan Society of Mechanical Engineers, Vol. 119, No. 1175 (2016), pp. 564-565 (in Japanese). |
| [6] | Terada, K., Deformation mechanism in Gripper bending process, Bulletin of the Japan society for technology of plasticity, Vol. 1, No. 3 (2018), pp. 195-199 (in Japanese). |
| [7] | Tokura, S. and Hagiwara, I., Forming process simulation of truss core panel, Transactions of the Japan Society of Mechanical Engineers, Series A, Vol. 74, No. 746 (2008), pp. 1379-1385 (in Japanese). |
| [8] | Tokura, S. and Hagiwara, I., Forming Process Simulation of Truss Core Panel, Journal of Computational Science and Technology, Vol. 4 (2010), No. 1, pp. 25-35 (Release Date: March 30, 2010). |
| [9] | Tokura, S. and Hagiwara, I., A Study for the Influence of Work Hardening on Bending Stiffness of Truss Core Panel, J. Appl. Mech., Vol. 77/031010-1-031010-6(2010-5). |
| [10] | Abe, A., Terada, K., Yashiro, H. and Hagiwara, I., Characteristics of truss core created by origami forming method, Proceedings of the ASME 2019 IDETC/CIE 2019. |
| [11] | Abe, A., Yashiro, H. and Hagiwara, I., Development of vertical incident sound insulation simulation technology using finite element method and application to lightweight core, Transaction of the JSME (in Japanese), Vol. 86, No. 891 (2020), DOI: 10.1299/transjsme.20-00126. |
| [12] | Toda, M., Research on deformation resistance of steel under forging conditions, Osaka University Doctoral Thesis Graduate School of Engineering and Science (1999) (in Japanese). |
| [13] | Yoshida, Y., and Ishikawa, T., Evaluation Tests of Flow Stress and Workability in Forging, Journal of the Japan society for technology of plasticity, Vol. 50, No. 577 (2009), pp. 93-97 (in Japanese). |
| [14] | Livermore Software Technology Corporation, LS-DYNA User’s Manual (Version R7.0) (2014), JSOL Corporation (in Japanese). |
| [15] | Nagata, S. and Yanagimoto, J., Fundamentals in Metal Forming (revised Edition) (1997), p. 22, CORONA PUBLISHING CO (in Japanese). |
APA Style
Kosuke Terada, Ichiro Hagiwara. (2021). Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System. International Journal of Mechanical Engineering and Applications, 9(6), 98-112. https://doi.org/10.11648/j.ijmea.20210906.13
ACS Style
Kosuke Terada; Ichiro Hagiwara. Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System. Int. J. Mech. Eng. Appl. 2021, 9(6), 98-112. doi: 10.11648/j.ijmea.20210906.13
AMA Style
Kosuke Terada, Ichiro Hagiwara. Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System. Int J Mech Eng Appl. 2021;9(6):98-112. doi: 10.11648/j.ijmea.20210906.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijmea.20210906.13,
author = {Kosuke Terada and Ichiro Hagiwara},
title = {Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System},
journal = {International Journal of Mechanical Engineering and Applications},
volume = {9},
number = {6},
pages = {98-112},
doi = {10.11648/j.ijmea.20210906.13},
url = {https://doi.org/10.11648/j.ijmea.20210906.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20210906.13},
abstract = {Bent products have recently been applied widely in various structures. The method of sharp bending has the advantage of producing bent products with a fine appearance. Meanwhile, it has been recently shown that origami forming can be applied as a free manufacturing method that creates a fine appearance using complex folding lines. Sharp bending and origami forming both require folding lines. Folding lines are produced to make a V-groove before bending. Cutting V-grooves for folding lines requires machining center plants and long working times, which are not suitable for mass production. This paper presents newly developed and convenient V-shaped punch tools for folding line processing in sharp bending and origami forming. As a result, origami forming is expected to be adopted as a press method using V-shaped punch tools. Additionally, this paper reports on the findings of deformation behavior and mechanism obtained in experiments on folding line processing. The investigation for three-dimensional plate deformation around the V-shaped punch terminal shows extended folding line by terminal effect. Phenomena and the required load of V-shape punch indentation are considered in determining the mechanism of V-shape punch indentation from the results of finite element analyses and experiments on groove formation using V-shaped punch tool system.},
year = {2021}
}
TY - JOUR T1 - Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System AU - Kosuke Terada AU - Ichiro Hagiwara Y1 - 2021/12/24 PY - 2021 N1 - https://doi.org/10.11648/j.ijmea.20210906.13 DO - 10.11648/j.ijmea.20210906.13 T2 - International Journal of Mechanical Engineering and Applications JF - International Journal of Mechanical Engineering and Applications JO - International Journal of Mechanical Engineering and Applications SP - 98 EP - 112 PB - Science Publishing Group SN - 2330-0248 UR - https://doi.org/10.11648/j.ijmea.20210906.13 AB - Bent products have recently been applied widely in various structures. The method of sharp bending has the advantage of producing bent products with a fine appearance. Meanwhile, it has been recently shown that origami forming can be applied as a free manufacturing method that creates a fine appearance using complex folding lines. Sharp bending and origami forming both require folding lines. Folding lines are produced to make a V-groove before bending. Cutting V-grooves for folding lines requires machining center plants and long working times, which are not suitable for mass production. This paper presents newly developed and convenient V-shaped punch tools for folding line processing in sharp bending and origami forming. As a result, origami forming is expected to be adopted as a press method using V-shaped punch tools. Additionally, this paper reports on the findings of deformation behavior and mechanism obtained in experiments on folding line processing. The investigation for three-dimensional plate deformation around the V-shaped punch terminal shows extended folding line by terminal effect. Phenomena and the required load of V-shape punch indentation are considered in determining the mechanism of V-shape punch indentation from the results of finite element analyses and experiments on groove formation using V-shaped punch tool system. VL - 9 IS - 6 ER -
Information
Email: