Kanban is credited as a major means to controlling the inventory within a manufacturing system. Determining the optimum number of Kanban is of great interest for manufacturing industries. To fulfill this aim, an integrated modelling approach using discrete-event simulation technique and Kanban Lean tool is developed for a pull system ensuring an optimum Kanban number. This research has developed a base-case simulation model which was statistically validated using ANOVA. Initial Kanban number obtained from the mathematical model of Toyota motor company is used to obtain initial results. A Kanban integrated simulation model is developed that employed the idea of pull system that required the arrival of a customer for a product and Kanban pair to proceed through the production steps. The Kanban-Simulation integrated model is further used to test the effect of different Kanban numbers to obtain the best value of Kanban which is selected as 275. This approach has been applied on a case company involved in the manufacturing of agricultural and construction metal hand tools. The optimum Kanban number is selected by simulating the model about three performance indicators: customer waiting time, weekly throughput, and Work-in-progress. The analysis of the results obtained from the proposed integrated Kanban-simulation model showed a 76.7% reduction in the inventory level. The integrated Kanban-simulation model has also given a minimum customer waiting time of 0.84 Hrs. and a maximum throughput value of 737 Pcs of shovels. The integrated Kanban-simulation model is useful for manufacturing industries working to avoid overproduction waste and greatly reduce inventory costs.
| Published in | International Journal of Industrial and Manufacturing Systems Engineering (Volume 7, Issue 1) |
| DOI | 10.11648/j.ijimse.20220701.13 |
| Page(s) | 17-24 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Kanban, Discrete-Event Simulation, Optimization, Production Performance
| [1] | J. G. M. Golchev, "Kanban simulation model for production process optimization," Journal of engineering managment and competitivness (JEMC), pp. 55-60, 2015. |
| [2] | T. Nomura, "Module-based modelling of flow-type multi-stage manufacturing systems adopting Dual-card Kanban systems, 1065-1072," in Proceedings of the 2004 winter simulation conference, Japan, 2004. |
| [3] | T. A. W. B. L. Magana, "Impact of the planning from the Kanban system in the company's operating benefits," Sustainability/MDIP, Doi: 10.3390/su10072506, pp. 1-24, 2018. |
| [4] | G. p. Faccio, "Kanban number optimization in a supermarket warehouse feeding a mixed-model assembly system," International journal of production research, Doi: 10.1080/00207543.2012.751516, pp. 1-21, 2013. |
| [5] | R. T. Wakode, "Overview of Kanban methodology and its implementation," International journal for scientific research and development, ISSN 2321-0613, vol. 3, no. 02, pp. 2518-2521, 2015. |
| [6] | T. K. R. Pekarcikova, "Material flow optimization through E-kanban system simulation," International journal of simulation, Doi: 10.2507/IJSIMM 19.2.513, no. 1726-4529, pp. 243-254, 2020. |
| [7] | N. R. Murino, "Optimal size of Kanban board in a single stage multi product system," WSEAS Transactions on Systems and Controls, ISSN 1991-8763, vol. 5, no. 6, pp. 464-473, 2010. |
| [8] | S. Shobha, "A review of Kanban- based manufacturing systems," International journal of research and scientific innovation (IJRSI), ISSN 2321-2705, vol. 5, no. 4, pp. 244-246, 2018. |
| [9] | J. Y. H. Naufal, "Development of Kanban system at local manufacturing company in Malaysia: case study," in Procedia engineering, sciverse ScienceDirect published by ELSEVIER, Malaysia, 2012. |
| [10] | B. Triana, "Production system improvment through Kanban application in labor intensive company," Sinergi, doi.org/10.22441/sinergi.2019.1.005, vol. 23, no. 1, pp. 33-40, 2019. |
| [11] | S. Tosanovic, "Evaluation of pull production control mechanisms by simulation," Process, vol. 10, no. 5, https://doi.org/10.3390/pr1001005, pp. 1-21, 2022. |
| [12] | Y. J. H. Naufal, "The effect of optimum number of kanbans in just in time production to manufacturing performance," Applied mechanics and materials, doi: 10.4028/www.scientific.net/AMM.315.645, vol. 315, pp. 645-649, 2013. |
| [13] | B. N. C. D. Dimitrescu, "Efficiency of a production line by the application of the Kanban method," Journal of Research and Innovation for Sustainable Society (JRISS), vol. 1, no. 1, ISSN: 2668-0416, DOI: 10.33727/JRISS.2019.1.4:29-34, pp. 29-34, 2019. |
| [14] | J. Y. Adnana, "The effect of optimum number of Kanbnas in Just in Time production system to manufacturing performance," Applied Mechanics and Material, DOI: 10.4028/www.scientific.net/AMM.315.645, vol. 315, pp. 645-649, 2013. |
| [15] | H. T. Yousefi, "Determining optimum number of Kanbans for workstations in a Kanban-based manufacturing line using discrete-event simulation: a case study," in International conference on industrial engineering and operations managment, Istanbul, Turkey, 2012. |
| [16] | O. O. Ezema, "Industrial design and simulation of the JIT material handling system," Cogent engineering, vol. 4, no. 1292864, pp. 1-12, 2017. |
| [17] | B. S. Azadeh, "Design of practical optimum JIT systems by integration of computer simulation and analysis of variance," ELSVIER science direct, Computer and industrial engineering, doi: 10.1016/j.cie.2005.03.005, pp. 504-519, 2005. |
| [18] | S. L. Schindlerova, "Dynamic simulation for optimization solution of manufacturing processess," in MATEC web of conferences, doi.org/10.1051/matecconf/201824401010, Presov, Slovak Republic, 2018. |
| [19] | S. Hao, "Implementing a hybrid simulation model for a Kanbna-based material handling system," Robotics and computer-integrated manufacturing, doi: 10.1016/j.reim.2007.09.012, vol. 24, pp. 635-646, 2008. |
| [20] | C. Currie, "A practical introduction to analysis of simulation output data," in proceedings of the 2013 winter simulations conference, university of Southhampton, Southhampton, 2013. |
| [21] | G.-M. S. L. Borges, "Optimal run length for Descrete-event distributed cluster-based simulation," in ICCS 2014. 14th international conference on computational science, Barcelona, 2014. |
| [22] | S. S. Kelton, Simulation with Arena, Second edition, USA: Mac Graw Hill, 2002. |
| [23] | P. Kumar, "Literature review of JIT-Kanban systems," International journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-005-0340-2, vol. 32, pp. 393-408, 2007. |
APA Style
Angassu Girma Mullisa, Walid Abdul-Kader. (2022). Optimal Kanban Number: An Integrated Lean and Simulation Modelling Approach. International Journal of Industrial and Manufacturing Systems Engineering, 7(1), 17-24. https://doi.org/10.11648/j.ijimse.20220701.13
ACS Style
Angassu Girma Mullisa; Walid Abdul-Kader. Optimal Kanban Number: An Integrated Lean and Simulation Modelling Approach. Int. J. Ind. Manuf. Syst. Eng. 2022, 7(1), 17-24. doi: 10.11648/j.ijimse.20220701.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijimse.20220701.13,
author = {Angassu Girma Mullisa and Walid Abdul-Kader},
title = {Optimal Kanban Number: An Integrated Lean and Simulation Modelling Approach},
journal = {International Journal of Industrial and Manufacturing Systems Engineering},
volume = {7},
number = {1},
pages = {17-24},
doi = {10.11648/j.ijimse.20220701.13},
url = {https://doi.org/10.11648/j.ijimse.20220701.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijimse.20220701.13},
abstract = {Kanban is credited as a major means to controlling the inventory within a manufacturing system. Determining the optimum number of Kanban is of great interest for manufacturing industries. To fulfill this aim, an integrated modelling approach using discrete-event simulation technique and Kanban Lean tool is developed for a pull system ensuring an optimum Kanban number. This research has developed a base-case simulation model which was statistically validated using ANOVA. Initial Kanban number obtained from the mathematical model of Toyota motor company is used to obtain initial results. A Kanban integrated simulation model is developed that employed the idea of pull system that required the arrival of a customer for a product and Kanban pair to proceed through the production steps. The Kanban-Simulation integrated model is further used to test the effect of different Kanban numbers to obtain the best value of Kanban which is selected as 275. This approach has been applied on a case company involved in the manufacturing of agricultural and construction metal hand tools. The optimum Kanban number is selected by simulating the model about three performance indicators: customer waiting time, weekly throughput, and Work-in-progress. The analysis of the results obtained from the proposed integrated Kanban-simulation model showed a 76.7% reduction in the inventory level. The integrated Kanban-simulation model has also given a minimum customer waiting time of 0.84 Hrs. and a maximum throughput value of 737 Pcs of shovels. The integrated Kanban-simulation model is useful for manufacturing industries working to avoid overproduction waste and greatly reduce inventory costs.},
year = {2022}
}
TY - JOUR T1 - Optimal Kanban Number: An Integrated Lean and Simulation Modelling Approach AU - Angassu Girma Mullisa AU - Walid Abdul-Kader Y1 - 2022/03/04 PY - 2022 N1 - https://doi.org/10.11648/j.ijimse.20220701.13 DO - 10.11648/j.ijimse.20220701.13 T2 - International Journal of Industrial and Manufacturing Systems Engineering JF - International Journal of Industrial and Manufacturing Systems Engineering JO - International Journal of Industrial and Manufacturing Systems Engineering SP - 17 EP - 24 PB - Science Publishing Group SN - 2575-3142 UR - https://doi.org/10.11648/j.ijimse.20220701.13 AB - Kanban is credited as a major means to controlling the inventory within a manufacturing system. Determining the optimum number of Kanban is of great interest for manufacturing industries. To fulfill this aim, an integrated modelling approach using discrete-event simulation technique and Kanban Lean tool is developed for a pull system ensuring an optimum Kanban number. This research has developed a base-case simulation model which was statistically validated using ANOVA. Initial Kanban number obtained from the mathematical model of Toyota motor company is used to obtain initial results. A Kanban integrated simulation model is developed that employed the idea of pull system that required the arrival of a customer for a product and Kanban pair to proceed through the production steps. The Kanban-Simulation integrated model is further used to test the effect of different Kanban numbers to obtain the best value of Kanban which is selected as 275. This approach has been applied on a case company involved in the manufacturing of agricultural and construction metal hand tools. The optimum Kanban number is selected by simulating the model about three performance indicators: customer waiting time, weekly throughput, and Work-in-progress. The analysis of the results obtained from the proposed integrated Kanban-simulation model showed a 76.7% reduction in the inventory level. The integrated Kanban-simulation model has also given a minimum customer waiting time of 0.84 Hrs. and a maximum throughput value of 737 Pcs of shovels. The integrated Kanban-simulation model is useful for manufacturing industries working to avoid overproduction waste and greatly reduce inventory costs. VL - 7 IS - 1 ER -
Information
Email: