Development and Characterization of Starch Based Bioplatics Using Banana Peels

Fatima Haliru Wali; Hannatu Sani Abubakar; Abubakar Umar Birnin-Yauri; Sayudi Yahaya Haruna

doi:doi:10.11648/j.ajpst.20230902.12

| Peer-Reviewed

Development and Characterization of Starch Based Bioplatics Using Banana Peels

Fatima Haliru Wali, Hannatu Sani Abubakar, Abubakar Umar Birnin-Yauri, Sayudi Yahaya Haruna

Published in American Journal of Polymer Science and Technology (Volume 9, Issue 2)

Received: 18 April 2023 Accepted: 8 May 2023 Published: 27 July 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A number of significant issues had expedite owing to the increased use of conventional plastic, including the shortage of raw materials for the production of plastic and the buildup of non-biodegradable plastic debris on the planet. Use of ecologically friendly, biodegradable plastic made from renewable resources is one of the problem's promising solutions. The objective of this research is to describe the characteristics of the bio-plastic made from banana peels. In order to create a bioplastic using banana peel powder, a sulphuric acid catalyzed acetylation process was used in the study. The bioplastic produced from this process was then characterized by Fourier Transform Infrared (FT-IR). The FTIR spectra of the product displayed the presence of OH, C-H, C=O and C-O absorption peaks. The results of Chemical resistance test demonstrated that, the produced bioplastic was much closer to or had the same chemical resistance test as traditional plastic, allowing the prepared bioplastic to replace the latter. The new bioplastic also showed some biodegradability and was only slightly affected by acid, salt, and alkali. As a result, it was revealed that, new bioplastics with appreciable material properties could be made from agricultural waste. Hence it may be concluded that bioplastics degrades easily and faster than petroleum based plastics and can be a solution to the long lasted environmental problems caused by petroleum based plastics.

Published in	American Journal of Polymer Science and Technology (Volume 9, Issue 2)
DOI	10.11648/j.ajpst.20230902.12
Page(s)	21-25
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Starch, Bioplastic, Waste, Utilization, Banana Peels, FTIR

References

[1]	Narissara, K., Shabbir, H. G., 2013. Greenhouse Gas Evaluation and Market Opportunity of Bioplastic Bags from Cassava in Thailand. J. Sustain. Energy Environ. 4, 15–21.
[2]	Geyer, R., Jambeck, J. R., Law, K. L., 2017. Production, use, and fate of all plastics ever made. Sci. Adv. 3 (7), E1700782.
[3]	Sardon, H., Dove, A. P., 2018. Plastics recycling with a difference. Science 360 (6387), 380–381.
[4]	Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., Sahari, J., 2016. Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (Arenga pinnata) starch for food packaging. J. Food Sci. Technol. 53 (1), 326–336.
[5]	Avérous, L., Pollet, E., 2012. In: Environmental silicate nano-biocomposites, Green Energy and Technology. Springer, London, pp. 13–39.
[6]	Jones, A., Zeller, M. A., Sharma, S., 2013. Thermal, mechanical, and moisture absorption properties of egg white protein bioplastics with natural rubber and glycerol. Prog. Biomater. 2, 12.
[7]	Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., Dutta, A., 2017. A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). J. Environ. Manage. 197, 177–198.
[8]	Rochman, C. M., Browne, M. A., Halpern, B. S., Hentschel, B. T., Hoh, E., Karapanagioti, H. K., Rios-Mendoza, L. M., Takada, H., Teh, S., Thompson, R. C., 2013. Classify plastic waste as hazardous. Nature 494, 169–171.
[9]	Gregory, M., 2009. Environmental implications of plastic debris in marine settingsentanglement, ingestion, smothering, hangers-on, hitch-hiking and alien invasions. Philos. Trans. Royal Soc. Lond. B: Biolog. Sci. 364, 2013–2025.
[10]	Gasperi, J., Dris, R., Rocher, V., Tassin, B., 2015. Microplastics in the continental area: an emerging challenge. Norman Bull. 4, 18–19.
[11]	McCormick, A., Hoellein, T. J., Mason, S. A., Schluep, J., Kelly, J. J., 2014. Microplastic is an abundant and distinct microbial habitat in an urban river. Environ. Sci. Technol. 48 (20), 11863–11871.
[12]	Galloway, T. S., 2015. Marine Anthropogenic Litter. Springer, New York, pp. 343–366.
[13]	Vethaak, A. D., Leslie, H. A., 2016. Plastic Debris Is a Human Health Issue. Environ. Sci. Technol. 50, 6825–6826.
[14]	Ismail, N. A., Tahir, S. M., AbdulWahid, M. F., Khairuddin, N. E., Hashim, I., Rosli, N., Abdullah, M. A., 2016. Synthesis and Characterization of Biodegradable Starch- Based Bioplastics. Mater. Sci. Forum 846, 673–678.
[15]	Reddy, R. L., Reddy, V. S., Gupta, G. A., 2013. Study of bio-plastics as green and sustainable alternative to plastics. Int. J. Emerg. Technol. Adv. Eng. 3 (5), 76–81.
[16]	Thakur, V. K., Thakur, M. K., 2016. Handbook of Sustainable Polymers. Pan Stanford Publishing, Singapore, pp. 212–245.
[17]	Imre, B., Pukánszky, B., 2015. Compatibilization in bio-based and biodegradable polymer blends. Eur. Polym. J. 49 (6), 1215–1233.
[18]	Jiménez, A., Fabra, M. J., Talens, P., Chiralt, A., 2012. Edible and biodegradable starch films: a review. Food Bioprocess Technol. 5 (6), 2058–2076.
[19]	Zhang, Y., Rempel, C., Liu, Q., 2014. Thermoplastic starch processing and characteristics-a review. Crit. Rev. Food Sci. Nutr. 54 (10), 1353–1370.
[20]	Pérez, S., Bertoft, E., 2010. The molecular structures of starch components and their contribution to the architecture of starch granules: a comprehensive review. Starch/Stärke 62, 389–420.
[21]	Carpenter, M. A., Shaw, M., Cooper, R. D., Frew, T. J., Butler, R. C., Murray, S. R., Moya, L., Coyne, C. J., Timmerman-Vaughan, G. M., 2017. Association mapping of starch chain length distribution and amylose content in pea (Pisum sativum L.) using carbohydrate metabolism candidate genes. BMC Plant Biol. 17, 132.
[22]	Pfister, B., Sánchez-Ferrer, A., Diaz, A., Lu, K., Otto, C., Holler, M., Shaik, F. R., Florence, M., Mezzenga, R., Zeeman, S. C., 2016. Recreating the synthesis of starch granules in yeast. eLife 5, 15552.
[23]	Jain, R., Tiwari, A., 2015. Biosynthesis of planet friendly bioplastics using renewable carbon source. J. Environ. Health Sci. Eng. 13.
[24]	Guimaraes, J. L., Wypych, F., Saul, C. K., Ramos, L. P., Satyanarayana, K. G., 2010. Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from Brazil. Carbohydr. Polym. 80, 130–138.
[25]	Yun, Y. H., Wee, Y. J., Byun, H. S., Yoon, S. D., 2008. Biodegradability of chemically modified starch (RS4)/PVA blend film: Part 2. J. Polym. Environ. 16, 12–18.
[26]	Gaonkar, M. R., Prashant, P., and Navandar, R., (2018). Production of Bioplastic from Banana Peels. International Journal of Advances in Science Engineering and Technology.6 (1): ISSN2321–8991, ISSN (e): 2321 – 9009.
[27]	Nishino, T., Kotera, M., Suetsugu, M., Murakami, H., Urushihara, Y., (2011). Acetylation of plant cellulose fibre in supercritical carbondioxidePolymer. 52: 830–836. Nishino, T., Kotera, M., Suetsugu, M., Murakami, H., Urushihara, Y., (2011). Acetylation of plant cellulose fibre in supercritical carbondioxide. Polymer 52, 830–836.
[28]	Seung K. R., Woon K. L. and Soo Jin P. (2004). Thermal Decomposition of Hydrated Copper Nitrate [Cu(NO3)2 3H2O] on Activated Carbon Fibers. Carbon Science, 5 (4): 180-185.
[29]	Rusdi, S., Destian, R., Rahman, F., and Chafidz, A., (2020). Preparation and Characterization of Bio-Degradable Plastic from Banana Kepok Peel Waste. 981: 132-137. ISSN: 1662-9752.
[30]	Abubakar, H. S., Umar, A. B. Y., Muhammad, A., Yahayya, Y. and Salau, M., (2020). Preparation and Characterization of Bioplastic from Sorghum Husk. American Journal of Polymer Science and Technology. 6 (2): 14-20 http://www.sciencepublishinggroup.com/j/ajpst doi: 10.11648/j.ajpst.20200602.12 ISSN: 2575-5978 (Print); ISSN: 2575-5986 (Online).
[31]	Abubakar Umar Birnin-Yauri, Aliyu Muhammad, Ibrahim Garba Wawata, Hannatu Abubakar Sani, Mustapha Maccido, Aminu Umar, Sayudi Haruna Yahaya, Ahmad Umar. Effect of Alkali-modified Kenaf Fiber Incorporation on the Biodegradability and Hydrolytic Degradability of Used Polyethylene Material. American Journal of Polymer Science and Technology. Vol. 6, No. 1, 2020, pp. 1-9. doi: 10.11648/j.ajpst.20200601.11.
[32]	Nissa, R. C., Firiyyah, A. K., Abdullah, A. H. D., Pudjiraharti, S. (2019). Preliminary study of biodegradability of starch based bioplastics using ASTM G21-70, dip-hanging, and soil burial test methods. IOPConf. Ser. Earth Environ. Sci. 277-012007.

Cite This Article

Plain Text BibTeX RIS

APA Style

Fatima Haliru Wali, Hannatu Sani Abubakar, Abubakar Umar Birnin-Yauri, Sayudi Yahaya Haruna. (2023). Development and Characterization of Starch Based Bioplatics Using Banana Peels. American Journal of Polymer Science and Technology, 9(2), 21-25. https://doi.org/10.11648/j.ajpst.20230902.12

Copy | Download

ACS Style

Fatima Haliru Wali; Hannatu Sani Abubakar; Abubakar Umar Birnin-Yauri; Sayudi Yahaya Haruna. Development and Characterization of Starch Based Bioplatics Using Banana Peels. Am. J. Polym. Sci. Technol. 2023, 9(2), 21-25. doi: 10.11648/j.ajpst.20230902.12

Copy | Download

AMA Style

Fatima Haliru Wali, Hannatu Sani Abubakar, Abubakar Umar Birnin-Yauri, Sayudi Yahaya Haruna. Development and Characterization of Starch Based Bioplatics Using Banana Peels. Am J Polym Sci Technol. 2023;9(2):21-25. doi: 10.11648/j.ajpst.20230902.12

Copy | Download

@article{10.11648/j.ajpst.20230902.12,
  author = {Fatima Haliru Wali and Hannatu Sani Abubakar and Abubakar Umar Birnin-Yauri and Sayudi Yahaya Haruna},
  title = {Development and Characterization of Starch Based Bioplatics Using Banana Peels},
  journal = {American Journal of Polymer Science and Technology},
  volume = {9},
  number = {2},
  pages = {21-25},
  doi = {10.11648/j.ajpst.20230902.12},
  url = {https://doi.org/10.11648/j.ajpst.20230902.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20230902.12},
  abstract = {A number of significant issues had expedite owing to the increased use of conventional plastic, including the shortage of raw materials for the production of plastic and the buildup of non-biodegradable plastic debris on the planet. Use of ecologically friendly, biodegradable plastic made from renewable resources is one of the problem's promising solutions. The objective of this research is to describe the characteristics of the bio-plastic made from banana peels. In order to create a bioplastic using banana peel powder, a sulphuric acid catalyzed acetylation process was used in the study. The bioplastic produced from this process was then characterized by Fourier Transform Infrared (FT-IR). The FTIR spectra of the product displayed the presence of OH, C-H, C=O and C-O absorption peaks. The results of Chemical resistance test demonstrated that, the produced bioplastic was much closer to or had the same chemical resistance test as traditional plastic, allowing the prepared bioplastic to replace the latter. The new bioplastic also showed some biodegradability and was only slightly affected by acid, salt, and alkali. As a result, it was revealed that, new bioplastics with appreciable material properties could be made from agricultural waste. Hence it may be concluded that bioplastics degrades easily and faster than petroleum based plastics and can be a solution to the long lasted environmental problems caused by petroleum based plastics.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Development and Characterization of Starch Based Bioplatics Using Banana Peels
AU  - Fatima Haliru Wali
AU  - Hannatu Sani Abubakar
AU  - Abubakar Umar Birnin-Yauri
AU  - Sayudi Yahaya Haruna
Y1  - 2023/07/27
PY  - 2023
N1  - https://doi.org/10.11648/j.ajpst.20230902.12
DO  - 10.11648/j.ajpst.20230902.12
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 21
EP  - 25
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20230902.12
AB  - A number of significant issues had expedite owing to the increased use of conventional plastic, including the shortage of raw materials for the production of plastic and the buildup of non-biodegradable plastic debris on the planet. Use of ecologically friendly, biodegradable plastic made from renewable resources is one of the problem's promising solutions. The objective of this research is to describe the characteristics of the bio-plastic made from banana peels. In order to create a bioplastic using banana peel powder, a sulphuric acid catalyzed acetylation process was used in the study. The bioplastic produced from this process was then characterized by Fourier Transform Infrared (FT-IR). The FTIR spectra of the product displayed the presence of OH, C-H, C=O and C-O absorption peaks. The results of Chemical resistance test demonstrated that, the produced bioplastic was much closer to or had the same chemical resistance test as traditional plastic, allowing the prepared bioplastic to replace the latter. The new bioplastic also showed some biodegradability and was only slightly affected by acid, salt, and alkali. As a result, it was revealed that, new bioplastics with appreciable material properties could be made from agricultural waste. Hence it may be concluded that bioplastics degrades easily and faster than petroleum based plastics and can be a solution to the long lasted environmental problems caused by petroleum based plastics.
VL  - 9
IS  - 2
ER  -

Copy | Download

Author Information

Fatima Haliru Wali

Department of Pure and Applied Chemistry, Faculty of Physical Sciences, Kebbi State University of Science and Technology, Aleiro, Nigeria
Hannatu Sani Abubakar

Department of Pure and Applied Chemistry, Faculty of Physical Sciences, Kebbi State University of Science and Technology, Aleiro, Nigeria
Abubakar Umar Birnin-Yauri

Department of Pure and Applied Chemistry, Faculty of Physical Sciences, Kebbi State University of Science and Technology, Aleiro, Nigeria
Sayudi Yahaya Haruna

Department of Pure and Applied Chemistry, Faculty of Physical Sciences, Kebbi State University of Science and Technology, Aleiro, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Fatima Haliru Wali, Hannatu Sani Abubakar, Abubakar Umar Birnin-Yauri, Sayudi Yahaya Haruna. (2023). Development and Characterization of Starch Based Bioplatics Using Banana Peels. American Journal of Polymer Science and Technology, 9(2), 21-25. https://doi.org/10.11648/j.ajpst.20230902.12

Copy | Download

ACS Style

Fatima Haliru Wali; Hannatu Sani Abubakar; Abubakar Umar Birnin-Yauri; Sayudi Yahaya Haruna. Development and Characterization of Starch Based Bioplatics Using Banana Peels. Am. J. Polym. Sci. Technol. 2023, 9(2), 21-25. doi: 10.11648/j.ajpst.20230902.12

Copy | Download

AMA Style

Fatima Haliru Wali, Hannatu Sani Abubakar, Abubakar Umar Birnin-Yauri, Sayudi Yahaya Haruna. Development and Characterization of Starch Based Bioplatics Using Banana Peels. Am J Polym Sci Technol. 2023;9(2):21-25. doi: 10.11648/j.ajpst.20230902.12

Copy | Download

@article{10.11648/j.ajpst.20230902.12,
  author = {Fatima Haliru Wali and Hannatu Sani Abubakar and Abubakar Umar Birnin-Yauri and Sayudi Yahaya Haruna},
  title = {Development and Characterization of Starch Based Bioplatics Using Banana Peels},
  journal = {American Journal of Polymer Science and Technology},
  volume = {9},
  number = {2},
  pages = {21-25},
  doi = {10.11648/j.ajpst.20230902.12},
  url = {https://doi.org/10.11648/j.ajpst.20230902.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20230902.12},
  abstract = {A number of significant issues had expedite owing to the increased use of conventional plastic, including the shortage of raw materials for the production of plastic and the buildup of non-biodegradable plastic debris on the planet. Use of ecologically friendly, biodegradable plastic made from renewable resources is one of the problem's promising solutions. The objective of this research is to describe the characteristics of the bio-plastic made from banana peels. In order to create a bioplastic using banana peel powder, a sulphuric acid catalyzed acetylation process was used in the study. The bioplastic produced from this process was then characterized by Fourier Transform Infrared (FT-IR). The FTIR spectra of the product displayed the presence of OH, C-H, C=O and C-O absorption peaks. The results of Chemical resistance test demonstrated that, the produced bioplastic was much closer to or had the same chemical resistance test as traditional plastic, allowing the prepared bioplastic to replace the latter. The new bioplastic also showed some biodegradability and was only slightly affected by acid, salt, and alkali. As a result, it was revealed that, new bioplastics with appreciable material properties could be made from agricultural waste. Hence it may be concluded that bioplastics degrades easily and faster than petroleum based plastics and can be a solution to the long lasted environmental problems caused by petroleum based plastics.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Development and Characterization of Starch Based Bioplatics Using Banana Peels
AU  - Fatima Haliru Wali
AU  - Hannatu Sani Abubakar
AU  - Abubakar Umar Birnin-Yauri
AU  - Sayudi Yahaya Haruna
Y1  - 2023/07/27
PY  - 2023
N1  - https://doi.org/10.11648/j.ajpst.20230902.12
DO  - 10.11648/j.ajpst.20230902.12
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 21
EP  - 25
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20230902.12
AB  - A number of significant issues had expedite owing to the increased use of conventional plastic, including the shortage of raw materials for the production of plastic and the buildup of non-biodegradable plastic debris on the planet. Use of ecologically friendly, biodegradable plastic made from renewable resources is one of the problem's promising solutions. The objective of this research is to describe the characteristics of the bio-plastic made from banana peels. In order to create a bioplastic using banana peel powder, a sulphuric acid catalyzed acetylation process was used in the study. The bioplastic produced from this process was then characterized by Fourier Transform Infrared (FT-IR). The FTIR spectra of the product displayed the presence of OH, C-H, C=O and C-O absorption peaks. The results of Chemical resistance test demonstrated that, the produced bioplastic was much closer to or had the same chemical resistance test as traditional plastic, allowing the prepared bioplastic to replace the latter. The new bioplastic also showed some biodegradability and was only slightly affected by acid, salt, and alkali. As a result, it was revealed that, new bioplastics with appreciable material properties could be made from agricultural waste. Hence it may be concluded that bioplastics degrades easily and faster than petroleum based plastics and can be a solution to the long lasted environmental problems caused by petroleum based plastics.
VL  - 9
IS  - 2
ER  -

Copy | Download