Circular Economy (CE) is receiving increasing attention worldwide and is increasingly seen as a major policy agenda item and a testing challenge, for the construction sector. New construction investment management models in the CE trend is analyzed by new designs building constructions with new output data for constructions with the use of new building materials containing a part of the recycling materials. This research paper aims to determine the enablers of a CE for sustainable development in designing and making upgrade of engineering solutions that include current projects for the protection of our planet from the thermal effect. Construction is a resource-intensive industry where a circular economy (CE) is essential to minimize global impacts and conserve natural resources. Research into the use of retaining walls and the use of recycled materials allows for the continuous development of the field of retaining structures. The article presents a method for optimizing the development area in mountainous areas by leveling the terrain and using a slab-angular retaining wall. The main topic of the article is land leveling, designing a retaining wall and presenting the use of recycled raw materials. The publication presents patterns and methods for designing a reinforced concrete slab-angular structure in accordance with EC7, as well as the possibilities of using recycled materials.
| Published in | International Journal of Engineering Management (Volume 8, Issue 1) |
| DOI | 10.11648/j.ijem.20240801.11 |
| Page(s) | 1-9 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Leveling of Land, Retaining Wall, Circular Economy, Geotechnics, Material Recovery, Recycling, Eurocode 7, Calculations of a Slab-Angular Wall
| [1] | Kobiak J., Stachurski W.: Konstrukcje żelbetowe Tom III, Wydanie piąte znowelizowane, Arkady, Warszawa 1989. |
| [2] | Juraszek J., Gwozdz-Lason M., Gago F., Bulko R. (2023) FBG Monitoring of a Communication Paths and Roadways with a Geosynthetic Systems on Mining Heaps, pp. 414-425; Civil and Environmental Engineering 2023 Vol. 19, Issue 1; eISSN 2199-6512; |
| [3] | Bulko R., Mužík J., Gwóźdź-Lasoń M., Juraszek J., Segalini A., (2023) Stability of the Čachtice Underground Corridors; Civil and Environmental Engineering 2023; Vol. 19, Issue 1; pp. 339-347; e-ISSN 2199-6512; |
| [4] | Gwozdz - Lason Monika (2023) Building Management System BMS as a Modern, Intelligent Building Management System for Zero-energetic Object Smart Building, Seventh Edition of Global Energy Meet, Abstract, March 6-8 and 9-10, 2023, Boston, MA; USA. |
| [5] | Gwozdz - Lasoń Monika, BERSKI Łukasz. (2023) Project management for the construction sector in the field of foundation of designed residential building located in this area with the expected impact of mining operation; International Journal of Advanced Research in Engineering & Management (IJAREM) 2023. IJAREM-E7197 vol. 9, issue 01, 2023, 6, pp. 15-22, ISSN: 2456-2033. |
| [6] | Gwozdz – Lason M., Kohutek J. (2022) Project management for the construction sector in the field of foundation of buildings in complex conditions of the subsoil; International Journal of Advanced Research in Engineering & Management (IJAREM) 2022. IJAREM-E7197 ISSN: 2456-2033, vol. 8, issue 10, 2022, 11, pp. 11-20, ISSN: 2456-2033. |
| [7] | Gwozdz - Lason M. (2022) CE trend for construction in the aspect of analyzing the impact of new building materials from recycling on the technical condition and value of real estate, Abstrakt, 5th CONFERENCE “ENVIRONMENTAL ENGINEERING AND DESIGN”, 13-14.10.2022, ISBN 978-83-950036-3-9, Uniwersytet Zielonogórski, WBAiIŚ. |
| [8] | Zhang, C., Hu, M., Sprecher, B., Yang, X., Zhong, X., Li, C. and Tukker, A. (2021) ‘Recycling potential in building energy renovation: A prospective study of the Dutch residential building stock up to 2050’, Journal of Cleaner Production, vol. 301, art. 126835, |
| [9] | Kadela M., Gwozdz - Lason M. (2022) Zastosowanie geosyntetyków przy wzmocnieniu podłoża pod nawierzchnie drogowe, Czasopismo Magazyn Autostrady, 2022, Tom 6 Wydanie 2022, str. 36-41 Wydawca Magazyn Autostrady; ISSN 1730-0703; |
| [10] | Gwozdz - Lason M., Boczkowska K. (2022) Management for Stability Analysis and Design of Slope, International Journal of Advanced Research in Engineering and Management, Volume 08, Issue 04, April 2022, 1, pp. 01-09, ISSN: 2456-2033, |
| [11] | EN 1997-1 -2 Eurocode 7: Geotechnical design - Part 1 and 2: European Standard. |
| [12] | Kadela M., Gwozdz – Lason M., Dudko – Pawlowska I. (2016) The use of mining and metallurgical waste with defined parameters on selected examples, Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią Polskiej Akademii Nauk, ISSN 2080-0819, 2016; 94: 229-242. |
| [13] | Gwozdz – Lason M. (2019) Effect of Active Mining Impact On Properties with Engineering Structures – Forecast and Final Result Discrepancies, IOP Conference Series: Earth and Environmental Science 221: 012103, ISSN: 1755-1307, 1755-1315, |
| [14] |
Błaszczyk W. Gwozdz-Lason M., (2023) Analiza systemu ochrony konstrukcji inżynierskich przed spadającymi odłamkami skalnymi na przykładzie elastycznej bariery Geobrugg GBE500A, Rozdział w monografia pt. Innowacje techniczne i technologiczne w naukach inżynieryjnych - monografia naukowa; str. 199-226; Wydawnictwo Naukowe TYGIEL sp. z o. o. ISBN: 978-83-67881-18-0
https://bc.wydawnictwo-tygiel.pl/publikacja/477A2780-DA67-8BE4-0E2F-2A971BF37BD0 |
| [15] | Gwozdz – Lason M. (2017) Slope Reinforcement with the Utilization of the Coal Waste Anthropogenic Material; IOP Conference Series Materials Science and Engineering, 245(3), 032051; October 2017; |
| [16] | Teizer, J., Neve, H., Li, H., Wandahl, S., König, J., Ochner, B., König, M., Lerche, J., 2020. Construction resource efficiency improvement by long Range Wide Areanetwork tracking and monitoring. Autom. Constr. 116, 103245. |
| [17] | Silvestre, J. D., de Brito, J., Pinheiro, M. D., 2014. Environmental impacts and benefitsof the end-of-life of building materials – calculation rules, results and contributionto a ‘‘cradle to cradle’’ life cycle. J. Cleaner Prod. 66, 37–45. |
| [18] | Shi, Y., Xu, J., 2021. BIM-Based information system for econo-enviro-friendly end-of-lifedisposal of construction and demolition waste. Autom. Constr. 125, 103611. |
| [19] | Hossain, M. U., Ng, S. T., Antwi-Afari, P., Amor, B., 2020. Circular economy and the construction industry: Existing trends, challenges and prospective framework for sustainable construction. Renew. Sustain. Energy Rev. 130. |
| [20] | Iacob, M. E., Meertens, L. O., Jonkers, H., Quartel, D. A. C., Nieuwenhuis, L. J. M., van Sinderen, M. J., 2014. From enterprise architecture to business models and back. Softw. Syst. Model. 13 (3), 1059–1083. |
| [21] | Miatto, A., Sartori, C., Bianchi, M., Borin, P., Giordano, A., Saxe, S., Graedel, T. E., 2021. Tracking the material cycle of Italian bricks with the aid of building information modeling. J. Ind. Ecol. 1 (15). |
| [22] | VDZ (2021) Decarbonisation pathways for the Australian cement and concrete sector, The Cement Industry Federation, Cement Concrete and Aggregates Australia, SmartCrete CRC and RACE for 2030 CRC, accessed 1 May 2023, |
| [23] | Venkataraman, M., Csereklyei, Z., Aisbett, E., Rahbari, A., Jotzo, F., Lord, M. and Pye, J. (2022) ‘Zero-carbon steel production: the opportunities and role for Australia’, Energy Policy, vol. 163, art. 112811. |
APA Style
Gwozdz-Lason, M., Grzegorzek, J. (2024). Optimization of Land Property Area for Construction Investments in the Aspect of CE - Circular Economy for Civil Engineering. International Journal of Engineering Management, 8(1), 1-9. https://doi.org/10.11648/j.ijem.20240801.11
ACS Style
Gwozdz-Lason, M.; Grzegorzek, J. Optimization of Land Property Area for Construction Investments in the Aspect of CE - Circular Economy for Civil Engineering. Int. J. Eng. Manag. 2024, 8(1), 1-9. doi: 10.11648/j.ijem.20240801.11
AMA Style
Gwozdz-Lason M, Grzegorzek J. Optimization of Land Property Area for Construction Investments in the Aspect of CE - Circular Economy for Civil Engineering. Int J Eng Manag. 2024;8(1):1-9. doi: 10.11648/j.ijem.20240801.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijem.20240801.11,
author = {Monika Gwozdz-Lason and Jakub Grzegorzek},
title = {Optimization of Land Property Area for Construction Investments in the Aspect of CE - Circular Economy for Civil Engineering
},
journal = {International Journal of Engineering Management},
volume = {8},
number = {1},
pages = {1-9},
doi = {10.11648/j.ijem.20240801.11},
url = {https://doi.org/10.11648/j.ijem.20240801.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijem.20240801.11},
abstract = {Circular Economy (CE) is receiving increasing attention worldwide and is increasingly seen as a major policy agenda item and a testing challenge, for the construction sector. New construction investment management models in the CE trend is analyzed by new designs building constructions with new output data for constructions with the use of new building materials containing a part of the recycling materials. This research paper aims to determine the enablers of a CE for sustainable development in designing and making upgrade of engineering solutions that include current projects for the protection of our planet from the thermal effect. Construction is a resource-intensive industry where a circular economy (CE) is essential to minimize global impacts and conserve natural resources. Research into the use of retaining walls and the use of recycled materials allows for the continuous development of the field of retaining structures. The article presents a method for optimizing the development area in mountainous areas by leveling the terrain and using a slab-angular retaining wall. The main topic of the article is land leveling, designing a retaining wall and presenting the use of recycled raw materials. The publication presents patterns and methods for designing a reinforced concrete slab-angular structure in accordance with EC7, as well as the possibilities of using recycled materials.
},
year = {2024}
}
TY - JOUR T1 - Optimization of Land Property Area for Construction Investments in the Aspect of CE - Circular Economy for Civil Engineering AU - Monika Gwozdz-Lason AU - Jakub Grzegorzek Y1 - 2024/05/17 PY - 2024 N1 - https://doi.org/10.11648/j.ijem.20240801.11 DO - 10.11648/j.ijem.20240801.11 T2 - International Journal of Engineering Management JF - International Journal of Engineering Management JO - International Journal of Engineering Management SP - 1 EP - 9 PB - Science Publishing Group SN - 2640-1568 UR - https://doi.org/10.11648/j.ijem.20240801.11 AB - Circular Economy (CE) is receiving increasing attention worldwide and is increasingly seen as a major policy agenda item and a testing challenge, for the construction sector. New construction investment management models in the CE trend is analyzed by new designs building constructions with new output data for constructions with the use of new building materials containing a part of the recycling materials. This research paper aims to determine the enablers of a CE for sustainable development in designing and making upgrade of engineering solutions that include current projects for the protection of our planet from the thermal effect. Construction is a resource-intensive industry where a circular economy (CE) is essential to minimize global impacts and conserve natural resources. Research into the use of retaining walls and the use of recycled materials allows for the continuous development of the field of retaining structures. The article presents a method for optimizing the development area in mountainous areas by leveling the terrain and using a slab-angular retaining wall. The main topic of the article is land leveling, designing a retaining wall and presenting the use of recycled raw materials. The publication presents patterns and methods for designing a reinforced concrete slab-angular structure in accordance with EC7, as well as the possibilities of using recycled materials. VL - 8 IS - 1 ER -
Department of Civil Engineering, Faculty of Materials, Civil and Environmental Engineering, University of Bielsko-Biala, Bielsko-Biala, Poland
Department of Civil Engineering, Faculty of Materials, Civil and Environmental Engineering, University of Bielsko-Biala, Bielsko-Biala, Poland
Information