| Peer-Reviewed

Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements

Received: 3 February 2020     Accepted: 18 February 2020     Published: 27 August 2020
Views:       Downloads:
Abstract

This paper looked at the potentials of partially replacing palm kernel shells with coarse aggregates in road binder course with emphasis on strength of the asphalt concrete as given by the Marshal Stability and flow values. The aim of the study was to assess the suitability of replacing coarse aggregates with palm kernel shells in highway pavements. The following methodology was adopted in the research, Specified proportions of each material such as 4% filler of size 0.075mm, 35% quarry stone dust of maximum size 5mm, 6% river sand of maximum size 5mm also and 20% crushed stone of size 5-16mm, 35% crushed stone of size 16-20 mm with 6% bitumen of penetration grade 60/70 was mixed together at 163°C. The mixture was compacted with 50 blows both at the top and bottom to obtain cylindrical samples for the Marshall Stability tests. Palm kernel shells were partially replaced at 0%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, and 100% by weight of total coarse aggregate in the mixture. The study found that palm kernel shells can be used to replace coarse aggregate up to 20% before drastic reductions become noticeable. It is therefore recommended that for heavily trafficked roads, palm kernel shells up to 10% can be used for the replacement while even above 70% replacement is possible for lightly trafficked roads in the rural settings.

Published in International Journal of Engineering Management (Volume 4, Issue 2)
DOI 10.11648/j.ijem.20200402.12
Page(s) 25-29
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Palm Kernel Shells, Coarse Aggregate, Fine Aggregate, Bitumen, Filler Material, Asphalt Concrete

References
[1] Alengaram U. J, Jumaat M. Z, Mahmud H. (2010). Ductility Behaviour of Reinforced Palm Kernel Shell Concrete Beams. Eur. J. Scientific Res., 23: 406-420.
[2] BS 1881, Testing of Concrete, 1996.
[3] British Standards Institution (BS 598, 1985). Methods of determination of index properties of pitch-bitumen Binder, pp. 2-16, 1985.
[4] British Standard Institution. (1980). BS 3148 Part 2 Test of Water for Making Concrete. London: BSI.
[5] British Standards Institution (BS 812, 1975), Methods of determination of mechanical properties of aggregate, 1995, Part 3, p. 4-8.
[6] Mefteh O, Kebaili H, Oucief L, Berredjem N. A. (2013). Influence of moisture conditioning of recycled aggregates on the properties of fresh and hardened concrete. J Clean Prod 54: 282–288.
[7] Nuhu-Koko M. K. (1990). The use of Palm kernel shells as aggregates for concrete, Paper presented at 21st Annual Conference of Materials Testing, Control and Research, Federal Ministry of Works, Lagos, Nigeria.
[8] Noh Irwan Ahmad, Khairulzan Yahya, (2014). “The effect of oil palm shell as coarse aggregate replacement on densities and compressive strength of concrete”, Faculty of civil engineering, Universiti teknologi malaysia, oil palm ind. Econ. J. 1 (3): 32-36.
[9] Oglesby, C, and Hicks, R. (1982). Highway Engineering, fourth edition, John Wesley and sons, New York.
[10] Olutoge, F. A. (2010). Investigations on sawdust and palm kernel shells as aggregate replacement. APRN Journal of Engineering and Applied Science, 5 (4), 7-13.
[11] Pelisser F, Zavarise N, Longo T. A, Bernardin A. M. (2011) Concrete made with recycled tire rubber: effect of alkaline activation and silica fume addition. J Clean Prod 19 (6): 757–763.
[12] Sashidar, C. and Rao, H. S. (2010). Durability Studies on Concrete with Wood Ash Additive. 35th Conference on Our World in Concrete and Structures, August 2010, Singapore.
[13] Ukwedeh, J. N. (2017). “History of Igala Kingdom”. 4th ed. Arewa House Press, Ahmadu Bello University.
[14] Zarina Itam, Salmia Beddu, Nur Liyana Mohd Kamal, Md Ashraful Alam, Usama Issa Ayas, (2016). “The feasibility of palm kernel shell as a replacement for coarse aggregate in lightweight concrete”, International conference on advances in renewable energy and technologies (ICARET) IOP publishing, doi: 10.1088/17551315/32/1/012040.
Cite This Article
  • APA Style

    Apeh Ocholi Adejoh Samuel. (2020). Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements. International Journal of Engineering Management, 4(2), 25-29. https://doi.org/10.11648/j.ijem.20200402.12

    Copy | Download

    ACS Style

    Apeh Ocholi Adejoh Samuel. Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements. Int. J. Eng. Manag. 2020, 4(2), 25-29. doi: 10.11648/j.ijem.20200402.12

    Copy | Download

    AMA Style

    Apeh Ocholi Adejoh Samuel. Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements. Int J Eng Manag. 2020;4(2):25-29. doi: 10.11648/j.ijem.20200402.12

    Copy | Download

  • @article{10.11648/j.ijem.20200402.12,
      author = {Apeh Ocholi Adejoh Samuel},
      title = {Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements},
      journal = {International Journal of Engineering Management},
      volume = {4},
      number = {2},
      pages = {25-29},
      doi = {10.11648/j.ijem.20200402.12},
      url = {https://doi.org/10.11648/j.ijem.20200402.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijem.20200402.12},
      abstract = {This paper looked at the potentials of partially replacing palm kernel shells with coarse aggregates in road binder course with emphasis on strength of the asphalt concrete as given by the Marshal Stability and flow values. The aim of the study was to assess the suitability of replacing coarse aggregates with palm kernel shells in highway pavements. The following methodology was adopted in the research, Specified proportions of each material such as 4% filler of size 0.075mm, 35% quarry stone dust of maximum size 5mm, 6% river sand of maximum size 5mm also and 20% crushed stone of size 5-16mm, 35% crushed stone of size 16-20 mm with 6% bitumen of penetration grade 60/70 was mixed together at 163°C. The mixture was compacted with 50 blows both at the top and bottom to obtain cylindrical samples for the Marshall Stability tests. Palm kernel shells were partially replaced at 0%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, and 100% by weight of total coarse aggregate in the mixture. The study found that palm kernel shells can be used to replace coarse aggregate up to 20% before drastic reductions become noticeable. It is therefore recommended that for heavily trafficked roads, palm kernel shells up to 10% can be used for the replacement while even above 70% replacement is possible for lightly trafficked roads in the rural settings.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Assessment of Palm Kernel Shells as Partial Replacement of Coarse Aggregates in Highway Pavements
    AU  - Apeh Ocholi Adejoh Samuel
    Y1  - 2020/08/27
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ijem.20200402.12
    DO  - 10.11648/j.ijem.20200402.12
    T2  - International Journal of Engineering Management
    JF  - International Journal of Engineering Management
    JO  - International Journal of Engineering Management
    SP  - 25
    EP  - 29
    PB  - Science Publishing Group
    SN  - 2640-1568
    UR  - https://doi.org/10.11648/j.ijem.20200402.12
    AB  - This paper looked at the potentials of partially replacing palm kernel shells with coarse aggregates in road binder course with emphasis on strength of the asphalt concrete as given by the Marshal Stability and flow values. The aim of the study was to assess the suitability of replacing coarse aggregates with palm kernel shells in highway pavements. The following methodology was adopted in the research, Specified proportions of each material such as 4% filler of size 0.075mm, 35% quarry stone dust of maximum size 5mm, 6% river sand of maximum size 5mm also and 20% crushed stone of size 5-16mm, 35% crushed stone of size 16-20 mm with 6% bitumen of penetration grade 60/70 was mixed together at 163°C. The mixture was compacted with 50 blows both at the top and bottom to obtain cylindrical samples for the Marshall Stability tests. Palm kernel shells were partially replaced at 0%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, and 100% by weight of total coarse aggregate in the mixture. The study found that palm kernel shells can be used to replace coarse aggregate up to 20% before drastic reductions become noticeable. It is therefore recommended that for heavily trafficked roads, palm kernel shells up to 10% can be used for the replacement while even above 70% replacement is possible for lightly trafficked roads in the rural settings.
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Civil Engineering, The Federal Polytechnic Idah, North Central, Nigeria

  • Sections