Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures

Peng Jianyun; Wei Junhui; Du Wenbo; Zhang Chuang; Zeng Nu; Liu Ming; Rao Dong

doi:doi:10.11648/j.aas.20210604.17

| Peer-Reviewed

Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures

Peng Jianyun, Wei Junhui, Du Wenbo, Zhang Chuang, Zeng Nu, Liu Ming, Rao Dong

Published in Advances in Applied Sciences (Volume 6, Issue 4)

Received: 12 February 2021 Accepted: 23 February 2021 Published: 11 November 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Tensile and compression tests on pure PTFE, 10% carbon fiber PTFE and 20% carbon fiber PTFE were carried out on the universal material testing machine at three temperatures of 20°C, 60°C and 90°C, accepted the tensile elongation and tensile strength of this material at different temperatures. Finite element analysis is performed on pan plug seals made of three materials at different temperatures and 105 MPa. The simulation results show that when the maximum Mises stress of the outer lip of the three materials increases to a certain amount, an inflection point will appear, and the maximum Mises stress increase before the inflection point is large after the inflection point, the Mises stress increment gradually decreases. The higher the carbon fiber content, the greater the maximum Mises stress value of the lip; as the temperature increases, the seals of the three materials are less prone to tensile failure; the material with less carbon fiber content, the less stretched. When the valve stem moves up and down, the stress value of the inner lip changes more than the stress value of the outer lip; the upward stroke is conducive to the realization of the seal; the part near the end of the inner lip is more affected by the movement of the valve stem. This article provides a certain basis for the selection of pan plug seals.

Published in	Advances in Applied Sciences (Volume 6, Issue 4)
DOI	10.11648/j.aas.20210604.17
Page(s)	116-124
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Carbon Fiber PTFE, Tension and Compression Test, Pan Plug Seal

References

[1]	Wu Xingbin, Li Dayong, Tang Weiqin. Research on mechanical properties and finite element analysis of polytetrafluoroethylene composite materials [J]. Engineering Plastics Application, 2014, 42 (02): 74-77.
[2]	Li Dong. Research and application of polytetrafluoroethylene materials in the petroleum industry [J]. Zhejiang Chemical Industry, 2019, 50 (02): 10-15+37.
[3]	Chai Jing. Modification of PTFE diaphragm and its application in electrochemical synthesis of N2O5 [D]. Tianjin University, 2010.
[4]	Song Wei. Study on the properties of aramid fiber filled and modified reinforced polytetrafluoroethylene composite materials [D]. Jiangsu University, 2009.
[5]	Zhang Zhe. Experimental study on uniaxial and multiaxial cyclic deformation of polytetrafluoroethylene at room temperature [D]. Tianjin University, 2007.
[6]	Ding Meiping. Study on modification and performance of polytetrafluoroethylene [D]. Northwestern Polytechnical University, 2006.
[7]	Zhao Ning. Development of a high-speed rotating experimental machine [D]. Nanjing University of Science and Technology, 2008.
[8]	Wei Huasun. Surface functionalization of fluoropolymer film and its surface electroless plating application [D]. Materials Physics and Chemistry, Nanchang University, 2006.
[9]	Zang Ping. Dynamic and static sealing performance analysis and development of ultra-high pressure throttle valve seals [D]. Southwest Petroleum University, 2015.
[10]	Feng Xiaoyin. Research on the properties of high temperature resistant nitrile rubber [D]. Qingdao University of Science and Technology, 2017.
[11]	Wang Zhanhui, Ma Xiangrong, Fan Xiaoyong, Gao Yong. Research on the mechanical properties of carbon fiber filled polytetrafluoroethylene composites [J]. Contemporary Chemical Industry, 2018, 47 (11): 2255-2258.
[12]	Li Xin, Feng Haisheng. Simulation of reciprocating piston rod seal ring wear [J]. Journal of Hebei Normal University of Science and Technology, 2017, 31 (1): 64-68.
[13]	Wang Xiaogang. Research on carbon fiber/glass fiber reinforced PPESK composites [D]. Changchun University of Technology, 2016.
[14]	Yan Yongming. Research on the superelastic constitutive model of rubber materials in low temperature environment [D]. Yanshan University, 2016.
[15]	Shi Yanling, Wang Wendong. Performance and application of carbon fiber filled polytetrafluoroethylene [J]. Organic Fluorine Industry, 2005 (03): 23-25.
[16]	Hou Genliang, Qiao Xiaoping, Su Xunjia, Wang Yanbin, Mei Zhenxing, Xu Kewei. Research on the tribological properties of polytetrafluoroethylene coatings under high load conditions [J]. Lubrication and Sealing, 2007 (06): 84-86.
[17]	Xie Gang, Huang Chengya. Research on modification technology of polytetrafluoroethylene [J]. Aging and Application of Synthetic Materials, 2007 (01): 32-39.
[18]	Hui Jia. Research on the influence of temperature on the properties of polytetrafluoroethylene materials [J]. Pyrotechnics, 2006 (01): 46-48.

Cite This Article

Plain Text BibTeX RIS

APA Style

Peng Jianyun, Wei Junhui, Du Wenbo, Zhang Chuang, Zeng Nu, et al. (2021). Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Advances in Applied Sciences, 6(4), 116-124. https://doi.org/10.11648/j.aas.20210604.17

Copy | Download

ACS Style

Peng Jianyun; Wei Junhui; Du Wenbo; Zhang Chuang; Zeng Nu, et al. Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Adv. Appl. Sci. 2021, 6(4), 116-124. doi: 10.11648/j.aas.20210604.17

Copy | Download

AMA Style

Peng Jianyun, Wei Junhui, Du Wenbo, Zhang Chuang, Zeng Nu, et al. Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Adv Appl Sci. 2021;6(4):116-124. doi: 10.11648/j.aas.20210604.17

Copy | Download

@article{10.11648/j.aas.20210604.17,
  author = {Peng Jianyun and Wei Junhui and Du Wenbo and Zhang Chuang and Zeng Nu and Liu Ming and Rao Dong},
  title = {Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures},
  journal = {Advances in Applied Sciences},
  volume = {6},
  number = {4},
  pages = {116-124},
  doi = {10.11648/j.aas.20210604.17},
  url = {https://doi.org/10.11648/j.aas.20210604.17},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aas.20210604.17},
  abstract = {Tensile and compression tests on pure PTFE, 10% carbon fiber PTFE and 20% carbon fiber PTFE were carried out on the universal material testing machine at three temperatures of 20°C, 60°C and 90°C, accepted the tensile elongation and tensile strength of this material at different temperatures. Finite element analysis is performed on pan plug seals made of three materials at different temperatures and 105 MPa. The simulation results show that when the maximum Mises stress of the outer lip of the three materials increases to a certain amount, an inflection point will appear, and the maximum Mises stress increase before the inflection point is large after the inflection point, the Mises stress increment gradually decreases. The higher the carbon fiber content, the greater the maximum Mises stress value of the lip; as the temperature increases, the seals of the three materials are less prone to tensile failure; the material with less carbon fiber content, the less stretched. When the valve stem moves up and down, the stress value of the inner lip changes more than the stress value of the outer lip; the upward stroke is conducive to the realization of the seal; the part near the end of the inner lip is more affected by the movement of the valve stem. This article provides a certain basis for the selection of pan plug seals.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures
AU  - Peng Jianyun
AU  - Wei Junhui
AU  - Du Wenbo
AU  - Zhang Chuang
AU  - Zeng Nu
AU  - Liu Ming
AU  - Rao Dong
Y1  - 2021/11/11
PY  - 2021
N1  - https://doi.org/10.11648/j.aas.20210604.17
DO  - 10.11648/j.aas.20210604.17
T2  - Advances in Applied Sciences
JF  - Advances in Applied Sciences
JO  - Advances in Applied Sciences
SP  - 116
EP  - 124
PB  - Science Publishing Group
SN  - 2575-1514
UR  - https://doi.org/10.11648/j.aas.20210604.17
AB  - Tensile and compression tests on pure PTFE, 10% carbon fiber PTFE and 20% carbon fiber PTFE were carried out on the universal material testing machine at three temperatures of 20°C, 60°C and 90°C, accepted the tensile elongation and tensile strength of this material at different temperatures. Finite element analysis is performed on pan plug seals made of three materials at different temperatures and 105 MPa. The simulation results show that when the maximum Mises stress of the outer lip of the three materials increases to a certain amount, an inflection point will appear, and the maximum Mises stress increase before the inflection point is large after the inflection point, the Mises stress increment gradually decreases. The higher the carbon fiber content, the greater the maximum Mises stress value of the lip; as the temperature increases, the seals of the three materials are less prone to tensile failure; the material with less carbon fiber content, the less stretched. When the valve stem moves up and down, the stress value of the inner lip changes more than the stress value of the outer lip; the upward stroke is conducive to the realization of the seal; the part near the end of the inner lip is more affected by the movement of the valve stem. This article provides a certain basis for the selection of pan plug seals.
VL  - 6
IS  - 4
ER  -

Copy | Download

Author Information

Peng Jianyun

Oil and Gas Engineering Research Institute of China Petroleum Tarim Oilfield Company, Korla, China
Wei Junhui

Oil and Gas Engineering Research Institute of China Petroleum Tarim Oilfield Company, Korla, China
Du Wenbo

CNPC BOMCO Drilling & Production Equipment Co., Ltd. Deyang, China
Zhang Chuang

CNPC BOMCO Drilling & Production Equipment Co., Ltd. Deyang, China
Zeng Nu

Oil and Gas Engineering Research Institute of China Petroleum Tarim Oilfield Company, Korla, China
Liu Ming

CNPC BOMCO Drilling & Production Equipment Co., Ltd. Deyang, China
Rao Dong

CNPC BOMCO Drilling & Production Equipment Co., Ltd. Deyang, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Peng Jianyun, Wei Junhui, Du Wenbo, Zhang Chuang, Zeng Nu, et al. (2021). Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Advances in Applied Sciences, 6(4), 116-124. https://doi.org/10.11648/j.aas.20210604.17

Copy | Download

ACS Style

Peng Jianyun; Wei Junhui; Du Wenbo; Zhang Chuang; Zeng Nu, et al. Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Adv. Appl. Sci. 2021, 6(4), 116-124. doi: 10.11648/j.aas.20210604.17

Copy | Download

AMA Style

Peng Jianyun, Wei Junhui, Du Wenbo, Zhang Chuang, Zeng Nu, et al. Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures. Adv Appl Sci. 2021;6(4):116-124. doi: 10.11648/j.aas.20210604.17

Copy | Download

@article{10.11648/j.aas.20210604.17,
  author = {Peng Jianyun and Wei Junhui and Du Wenbo and Zhang Chuang and Zeng Nu and Liu Ming and Rao Dong},
  title = {Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures},
  journal = {Advances in Applied Sciences},
  volume = {6},
  number = {4},
  pages = {116-124},
  doi = {10.11648/j.aas.20210604.17},
  url = {https://doi.org/10.11648/j.aas.20210604.17},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.aas.20210604.17},
  abstract = {Tensile and compression tests on pure PTFE, 10% carbon fiber PTFE and 20% carbon fiber PTFE were carried out on the universal material testing machine at three temperatures of 20°C, 60°C and 90°C, accepted the tensile elongation and tensile strength of this material at different temperatures. Finite element analysis is performed on pan plug seals made of three materials at different temperatures and 105 MPa. The simulation results show that when the maximum Mises stress of the outer lip of the three materials increases to a certain amount, an inflection point will appear, and the maximum Mises stress increase before the inflection point is large after the inflection point, the Mises stress increment gradually decreases. The higher the carbon fiber content, the greater the maximum Mises stress value of the lip; as the temperature increases, the seals of the three materials are less prone to tensile failure; the material with less carbon fiber content, the less stretched. When the valve stem moves up and down, the stress value of the inner lip changes more than the stress value of the outer lip; the upward stroke is conducive to the realization of the seal; the part near the end of the inner lip is more affected by the movement of the valve stem. This article provides a certain basis for the selection of pan plug seals.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Effects of Modified Polytetrafluoroethylene (PTFE) on the Performance of Pan-plug Seal at Different Temperatures
AU  - Peng Jianyun
AU  - Wei Junhui
AU  - Du Wenbo
AU  - Zhang Chuang
AU  - Zeng Nu
AU  - Liu Ming
AU  - Rao Dong
Y1  - 2021/11/11
PY  - 2021
N1  - https://doi.org/10.11648/j.aas.20210604.17
DO  - 10.11648/j.aas.20210604.17
T2  - Advances in Applied Sciences
JF  - Advances in Applied Sciences
JO  - Advances in Applied Sciences
SP  - 116
EP  - 124
PB  - Science Publishing Group
SN  - 2575-1514
UR  - https://doi.org/10.11648/j.aas.20210604.17
AB  - Tensile and compression tests on pure PTFE, 10% carbon fiber PTFE and 20% carbon fiber PTFE were carried out on the universal material testing machine at three temperatures of 20°C, 60°C and 90°C, accepted the tensile elongation and tensile strength of this material at different temperatures. Finite element analysis is performed on pan plug seals made of three materials at different temperatures and 105 MPa. The simulation results show that when the maximum Mises stress of the outer lip of the three materials increases to a certain amount, an inflection point will appear, and the maximum Mises stress increase before the inflection point is large after the inflection point, the Mises stress increment gradually decreases. The higher the carbon fiber content, the greater the maximum Mises stress value of the lip; as the temperature increases, the seals of the three materials are less prone to tensile failure; the material with less carbon fiber content, the less stretched. When the valve stem moves up and down, the stress value of the inner lip changes more than the stress value of the outer lip; the upward stroke is conducive to the realization of the seal; the part near the end of the inner lip is more affected by the movement of the valve stem. This article provides a certain basis for the selection of pan plug seals.
VL  - 6
IS  - 4
ER  -

Copy | Download