Research on Ceramic/Steel Connection Using the Composite Brazing Method

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li

doi:doi:10.11648/j.ijmsa.20231203.11

| Peer-Reviewed

Research on Ceramic/Steel Connection Using the Composite Brazing Method

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li

Published in International Journal of Materials Science and Applications (Volume 12, Issue 3)

Received: 17 July 2023 Accepted: 8 August 2023 Published: 22 August 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Ceramic/metal connectors are widely used in aerospace, microelectronics, precision instruments, fuel cells and other fields. Ceramics' poor machinability, low ductility and impact toughness, high brittleness, and other defects severely limit their application in the wear-resistant materials industry. Due to the large difference between the coefficient of thermal expansion of ceramics and metal, the residual thermal stresses generated during the connection process will destroy the integrity of the joint, thus increasing the difficulty of connecting ceramics and metal. The composite brazing method can effectively eliminate the residual thermal stress, which is one of the ideal methods to solve the problem of ceramic-metal connection. Composite brazing will be able to regulate the thermophysical properties of the material, thus greatly reducing the damage of residual thermal stresses on the joint, and then improve the strength of the ceramic/metal joint, the method not only increases the wettability of the brazing material on the ceramic side, which is irreplaceable in improving the bonding of the joint, but also eliminates the residual thermal stresses and ensures the integrity of the joint. This paper summarizes the current research status of ceramic/steel composite brazed joints in recent years, and investigates the mechanical properties and microinterfacial structure composition of the joints.

Published in	International Journal of Materials Science and Applications (Volume 12, Issue 3)
DOI	10.11648/j.ijmsa.20231203.11
Page(s)	36-40
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Ceramic/Metal, Brazing, Mechanical Properties, Microinterfacial Structure

References

[1]	Zhang Y, Chen Y K, Yu D S, et al. A review paper on effect of the welding process of ceramics and metals [J]. Journal of Materials Research and Technology, 2020, 9 (6): 16214-16236.
[2]	Zhang Y, Chen Y K, Zhou J P, et al. Laser welding-brazing of alumina to 304 stainless steel with an Ag-based filler material [J]. Metallurgical Research & Technology, 2021, 118 (1): 104-109.
[3]	Pan L, Gu J, Zou W, et al. Brazing joining of Ti₃AlC₂ ceramic and 40Cr steel based on Ag-Cu-Ti filler metal [J]. Journal of Materials Processing Technology, 2018, 251: 181-187.
[4]	Liu G, Zhang X, Yang J, et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior [J]. Journal of Advanced Ceramics, 2019, 8: 19-38.
[5]	Liu G, Qiao G, Wang H, et al. Bonding mechanisms and shear properties of alumina ceramic/stainless steel brazed joint [J]. Journal of materials engineering and performance, 2011, 20 (9): 1563-1568.
[6]	A. Passerone, M. L. Muolo. Joining Technology in Metal-Ceramic Systems [J]. Materials and Manufacturing Processes, 2000, 15 (5): 631-648.
[7]	I. W. Donald, P. M. Mallinson, B. L. Metcalfe, et al. Recent developments in the preparation, characterization and applications of glass- and glass-ceramic-to-metal seals and coatings [J]. Journal of Materials Science, 2011, 46 (7): 1975-2000.
[8]	Zhang J, He Y M, Sun Y, et al. Microstructure evolution of Si₃N₄/Si₃N₄ joint brazed with Ag-Cu-Ti+ SiCp composite filler [J]. Ceramics International, 2010, 36 (4): 1397-1404.
[9]	He H, Du X, Huang X, et al. The effect of Mo particles addition in Ag-Cu-Ti filler alloy on Ti (C, N)-based cermet/45 steel-brazed joints [J]. Journal of Materials Engineering and Performance, 2018, 27: 2438-2445.
[10]	He Y M, Zhang J, Sun Y, et al. Microstructure and mechanical properties of the Si₃N₄/42CrMo steel joints brazed with Ag–Cu–Ti+ Mo composite filler [J]. Journal of the European Ceramic Society, 2010, 30 (15): 3245-3251.
[11]	Blugan G, Kuebler J, Bissig V, et al. Brazing of silicon nitride ceramic composite to steel using SiC-particle-reinforced active brazing alloy [J]. Ceramics International, 2007, 33 (6): 1033-1039.
[12]	Yang Z W, Yang J H, Han Y J, et al. Microstructure and mechanical properties of 17-4áPH stainless steel and Al₂O₃ ceramic joints brazed with graphene reinforced Ag-Cu-Ti brazing alloy [J]. Vacuum, 2020, 181: 109604.
[13]	X. P. Xu, Q. M. Liu, C. Z. Xia, et al. Microstructure and properties of Si₃N₄ ceramics and 304 stainless steel brazed joint with Cu/Ag-Cu/Ti laminated filler metal [J]. High Temperature Materials and Processes, 2018, 37 (6): 597-602.
[14]	Aiping Xian, Zhongyao Si. Interlayer design for joining pressureless sintered sialon ceramic and 40Cr steel brazing with Ag₅₇Cu₃₈Ti₅ filler metal [J]. Journal of materials science, 1992, 27 (6): 1560-1566.
[15]	Zhihong Zhong, Tatsuya Hinoki, Akira Kohyama. Joining of Silicon Carbide to Ferritic Stainless Steel Using a W-Pd-Ni Interlayer for High-Temperature Applications [J]. International Journal of Applied Ceramic Technology, 2010, 7 (3): 338-347.
[16]	Zhenwen Yang, Jiamei Lin, Ying Wang, et al. Characterization of microstructure and mechanical properties of Al₂O₃/TiAl joints vacuum-brazed with Ag-Cu-Ti+ W composite filler [J]. Vacuum, 2017, 143: 294-302.
[17]	Y. X. Zhao, M. R. Wan, J. Cao, et al. Brazing TC4 alloy to Si₃N₄ ceramic using nano-Si₃N₄ reinforced AgCu composite filler [J]. Materials & Design, 2015, 76: 40-46.
[18]	Minxuan Yang. Study on microstructure and properties of in-situ TiB whisker reinforced Al₂O₃/TC4 brazed joints [D]. Harbin Institute of Technology, 2012. (in Chinese).
[19]	Minxuan Yang, Tiesong Lin, Peng He, et al. In situ synthesis of TiB whisker reinforcements in the joints of Al₂O₃/TC4 during brazing [J]. Materials Science and Engineering: A, 2011, 528 (9): 3520-3525.
[20]	Bing Cui, Jihua Huang, Jinhui Xiong, et al. Reaction-composite brazing of carbon fiber reinforced SiC composite and TC4 alloy using Ag-Cu-Ti-(Ti+ C) mixed powder [J]. Materials Science and Engineering: A, 2013, 562: 203-210.

Cite This Article

Plain Text BibTeX RIS

APA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Ceramic/Steel Connection Using the Composite Brazing Method. International Journal of Materials Science and Applications, 12(3), 36-40. https://doi.org/10.11648/j.ijmsa.20231203.11

Copy | Download

ACS Style

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Ceramic/Steel Connection Using the Composite Brazing Method. Int. J. Mater. Sci. Appl. 2023, 12(3), 36-40. doi: 10.11648/j.ijmsa.20231203.11

Copy | Download

AMA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Ceramic/Steel Connection Using the Composite Brazing Method. Int J Mater Sci Appl. 2023;12(3):36-40. doi: 10.11648/j.ijmsa.20231203.11

Copy | Download

@article{10.11648/j.ijmsa.20231203.11,
  author = {Deshui Yu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Ceramic/Steel Connection Using the Composite Brazing Method},
  journal = {International Journal of Materials Science and Applications},
  volume = {12},
  number = {3},
  pages = {36-40},
  doi = {10.11648/j.ijmsa.20231203.11},
  url = {https://doi.org/10.11648/j.ijmsa.20231203.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20231203.11},
  abstract = {Ceramic/metal connectors are widely used in aerospace, microelectronics, precision instruments, fuel cells and other fields. Ceramics' poor machinability, low ductility and impact toughness, high brittleness, and other defects severely limit their application in the wear-resistant materials industry. Due to the large difference between the coefficient of thermal expansion of ceramics and metal, the residual thermal stresses generated during the connection process will destroy the integrity of the joint, thus increasing the difficulty of connecting ceramics and metal. The composite brazing method can effectively eliminate the residual thermal stress, which is one of the ideal methods to solve the problem of ceramic-metal connection. Composite brazing will be able to regulate the thermophysical properties of the material, thus greatly reducing the damage of residual thermal stresses on the joint, and then improve the strength of the ceramic/metal joint, the method not only increases the wettability of the brazing material on the ceramic side, which is irreplaceable in improving the bonding of the joint, but also eliminates the residual thermal stresses and ensures the integrity of the joint. This paper summarizes the current research status of ceramic/steel composite brazed joints in recent years, and investigates the mechanical properties and microinterfacial structure composition of the joints.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Ceramic/Steel Connection Using the Composite Brazing Method
AU  - Deshui Yu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ijmsa.20231203.11
DO  - 10.11648/j.ijmsa.20231203.11
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 36
EP  - 40
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20231203.11
AB  - Ceramic/metal connectors are widely used in aerospace, microelectronics, precision instruments, fuel cells and other fields. Ceramics' poor machinability, low ductility and impact toughness, high brittleness, and other defects severely limit their application in the wear-resistant materials industry. Due to the large difference between the coefficient of thermal expansion of ceramics and metal, the residual thermal stresses generated during the connection process will destroy the integrity of the joint, thus increasing the difficulty of connecting ceramics and metal. The composite brazing method can effectively eliminate the residual thermal stress, which is one of the ideal methods to solve the problem of ceramic-metal connection. Composite brazing will be able to regulate the thermophysical properties of the material, thus greatly reducing the damage of residual thermal stresses on the joint, and then improve the strength of the ceramic/metal joint, the method not only increases the wettability of the brazing material on the ceramic side, which is irreplaceable in improving the bonding of the joint, but also eliminates the residual thermal stresses and ensures the integrity of the joint. This paper summarizes the current research status of ceramic/steel composite brazed joints in recent years, and investigates the mechanical properties and microinterfacial structure composition of the joints.
VL  - 12
IS  - 3
ER  -

Copy | Download

Author Information

Deshui Yu

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Yan Zhang

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Jianping Zhou

School of Mechanical Engineering, Xinjiang University, Wulumuqi, China
Daqian Sun

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China
Hongmei Li

Key Laboratory of Automobile Materials, School of Materials Science and Engineering, Jilin University, Changchun, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. (2023). Research on Ceramic/Steel Connection Using the Composite Brazing Method. International Journal of Materials Science and Applications, 12(3), 36-40. https://doi.org/10.11648/j.ijmsa.20231203.11

Copy | Download

ACS Style

Deshui Yu; Yan Zhang; Jianping Zhou; Daqian Sun; Hongmei Li. Research on Ceramic/Steel Connection Using the Composite Brazing Method. Int. J. Mater. Sci. Appl. 2023, 12(3), 36-40. doi: 10.11648/j.ijmsa.20231203.11

Copy | Download

AMA Style

Deshui Yu, Yan Zhang, Jianping Zhou, Daqian Sun, Hongmei Li. Research on Ceramic/Steel Connection Using the Composite Brazing Method. Int J Mater Sci Appl. 2023;12(3):36-40. doi: 10.11648/j.ijmsa.20231203.11

Copy | Download

@article{10.11648/j.ijmsa.20231203.11,
  author = {Deshui Yu and Yan Zhang and Jianping Zhou and Daqian Sun and Hongmei Li},
  title = {Research on Ceramic/Steel Connection Using the Composite Brazing Method},
  journal = {International Journal of Materials Science and Applications},
  volume = {12},
  number = {3},
  pages = {36-40},
  doi = {10.11648/j.ijmsa.20231203.11},
  url = {https://doi.org/10.11648/j.ijmsa.20231203.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20231203.11},
  abstract = {Ceramic/metal connectors are widely used in aerospace, microelectronics, precision instruments, fuel cells and other fields. Ceramics' poor machinability, low ductility and impact toughness, high brittleness, and other defects severely limit their application in the wear-resistant materials industry. Due to the large difference between the coefficient of thermal expansion of ceramics and metal, the residual thermal stresses generated during the connection process will destroy the integrity of the joint, thus increasing the difficulty of connecting ceramics and metal. The composite brazing method can effectively eliminate the residual thermal stress, which is one of the ideal methods to solve the problem of ceramic-metal connection. Composite brazing will be able to regulate the thermophysical properties of the material, thus greatly reducing the damage of residual thermal stresses on the joint, and then improve the strength of the ceramic/metal joint, the method not only increases the wettability of the brazing material on the ceramic side, which is irreplaceable in improving the bonding of the joint, but also eliminates the residual thermal stresses and ensures the integrity of the joint. This paper summarizes the current research status of ceramic/steel composite brazed joints in recent years, and investigates the mechanical properties and microinterfacial structure composition of the joints.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Research on Ceramic/Steel Connection Using the Composite Brazing Method
AU  - Deshui Yu
AU  - Yan Zhang
AU  - Jianping Zhou
AU  - Daqian Sun
AU  - Hongmei Li
Y1  - 2023/08/22
PY  - 2023
N1  - https://doi.org/10.11648/j.ijmsa.20231203.11
DO  - 10.11648/j.ijmsa.20231203.11
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 36
EP  - 40
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20231203.11
AB  - Ceramic/metal connectors are widely used in aerospace, microelectronics, precision instruments, fuel cells and other fields. Ceramics' poor machinability, low ductility and impact toughness, high brittleness, and other defects severely limit their application in the wear-resistant materials industry. Due to the large difference between the coefficient of thermal expansion of ceramics and metal, the residual thermal stresses generated during the connection process will destroy the integrity of the joint, thus increasing the difficulty of connecting ceramics and metal. The composite brazing method can effectively eliminate the residual thermal stress, which is one of the ideal methods to solve the problem of ceramic-metal connection. Composite brazing will be able to regulate the thermophysical properties of the material, thus greatly reducing the damage of residual thermal stresses on the joint, and then improve the strength of the ceramic/metal joint, the method not only increases the wettability of the brazing material on the ceramic side, which is irreplaceable in improving the bonding of the joint, but also eliminates the residual thermal stresses and ensures the integrity of the joint. This paper summarizes the current research status of ceramic/steel composite brazed joints in recent years, and investigates the mechanical properties and microinterfacial structure composition of the joints.
VL  - 12
IS  - 3
ER  -

Copy | Download