| Peer-Reviewed

Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst

Received: 28 May 2013     Published: 30 June 2013
Views:       Downloads:
Abstract

The aim of this study was to apply experimental design in the optimization of the thia-Michael addition reaction between chalcone derivatives and mercaptans catalyzed by Fluorapatite catalyst (FAP). The central composite design was used to design an experimental program to provide data to model the effects of various factors on reaction yield (Y). The variables chosen were catalyst weight (X1), reaction time (X2) and solvent volume (X3). The mathematical relationship of reaction yield on the three significant independent variables can be approximated by a nonlinear polynomial model. Predicted values were found to be in good agreement with experimental values. The optimum reaction conditions (x1= 350 mg, x2= 30 min and x3= 2 mL) for reaction model (chalcone and thiophenol) obtained by response surface were applied to other substrates. This study has shown that central composite design could efficiently be applied for the modeling of catalytic carbon-sulfur bond formation by FAP catalyst under mild reaction condition with high yield, and it is an economical way of obtaining the maximum amount of information with the fewest number of experiments.

Published in American Journal of Applied Chemistry (Volume 1, Issue 2)
DOI 10.11648/j.ajac.20130102.12
Page(s) 22-27
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Carbon-Sulfur Bond Formation, Fluorapatite, Heterogenous Catalyst, Central Composite Design, Response Surface Methodology

References
[1] G. Yerli, H. Gezegen, M. Ceylan, Iodine-catalyzed addition of 2-mercaptoethanol to chalcone derivatives: Synthesis of the novel β-mercapto carbonyl compounds, Org. Commun., 5, (2012), pp. 70-76.
[2] E. Fujita, Y. Nagao, Tumor inhibitors having potential for interaction with mercapto enzymes and/or coenzymes, Bio. org. Chem., 6, (1977), pp. 287-309.
[3] N. K. Konduru, S. Dey, M. Sajid, M. Owais, N. Ahmed, Synthesis and antibacterial and antifungal evaluation of some chalcone based sulfones and bisulfones, Euro. J. Med. Chem., 59 (2013), pp. 23-30.
[4] B.M. Trost, D.E. Keeley, New Synthetic Methods. Secoalkylative Approach to Grandisol, J. Org. Chem., 40 (1975), pp. 2013-2013.
[5] T. Cohen, A.J. Mura Jr., D.W. Shull, E.R. Fogel, R.J. Ruffner, J.R. Falck, Removal of sulfur groups from molecules by copper(I). Preparation of sulfur-substituted 1,3-dienes for the Diels-Alder reaction, J. Org. Chem., 41 (1976), pp. 3218–3219.
[6] P. Bakuzia, M.L.F. Bakuzis, Oxidative functionalization of the beta-carbon in alpha, beta-unsaturated systems. Preparation of 3-phenylthio enones, acrylates and other vinyl derivatives, J. Org. Chem., 46 (1981), pp. 235–239.
[7] J. P. Cherkauskas, T. Cohen, Carbonyl-protected beta-lithio aldehydes and ketones via reductive lithiation. A general preparative method for remarkably versatile homoenolate equivalents, J. Org. Chem., 57 (1992), pp. 6–8.
[8] M. Zahouily, H. Charki, Y. Abrouki, B. Mounir, B. Bahlaouan, A. Rayadh, S. Sebti, Natural Phosphate Modified with Sodium Nitrate: New Efficient Catalyst for the Construction of a Carbon-Sulfur and Carbon-Nitrogen Bonds, Lett. Org. Chem., 2, (2005), pp. 354-359.
[9] M. Ceylan, M. B. Gürdere, H. Gezegen, Y. Budak, Potassium-tertiary butoxide-assisted Addition of thioglycolic acid to chalcone derivatives under solvent-free conditions, Synt. Commun., 40 (2010), pp. 2598-2606.
[10] J. T. Li, Y. Cui, G. F. Chen, Z. L. Cheng, T. S. Li, Michael Addition Catalyzed by Potassium Hydroxide Under Ultrasound, Synthetic Comm., 33, (2003), pp. 353-359.
[11] H. Hiemstra, H. Wynberg, Addition of aromatic thiols to conjugated cycloalkenones, catalyzed by chiral β-hydroxy amines: A mechanistic study of homogeneous catalytic asymmetric synthesis, J. Am. Chem. Soc., 103 (1981), pp. 417-430.
[12] T. C. Wabnitz, J. B. Spencer, A General, Brønsted Acid-Catalyzed Hetero-Michael Addition of Nitrogen, Oxygen, and Sulfur Nucleophiles, Org. Lett., 12, (2003), pp. 2141–2144.
[13] Y. Riadi, Y. Abrouki, R. Mamouni, M. El Haddad, S. Routier, G. Guillaumet, S. Lazar, New Eco-Friendly Animal Bone Meal Catalysts for Preparation of Chalcones and Aza-Michael Adducts, Chem. Central J., 6, (2012), pp. 1-7.
[14] B. M. Choudary, M. L. Kantam, C. R. V. Reddy, K. K. Rao, F. Figueras, The first example of Michael addition catalysed by modified Mg–Al hydrotalcite, J. Mol. Catal. A. Chem., 146, (1999), pp. 279-284.
[15] U. Sharma, U. Bora, R. C. Boruah, J. S. Sandhu, Alumina-promoted fast solid-phase Michael addition of enamines with conjugated enones under microwave irradiation, Tet. Lett., 43, (2002), pp. 143-145.
[16] Gaurav Sharma, Raj Kumar, Asit K. Chakraborti, A novel environmentally friendly process for carbon–sulfur bond formation catalyzed by montmorillonite clays, J. Mol. Catal. A. Chem., 263, (2007), pp. 143-148.
[17] P. Shinde, V. Mahajan, H. Borate, V. Tillu, R. Bal, A. Chandwadkar, R. Wakharkar, Li–X-type zeolite mediated Michael addition of thiols to cyclic enones and its application in the synthesis of 13-thiaprostaglandins, J. Mol. Catal. A. Chem., 216, (2004), pp. 115-119.
[18] Y. Abrouki, M. Zahouily, A. Rayadh, B. Bahlaouan, S. Sebti, A natural phosphate and doped-catalyzed Michael addition of mercaptans to α,β-unsaturated carbonyl compounds, Tet. Lett., 43, (2002), pp. 8951-8953.
[19] Y. Riadi, R. Mamouni, Y. Abrouki, M. El Haddad, N. Saffaj, S. El Antri, S. Routier, G. Guillaumet, S. Lazar, Animal Bone Meal (ABM): A Novel Natural Catalyst for Thia-Michael Addition, Tet. Lett., 51, (2010), pp. 6715-6717.
[20] M. Zahouily, Y. Abrouki, B.Bahlaouan, A. Rayadh, S. Sebti, Hydroxyapatite: new efficient Catalyst for the Michael addition, Catal. Comm., 4, (2003), pp. 521-524.
[21] S. Sebti, R. Nazih, R. Tahir, L. Salhi, A. Saber, Fluorapatite: new solid catalyst of the Knoevenagel reaction in heterogeneous media without solvent, Appl. Catal. A: Gen., 197 (2000), pp. 187-190.
[22] A. Anouzla, Y. Abrouki, S. Souabi, M. Safi, H. Rhbal, Colour and COD removal of disperse Dye solution by a novel Coagulant: Application of statistical Design for the optimization and Regression analysis, J. Hazard. Mater., 166 (2009), pp. 1302-1306.
Cite This Article
  • APA Style

    Younes Abrouki, Abdelkader Anouzla, Hayat Loukili, Rabiaâ Lotfi, Ahmed Rayadh, et al. (2013). Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst. American Journal of Applied Chemistry, 1(2), 22-27. https://doi.org/10.11648/j.ajac.20130102.12

    Copy | Download

    ACS Style

    Younes Abrouki; Abdelkader Anouzla; Hayat Loukili; Rabiaâ Lotfi; Ahmed Rayadh, et al. Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst. Am. J. Appl. Chem. 2013, 1(2), 22-27. doi: 10.11648/j.ajac.20130102.12

    Copy | Download

    AMA Style

    Younes Abrouki, Abdelkader Anouzla, Hayat Loukili, Rabiaâ Lotfi, Ahmed Rayadh, et al. Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst. Am J Appl Chem. 2013;1(2):22-27. doi: 10.11648/j.ajac.20130102.12

    Copy | Download

  • @article{10.11648/j.ajac.20130102.12,
      author = {Younes Abrouki and Abdelkader Anouzla and Hayat Loukili and Rabiaâ Lotfi and Ahmed Rayadh and My Abdellah Bahlaoui and Saı̈d Sebti and Driss Zakarya and Mohamed Zahouily},
      title = {Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst},
      journal = {American Journal of Applied Chemistry},
      volume = {1},
      number = {2},
      pages = {22-27},
      doi = {10.11648/j.ajac.20130102.12},
      url = {https://doi.org/10.11648/j.ajac.20130102.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajac.20130102.12},
      abstract = {The aim of this study was to apply experimental design in the optimization of the thia-Michael addition reaction between chalcone derivatives and mercaptans catalyzed by Fluorapatite catalyst (FAP). The central composite design was used to design an experimental program to provide data to model the effects of various factors on reaction yield (Y). The variables chosen were catalyst weight (X1), reaction time (X2) and solvent volume (X3). The mathematical relationship of reaction yield on the three significant independent variables can be approximated by a nonlinear polynomial model. Predicted values were found to be in good agreement with experimental values. The optimum reaction conditions (x1= 350 mg, x2= 30 min and x3= 2 mL) for reaction model (chalcone and thiophenol) obtained by response surface were applied to other substrates. This study has shown that central composite design could efficiently be applied for the modeling of catalytic carbon-sulfur bond formation by FAP catalyst under mild reaction condition with high yield, and it is an economical way of obtaining the maximum amount of information with the fewest number of experiments.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Central Composite Experimental Design Applied to the Catalytic Carbon-Sulfur Bond Formation by Fluorapatite Catalyst
    AU  - Younes Abrouki
    AU  - Abdelkader Anouzla
    AU  - Hayat Loukili
    AU  - Rabiaâ Lotfi
    AU  - Ahmed Rayadh
    AU  - My Abdellah Bahlaoui
    AU  - Saı̈d Sebti
    AU  - Driss Zakarya
    AU  - Mohamed Zahouily
    Y1  - 2013/06/30
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ajac.20130102.12
    DO  - 10.11648/j.ajac.20130102.12
    T2  - American Journal of Applied Chemistry
    JF  - American Journal of Applied Chemistry
    JO  - American Journal of Applied Chemistry
    SP  - 22
    EP  - 27
    PB  - Science Publishing Group
    SN  - 2330-8745
    UR  - https://doi.org/10.11648/j.ajac.20130102.12
    AB  - The aim of this study was to apply experimental design in the optimization of the thia-Michael addition reaction between chalcone derivatives and mercaptans catalyzed by Fluorapatite catalyst (FAP). The central composite design was used to design an experimental program to provide data to model the effects of various factors on reaction yield (Y). The variables chosen were catalyst weight (X1), reaction time (X2) and solvent volume (X3). The mathematical relationship of reaction yield on the three significant independent variables can be approximated by a nonlinear polynomial model. Predicted values were found to be in good agreement with experimental values. The optimum reaction conditions (x1= 350 mg, x2= 30 min and x3= 2 mL) for reaction model (chalcone and thiophenol) obtained by response surface were applied to other substrates. This study has shown that central composite design could efficiently be applied for the modeling of catalytic carbon-sulfur bond formation by FAP catalyst under mild reaction condition with high yield, and it is an economical way of obtaining the maximum amount of information with the fewest number of experiments.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Department of Research, Faculty of Science and Technology, University Hassan II, Mohammedia, Morocco

  • Sections