| Peer-Reviewed

Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears

Received: 21 April 2019     Accepted: 2 June 2019     Published: 13 June 2019
Views:       Downloads:
Abstract

In this paper, two types of point contact and line contact of spiral cylindrical gear transmission pair are studied and analyzed. The influences of the axis parallelism error and the center distance error on the contact area are analyzed. The numerical example shows that the line-contact transmission pair has larger contact area if the installation error is not considered. By using MATLAB software and simulation example, the influence of axis parallelism on contact area and meshing performance of spiral cylindrical gears under different error conditions are obtained.

Published in International Journal of Science and Qualitative Analysis (Volume 5, Issue 1)
DOI 10.11648/j.ijsqa.20190501.11
Page(s) 1-5
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Circular-Arc-Tooth-Trace Cylindrical Gear, Parallelism Error, Meshing Performance

References
[1] Liao Yinghua, Liu Gaojun, Sun Xiangguo. Development of an intelligent CAD system for involute cylindrical gear cutting tools [J]. Applied Mechanics and Materials, Mechatronics and Applied Mechanics III, 2014, 532: 249-252.
[2] Dai Fengyan, Shi Zhaoyao, Lin Jiachun. Development and research on gear noise test system [J]. Advanced Materials Research, Engineering Solutions for Manufacturing Processes IV, 2014, 889-890: 718-721.
[3] T. Masuyama et al. Bending strength simulation of asymmetric involute tooth gears [J]. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2015, 9 (5): 15-00485.
[4] Li Haixiang. Basic theory and experimental research on involute arc gear transmission [D]. Chongqing University, 2012.
[5] Sun Xiaowei. Characteristics and processing methods of spiral gears [J]. Mechanical Engineer, 1999 (8): 22-22.
[6] Song Aiping, Wu Weiwei, Gao Shang, Gao Wenjie. Ideal Geometric Parameters of Arc-toothed Cylindrical Gear and Its Processing Method [J]. Journal of Shanghai Jiaotong University, 2010. 44 (12). 1735-1740.
[7] F. L. Litvin. Gear Geometry and Applied Theory [M]. Shanghai: Shanghai Science and Technology Press, 2008.
[8] R. T. Tseng, C. B. Tsay. Contact Characteristics of Cylindrical Gears with Curvilinear Shaped Teeth [J]. Mechanism and Machine Theory, 2004, 39: 905-919.
[9] FL Litvin et al. Topology of Modified Surfaces of Involute Helical Gears with Line Contact Developed for Improvement of Bearing Contact, Reduction of Transmission Errors, and Stress Analysis [J]. Mathematical and Computer Modelling, 2005, 42: 1063-1078.
[10] Tang Jinyuan, Chen Xingming, Luo Caiwang. Contact Analysis of Cylindrical Gear Considering Tooth Shape Modification and Installation Error [J]. Journal of Central South University: Natural Science, 2012, 43 (5).
[11] Jijun Sun, Li Hou, Contact Strength Analysis of Circular-Arc-Tooth-Trace-Cylindrical Gear [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2016, 38 (3): 999-1005.
Cite This Article
  • APA Style

    Tang Rui, Ling Yun. (2019). Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears. International Journal of Science and Qualitative Analysis, 5(1), 1-5. https://doi.org/10.11648/j.ijsqa.20190501.11

    Copy | Download

    ACS Style

    Tang Rui; Ling Yun. Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears. Int. J. Sci. Qual. Anal. 2019, 5(1), 1-5. doi: 10.11648/j.ijsqa.20190501.11

    Copy | Download

    AMA Style

    Tang Rui, Ling Yun. Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears. Int J Sci Qual Anal. 2019;5(1):1-5. doi: 10.11648/j.ijsqa.20190501.11

    Copy | Download

  • @article{10.11648/j.ijsqa.20190501.11,
      author = {Tang Rui and Ling Yun},
      title = {Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears},
      journal = {International Journal of Science and Qualitative Analysis},
      volume = {5},
      number = {1},
      pages = {1-5},
      doi = {10.11648/j.ijsqa.20190501.11},
      url = {https://doi.org/10.11648/j.ijsqa.20190501.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijsqa.20190501.11},
      abstract = {In this paper, two types of point contact and line contact of spiral cylindrical gear transmission pair are studied and analyzed. The influences of the axis parallelism error and the center distance error on the contact area are analyzed. The numerical example shows that the line-contact transmission pair has larger contact area if the installation error is not considered. By using MATLAB software and simulation example, the influence of axis parallelism on contact area and meshing performance of spiral cylindrical gears under different error conditions are obtained.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Analysis of the Influence of Parallelism Error on the Meshing Performance of Circular-Arc-Tooth-Trace Cylindrical Gears
    AU  - Tang Rui
    AU  - Ling Yun
    Y1  - 2019/06/13
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ijsqa.20190501.11
    DO  - 10.11648/j.ijsqa.20190501.11
    T2  - International Journal of Science and Qualitative Analysis
    JF  - International Journal of Science and Qualitative Analysis
    JO  - International Journal of Science and Qualitative Analysis
    SP  - 1
    EP  - 5
    PB  - Science Publishing Group
    SN  - 2469-8164
    UR  - https://doi.org/10.11648/j.ijsqa.20190501.11
    AB  - In this paper, two types of point contact and line contact of spiral cylindrical gear transmission pair are studied and analyzed. The influences of the axis parallelism error and the center distance error on the contact area are analyzed. The numerical example shows that the line-contact transmission pair has larger contact area if the installation error is not considered. By using MATLAB software and simulation example, the influence of axis parallelism on contact area and meshing performance of spiral cylindrical gears under different error conditions are obtained.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China

  • Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China

  • Sections