In order to predict the performance parameters of a regenerative melting aluminum furnace new designed based on the regenerative combustion technology, the computational fluid dynamics numerical simulation method was used to study its combustion characteristics. Flow field, temperature field and mass fraction of pollutant NO were numerically simulated for the furnace by using the k-ε turbulence model, Eddy-Dissipation Concept combustion model, P-1 radiation equation, and NOX pollutant model respectively of the ANSYS-Fluent software. The result shows a short circuit of the flue gas appears when the regenerative burner is arranged on the same side furnace wall, at the same time, the distribution of the temperature field is uneven. The researcher carried out structural transformation of the aluminum melting furnace. Compared with the furnace before modification, the furnace that the regenerative burners installed in the middle of both sides wall ensures temperature field distribution more uniform and reduction of the NO emissions at furnace outlet.
| Published in | Advances in Applied Sciences (Volume 6, Issue 4) |
| DOI | 10.11648/j.aas.20210604.19 |
| Page(s) | 132-141 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Regenerative Aluminum Melting Furnace, Numerical Simulation, Structural Optimization
| [1] | Wang Zibing, Li Shi Cheng, Xing Hongwei, et al. Design and a application of flue gas backflushing system for regenerative heating furnace. China Metallurgy, vol. 29, no. 11, pp. 82-86, 2019. |
| [2] | Experiments on pressure distribution inside regenerator of reheating furnace for rolling process. China Metallurgy, vol. 29, no. 9, pp. 29-32, 2019. |
| [3] | Bu Huancun. Application of Heat Storage High Temperature Air Combustion Technology. Journal of Iron and Steel Research, vol. 17, no. 5, pp. 1-6, 2005. |
| [4] | Liu Zhiqiang, Han Zheng, Wang Zhenhe. Structural Optimized for the Regenerative Burners of Little Heating Furnace. Industrial Furnace, vol. 26, no. 1, pp. 36-38, 2004. |
| [5] | Lv Yiqing, Sun We, Hou Weijun, etc. Study and Design of Structure Optimization in Regenerative Burner of Reheating Furnace. Industrial Furnace, vol. 27, no. 4, pp. 9-16, 2005. |
| [6] | Cadavid F, Herrera B, Amell A. Numerical Simulation of the Flow Streams Behavior in a Self-regenerative Crucible Furnace. Applied Thermal Engineering, vol. 30, no. 8, pp. 826-832, 2010. |
| [7] | Danon B, Cho E S, Jong W D, et al. Numerical Investigation of Burner Positioning Effects in a Multi-burner Flameless Combustion Furnace. Applied Thermal Engineering, vol. 31, no. 17, pp. 3885-3896, 2011. |
| [8] | Xiao Dan, Liu Hongxun, Yang Tao. Numerical Simulation and Parameters Optimization of Combustion Process of Air Single-Regenerative Burner. Industrial Furnace, vol. 34, no. 6, pp. 49-51+55, 2012. |
| [9] | Rao Wentao, Dun Jun, Zhang Hesheng, etc. Numerical Simulation Optimizing Research of Regenerative Burner Structure. Industrial Furnace, vol. 24, no. 2, pp. 5-8, 2002. |
APA Style
Tao Li, Aiqin Li, Jiecheng Yu, Zhiming Guo, Jingyu Yan, et al. (2021). Research on Structural Optimization of Regenerative Melting Aluminum Furnace. Advances in Applied Sciences, 6(4), 132-141. https://doi.org/10.11648/j.aas.20210604.19
ACS Style
Tao Li; Aiqin Li; Jiecheng Yu; Zhiming Guo; Jingyu Yan, et al. Research on Structural Optimization of Regenerative Melting Aluminum Furnace. Adv. Appl. Sci. 2021, 6(4), 132-141. doi: 10.11648/j.aas.20210604.19
AMA Style
Tao Li, Aiqin Li, Jiecheng Yu, Zhiming Guo, Jingyu Yan, et al. Research on Structural Optimization of Regenerative Melting Aluminum Furnace. Adv Appl Sci. 2021;6(4):132-141. doi: 10.11648/j.aas.20210604.19
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.aas.20210604.19,
author = {Tao Li and Aiqin Li and Jiecheng Yu and Zhiming Guo and Jingyu Yan and Ningjing Yang and Yunjie Wu},
title = {Research on Structural Optimization of Regenerative Melting Aluminum Furnace},
journal = {Advances in Applied Sciences},
volume = {6},
number = {4},
pages = {132-141},
doi = {10.11648/j.aas.20210604.19},
url = {https://doi.org/10.11648/j.aas.20210604.19},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aas.20210604.19},
abstract = {In order to predict the performance parameters of a regenerative melting aluminum furnace new designed based on the regenerative combustion technology, the computational fluid dynamics numerical simulation method was used to study its combustion characteristics. Flow field, temperature field and mass fraction of pollutant NO were numerically simulated for the furnace by using the k-ε turbulence model, Eddy-Dissipation Concept combustion model, P-1 radiation equation, and NOX pollutant model respectively of the ANSYS-Fluent software. The result shows a short circuit of the flue gas appears when the regenerative burner is arranged on the same side furnace wall, at the same time, the distribution of the temperature field is uneven. The researcher carried out structural transformation of the aluminum melting furnace. Compared with the furnace before modification, the furnace that the regenerative burners installed in the middle of both sides wall ensures temperature field distribution more uniform and reduction of the NO emissions at furnace outlet.},
year = {2021}
}
TY - JOUR T1 - Research on Structural Optimization of Regenerative Melting Aluminum Furnace AU - Tao Li AU - Aiqin Li AU - Jiecheng Yu AU - Zhiming Guo AU - Jingyu Yan AU - Ningjing Yang AU - Yunjie Wu Y1 - 2021/12/31 PY - 2021 N1 - https://doi.org/10.11648/j.aas.20210604.19 DO - 10.11648/j.aas.20210604.19 T2 - Advances in Applied Sciences JF - Advances in Applied Sciences JO - Advances in Applied Sciences SP - 132 EP - 141 PB - Science Publishing Group SN - 2575-1514 UR - https://doi.org/10.11648/j.aas.20210604.19 AB - In order to predict the performance parameters of a regenerative melting aluminum furnace new designed based on the regenerative combustion technology, the computational fluid dynamics numerical simulation method was used to study its combustion characteristics. Flow field, temperature field and mass fraction of pollutant NO were numerically simulated for the furnace by using the k-ε turbulence model, Eddy-Dissipation Concept combustion model, P-1 radiation equation, and NOX pollutant model respectively of the ANSYS-Fluent software. The result shows a short circuit of the flue gas appears when the regenerative burner is arranged on the same side furnace wall, at the same time, the distribution of the temperature field is uneven. The researcher carried out structural transformation of the aluminum melting furnace. Compared with the furnace before modification, the furnace that the regenerative burners installed in the middle of both sides wall ensures temperature field distribution more uniform and reduction of the NO emissions at furnace outlet. VL - 6 IS - 4 ER -
Information
Email: