Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior

Giselly Bandeira Gomes Dias De Lima; Marcio Roberto Da Rocha

doi:doi:10.11648/j.ijmsa.20211006.11

| Peer-Reviewed

Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior

Giselly Bandeira Gomes Dias De Lima, Marcio Roberto Da Rocha

Published in International Journal of Materials Science and Applications (Volume 10, Issue 6)

Received: 17 September 2021 Accepted: 14 October 2021 Published: 23 November 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Martensitic stainless steels are chromium steels with a small addition of Ni. They have a good combination of mechanical properties and corrosion resistance, due to their Cr content [12]. The degradation processes are present in several industrial equipments and, generate repair or replacement actions in a periodic way. In an attempt to minimize these problems, several studies have been developed with this purpose. However, due to the several variables involved in the process, both in design and equipment operation, there is still a fertile field for an effective understanding of these degradation problems. For example, one can cite the effects that the different microstructures developed in martensitic stainless steels, materials commonly used in severe service conditions, present on the behavior of resistance to oxidation of the material. And, also, the environment in which the material is inserted. In a high-temperature environment, impurities are found, among them, compounds such as vanadium pentoxide, which act vigorously in the progression of the oxidation process. Oxidation tests are necessary to relate the behavior and influence exerted on the oxide layer by grain refinement. Thus, the present work aims to analyze the influence of the microstructure of the martensitic stainless steel AISI 420, with application of different treatments. The behavior of this steel was evaluated under different oxidation conditions, in contact with a solution containing Vanadium Pentoxide, and as a control parameter the mass variation of the samples. Analysis of the microstructures and the corrosion/oxidation products were carried out via Optical Microscopy, Scanning Electron Microscopy. As result it was verified the importance of the microstructure in the material's resistance to the action of degradation by oxidation, and its influence on the oxide layer formation process.

Published in	International Journal of Materials Science and Applications (Volume 10, Issue 6)
DOI	10.11648/j.ijmsa.20211006.11
Page(s)	129-133
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Degradation, Martensitic Stainless Steel, Vanadium Pentoxide

References

[1]	BOGDAN, R.; ALEKSANDER, G.; ALEKSANDRA, C. Microstucture and chemical composition of the oxide scale formed on the sanicro 25 steel tubes after fireside corrosion. Elsevier, 2015.
[2]	ANKUR, G.; RAJBIR, S.; GURMAIL, S. Study of high-temperature corrosion behavior of D-Gun spray coatings on ASTM-SA213, T-11 Steel in molten salt environment. 5th International Conference on Materials Processing and Characterization. Science Direct, 4, 142-151, 2017.
[3]	NATESAN, K.; PARK, J. H. Fireside and steamside corrosion of alloys for USC plants. International Association for Hydrogen Energy. Elsevier, 2006.
[4]	OlSSON, C,; LANDOLT, D. Passive ﬁlms on stainless steels/chemistry, structure and growth. Electrochimica Acta 48 (2003) 1093/1104.
[5]	KRAWCZYNSKA, A.; WITOLD, C.; MALGORZATA, L. Mechanical properties and corrosion resistance of ultrafine grained austenitic stainless steel processed by hydrostatic extrusion. ScienceDirect., 136, 34-44, 2017.
[6]	ABDULLA I.;, KHALED J.; SALEH, N. High temperature corrosion of martensitic steel of reheater pipes in a desalination power plant. ScienceDirect. 85, 89-96, 2018.
[7]	DALMAU, A.; RICHARD, C.; IGUAL, A. Degradation mechanisms in martensitic stainless steels: Wear, corrosion and tribocorrosion appraisal. ScienceDirect. 121, 167-179, 2018.
[8]	XIANGYU, Z.; XINQIANG, W. The characteristic of oxide scales on T91 tube after long-term service in an ultra-supercritical coal power plant. ScienceDirect. 72, 68-77, 2012.
[9]	ZHDANOV, V. Oxidation of metal nanoparticles with the grain growth in the oxide. ScienceDirect. 674, 136-140, 2017.
[10]	SAVI, B. M., TEIXEIRA, A., PAES, P. R. ROCHA, M. R., et al. Estudo comparativo de revestimentos depositados por aspersão térmica e solda na proteção de tubos de caldeiras a carvão mineral sujeitos à fireside corrosion.
[11]	PASSAGLIA, A. M., Estudo da determinação de Vanádio em petróleo e produtos relacionados por análise por ativação, 1972.
[12]	CHIAVERINI, V. Aços e Ferros Fundidos. Associação Brasileira de Metalurgia e Materiais – ABM. 7ª Ed., 2005.
[13]	COLPAERT, H. Metalografia dos produtos siderúrgicos comuns. 4.ed. São Paulo: Editora Blucher, 2008.
[14]	CALLISTER JR., William D.; RETHWISCH, David G. Ciência e Engenharia de Materiais: Uma Introdução. 8. ed. Rio de Janeiro: LTC, 2015.
[15]	LAROSA, M. A. Influência de tratamentos superficiais a laser em aços inoxidáveis utilizados em instrumentais cirúrgicos. Dissertação (Mestrado). Universidade Estadual de Campinas (UNICAMP), Departamento de Engenharia de Materiais, Comissão de Pós-Graduação em Engenharia Mecânica. Campinas – SP, 2005.

Cite This Article

Plain Text BibTeX RIS

APA Style

Giselly Bandeira Gomes Dias De Lima, Marcio Roberto Da Rocha. (2021). Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. International Journal of Materials Science and Applications, 10(6), 129-133. https://doi.org/10.11648/j.ijmsa.20211006.11

Copy | Download

ACS Style

Giselly Bandeira Gomes Dias De Lima; Marcio Roberto Da Rocha. Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. Int. J. Mater. Sci. Appl. 2021, 10(6), 129-133. doi: 10.11648/j.ijmsa.20211006.11

Copy | Download

AMA Style

Giselly Bandeira Gomes Dias De Lima, Marcio Roberto Da Rocha. Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. Int J Mater Sci Appl. 2021;10(6):129-133. doi: 10.11648/j.ijmsa.20211006.11

Copy | Download

@article{10.11648/j.ijmsa.20211006.11,
  author = {Giselly Bandeira Gomes Dias De Lima and Marcio Roberto Da Rocha},
  title = {Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior},
  journal = {International Journal of Materials Science and Applications},
  volume = {10},
  number = {6},
  pages = {129-133},
  doi = {10.11648/j.ijmsa.20211006.11},
  url = {https://doi.org/10.11648/j.ijmsa.20211006.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20211006.11},
  abstract = {Martensitic stainless steels are chromium steels with a small addition of Ni. They have a good combination of mechanical properties and corrosion resistance, due to their Cr content [12]. The degradation processes are present in several industrial equipments and, generate repair or replacement actions in a periodic way. In an attempt to minimize these problems, several studies have been developed with this purpose. However, due to the several variables involved in the process, both in design and equipment operation, there is still a fertile field for an effective understanding of these degradation problems. For example, one can cite the effects that the different microstructures developed in martensitic stainless steels, materials commonly used in severe service conditions, present on the behavior of resistance to oxidation of the material. And, also, the environment in which the material is inserted. In a high-temperature environment, impurities are found, among them, compounds such as vanadium pentoxide, which act vigorously in the progression of the oxidation process. Oxidation tests are necessary to relate the behavior and influence exerted on the oxide layer by grain refinement. Thus, the present work aims to analyze the influence of the microstructure of the martensitic stainless steel AISI 420, with application of different treatments. The behavior of this steel was evaluated under different oxidation conditions, in contact with a solution containing Vanadium Pentoxide, and as a control parameter the mass variation of the samples. Analysis of the microstructures and the corrosion/oxidation products were carried out via Optical Microscopy, Scanning Electron Microscopy. As result it was verified the importance of the microstructure in the material's resistance to the action of degradation by oxidation, and its influence on the oxide layer formation process.},
 year = {2021}
}

Copy | Download

TY - JOUR
T1 - Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior
AU - Giselly Bandeira Gomes Dias De Lima
AU - Marcio Roberto Da Rocha
Y1 - 2021/11/23
PY - 2021
N1 - https://doi.org/10.11648/j.ijmsa.20211006.11
DO - 10.11648/j.ijmsa.20211006.11
T2 - International Journal of Materials Science and Applications
JF - International Journal of Materials Science and Applications
JO - International Journal of Materials Science and Applications
SP - 129
EP - 133
PB - Science Publishing Group
SN - 2327-2643
UR - https://doi.org/10.11648/j.ijmsa.20211006.11
AB - Martensitic stainless steels are chromium steels with a small addition of Ni. They have a good combination of mechanical properties and corrosion resistance, due to their Cr content [12]. The degradation processes are present in several industrial equipments and, generate repair or replacement actions in a periodic way. In an attempt to minimize these problems, several studies have been developed with this purpose. However, due to the several variables involved in the process, both in design and equipment operation, there is still a fertile field for an effective understanding of these degradation problems. For example, one can cite the effects that the different microstructures developed in martensitic stainless steels, materials commonly used in severe service conditions, present on the behavior of resistance to oxidation of the material. And, also, the environment in which the material is inserted. In a high-temperature environment, impurities are found, among them, compounds such as vanadium pentoxide, which act vigorously in the progression of the oxidation process. Oxidation tests are necessary to relate the behavior and influence exerted on the oxide layer by grain refinement. Thus, the present work aims to analyze the influence of the microstructure of the martensitic stainless steel AISI 420, with application of different treatments. The behavior of this steel was evaluated under different oxidation conditions, in contact with a solution containing Vanadium Pentoxide, and as a control parameter the mass variation of the samples. Analysis of the microstructures and the corrosion/oxidation products were carried out via Optical Microscopy, Scanning Electron Microscopy. As result it was verified the importance of the microstructure in the material's resistance to the action of degradation by oxidation, and its influence on the oxide layer formation process.
VL - 10
IS - 6
ER -

Copy | Download

Author Information

Giselly Bandeira Gomes Dias De Lima

Engineering Department, Federal University of Santa Catarina, Blumenau, Brazil
Marcio Roberto Da Rocha

Engineering Department, Federal University of Santa Catarina, Blumenau, Brazil

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Giselly Bandeira Gomes Dias De Lima, Marcio Roberto Da Rocha. (2021). Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. International Journal of Materials Science and Applications, 10(6), 129-133. https://doi.org/10.11648/j.ijmsa.20211006.11

Copy | Download

ACS Style

Giselly Bandeira Gomes Dias De Lima; Marcio Roberto Da Rocha. Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. Int. J. Mater. Sci. Appl. 2021, 10(6), 129-133. doi: 10.11648/j.ijmsa.20211006.11

Copy | Download

AMA Style

Giselly Bandeira Gomes Dias De Lima, Marcio Roberto Da Rocha. Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior. Int J Mater Sci Appl. 2021;10(6):129-133. doi: 10.11648/j.ijmsa.20211006.11

Copy | Download

@article{10.11648/j.ijmsa.20211006.11,
  author = {Giselly Bandeira Gomes Dias De Lima and Marcio Roberto Da Rocha},
  title = {Effect of Microstructural Variation of a Martensitic Stainless Steel on High Temperature Degradation Behavior},
  journal = {International Journal of Materials Science and Applications},
  volume = {10},
  number = {6},
  pages = {129-133},
  doi = {10.11648/j.ijmsa.20211006.11},
  url = {https://doi.org/10.11648/j.ijmsa.20211006.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20211006.11},
  abstract = {Martensitic stainless steels are chromium steels with a small addition of Ni. They have a good combination of mechanical properties and corrosion resistance, due to their Cr content [12]. The degradation processes are present in several industrial equipments and, generate repair or replacement actions in a periodic way. In an attempt to minimize these problems, several studies have been developed with this purpose. However, due to the several variables involved in the process, both in design and equipment operation, there is still a fertile field for an effective understanding of these degradation problems. For example, one can cite the effects that the different microstructures developed in martensitic stainless steels, materials commonly used in severe service conditions, present on the behavior of resistance to oxidation of the material. And, also, the environment in which the material is inserted. In a high-temperature environment, impurities are found, among them, compounds such as vanadium pentoxide, which act vigorously in the progression of the oxidation process. Oxidation tests are necessary to relate the behavior and influence exerted on the oxide layer by grain refinement. Thus, the present work aims to analyze the influence of the microstructure of the martensitic stainless steel AISI 420, with application of different treatments. The behavior of this steel was evaluated under different oxidation conditions, in contact with a solution containing Vanadium Pentoxide, and as a control parameter the mass variation of the samples. Analysis of the microstructures and the corrosion/oxidation products were carried out via Optical Microscopy, Scanning Electron Microscopy. As result it was verified the importance of the microstructure in the material's resistance to the action of degradation by oxidation, and its influence on the oxide layer formation process.},
 year = {2021}
}

Copy | Download