| Peer-Reviewed

Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field

Received: 30 November 2014     Accepted: 16 December 2014     Published: 22 December 2014
Views:       Downloads:
Abstract

Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.

Published in International Journal of Mechanical Engineering and Applications (Volume 2, Issue 6)
DOI 10.11648/j.ijmea.20140206.15
Page(s) 111-116
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Retentivity, Magnetic Anisotropy, Saturation Magnetization

References
[1] W. H. Meiklejohn and C. P. Bean, “New Magnetic Anisotropy,” Physical Review, vol. 105, N. 3, pp. 904–913, February 1957.
[2] Andrei V. Palii, Boris S. Tsukerblat, Eugenio Coronado, Juan M. Clemente-Juan, Juan J. Borrás-Almenar, “Orbitally dependent kinetic Exchange in cobalt (II) pairs:origin of the magnetic anisotropy,” Polyhedron, vol. 22, pp. 2537-2544, February 2003.
[3] Giselher Herzer, “Nanocrystalline soft magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 157/158, pp. 133-136, 1996.
[4] Tadeusz Kulik, Antonio Hernando,“Magnetic properties of Fe76.5-xCu1NbxSi13.5B9 alloys nanocrystallized from amorphous state,” Journal of Magnetism and Magnetic Materials, vol. 160, pp. 269-270, 1996.
[5] V. Franco, C. F. Conde, A. Conde, “Changes in magnetic anisotropy distribution during structural evolution of Fe76Si10.5B9.5Cu1Nb3,” Journal of Magnetism and Magnetic Materials, vol. 185, pp. 353-359, 1998.
[6] Simon Foner, “Versatile and Sensitive Vibrating-Sample Magnetometer,” The Review of Scientific Instruments, vol. 30, pp. 548-557, July 1959.
[7] David Jiles, Introduction to Magnetism and Magnetic Materials, 1st ed., Chapman and Hall, 1991, pp. 49–52.
[8] Shoshin Chikazumi, Physics of Magnetism, 1st ed., John Wiley and Sons, 1964, pp. 554.
[9] B. D. Cullity, Introduction to Magnetic Materials, Addison-Wesley Publishing Company, Inc., 1972, pp. 225-229.
[10] R. S. Popovic, J. A. Flanagan, P. A. Besse, “The future of magnetic sensors,” Sensors and Actuators A, vol. 56, pp. 39-55, 1996.
[11] G. Herzer, M. Vázquez, M. Knobel, A. Zhukov, T. Reininger, H. A. Davies, R. Grössinger, J. L. Sánchez Ll, “Round table discussion: Present and future applications of nanocrystalline magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 294, pp. 252-266, 2005.
[12] C. Miguel, A. Zhukov, J. J. del Val. J. Gonzáles, “Coercivity and induced magnetic anisotropy by stress and/or field annealing in Fe- and Co- based (Finemet-type) amorphous alloys,” Journal of Magnetism and Magnetic Materials, vol. 294, pp. 245-251, 2005.
[13] N. Murillo, J. González, “Effect of the annealing conditions and grain size on the soft magnetic character of FeCu(Nb/Ta)SiB nanocrystalline alloys,” Journal of Magnetism and Magnetic Materials, vol. 218, pp. 53-59, March 2000.
[14] R. Schäfer, S. Roth, C. Stiller J. Eckert, U. Klement and L. Schultz, “ Domain Studies on Mechanically Alloyed Fe-Zr-B-Cu- Nanocrystalline Powder,” IEEE Transactions on Magnetics, vol. 32, No. 5, pp. 4383-4385, 1996.
[15] R. Valenzuela and J. T. S. Irvine, “Domain Wall dynamics and short-range order in ferromagnetic amorphous ribbons,” Journal of Non-Crystalline Solids, vol. 156-158, pp. 315-318, 1993.
[16] Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Rafael Zamorano Ulloa, “Nanocrystallization in Fe73.5Si13.5B9Mo3Cu1 amorphous ribbon and its magnetic properties,” Materials Science Forum, vol. 691, pp. 77-82, 2011.
[17] P. Kwapuliński, A. Chrobak, G. Haneczok, Z. Stokłlosa, J. Rasek, “Structural relaxation and magnetic properties of Fe86-xNbxB14 amorphous alloys,” Journal of Magnetism and Magnetic Materials, vol. 304, pp. e654-e656, March 2006.
[18] E. Illeková, D. Janičkovič, M. Miglierini, I. Škorvánek, P. Švec, “Influence of Fe/B ratio on thermodynamic properties of amorphous Fe-Mo-Cu-B,” Journal of Magnetism and Magnetic Materials, vol. 304, pp. e636-e638, March 2006.
Cite This Article
  • APA Style

    Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. (2014). Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. International Journal of Mechanical Engineering and Applications, 2(6), 111-116. https://doi.org/10.11648/j.ijmea.20140206.15

    Copy | Download

    ACS Style

    Arturo Mendoza Castrejón; Herlinda Montiel Sánchez; Guillermo Alvarez Lucio; Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int. J. Mech. Eng. Appl. 2014, 2(6), 111-116. doi: 10.11648/j.ijmea.20140206.15

    Copy | Download

    AMA Style

    Arturo Mendoza Castrejón, Herlinda Montiel Sánchez, Guillermo Alvarez Lucio, Damasio Morales Cruz. Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field. Int J Mech Eng Appl. 2014;2(6):111-116. doi: 10.11648/j.ijmea.20140206.15

    Copy | Download

  • @article{10.11648/j.ijmea.20140206.15,
      author = {Arturo Mendoza Castrejón and Herlinda Montiel Sánchez and Guillermo Alvarez Lucio and Damasio Morales Cruz},
      title = {Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {2},
      number = {6},
      pages = {111-116},
      doi = {10.11648/j.ijmea.20140206.15},
      url = {https://doi.org/10.11648/j.ijmea.20140206.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20140206.15},
      abstract = {Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Characterization of Amorphous Ribbon by Means Vibrating Sample Magnetometry as an Interesting Tool to Investigate a Possible Detector of Vector Field
    AU  - Arturo Mendoza Castrejón
    AU  - Herlinda Montiel Sánchez
    AU  - Guillermo Alvarez Lucio
    AU  - Damasio Morales Cruz
    Y1  - 2014/12/22
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.20140206.15
    DO  - 10.11648/j.ijmea.20140206.15
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 111
    EP  - 116
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.20140206.15
    AB  - Characterization of amorphous ribbon is made by using Vibrating Sample Magnetometry VSM technique with different geometric arrangements: P10, P190, P20 and P290. The purpose is to determine the evolution of the saturation magnetization MS, retentivity MR and magnetic anisotropy K1 as a function of annealing time treatment and also as a function of the geometric arrangement. The rate of change of magnetization ∆M/∆H is determined for orientation P190 and orientation P290. These values of rate of change for the ribbon with no annealing treatment are: 0.122 emu/cm3 and 0.11 emu/cm3, respectively. The highest values of anisotropy are for orientation P190 and for orientation P290, these values are: K1 = 2,365,100 erg/cm3 and K1 = 2,405,520 erg/cm3, respectively. Thus we establish that the amorphous ribbon is a strong candidate for technological applications in the area of the magnetic industry, because they can be designed vector field detectors in three directions: longitudinal, transverse (to the ribbon axis) and normal to ribbon plane.
    VL  - 2
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • School of Mechanical and Electrical Engineering -IPN, 07738, U. P. Adolfo López Mateos, D. F., México

  • Technosciences Department, Center for Applied Science and Technology Development -UNAM, 04510, C.U., D. F., México

  • School of Physics and Mathematics -IPN, 07738, U. P. Adolfo López Mateos, D. F., México

  • School of Mechanical and Electrical Engineering -IPN, 07738, U. P. Adolfo López Mateos, D. F., México

  • Sections