| Peer-Reviewed

Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes

Received: 5 September 2023     Accepted: 28 September 2023     Published: 14 October 2023
Views:       Downloads:
Abstract

In recent years, photocatalytic oxidation (PEC) technology has been widely studied in the field of water pollution remediation as an effective way to accelerate the degradation rate of organic matter. However, the external electric field applied by commonly used PEC wastewater treatment tanks is mostly provided by external equipment, therefore the pollution reduction process is accompanied by inevitable additional energy consumption. Aimed to reduce energy consumption and carbon emission, we designed a PEC tank which gets the extra bias voltage input from a biogas solid oxide fuel cell (SOFC) based on PrBaMn2O5+δ electrodes. The PrBaMn2O5+δ (PBMO) double perovskite powder has mainly tetragonal phase in both reduced and oxidized atmosphere. The polarization resistances of the PBMO electrodes with PBMO|SDC functional layers were 0.08 and 0.78 Ω•cm2 in air and simulated biogas respectively. Using simulated biogas (70% CH4 and 30% CO2) with 3% water vapor as the fuel and ambient air as the oxidant, the SOFC power density can achieve 325.5 and 234.8 mW•cm−2 at 700 and 650°C, respectively. Using MoS2/Ti as photoanode for the PEC tank, with applied bias of 0.5 V in 0.02 M Na2SO3 electrolyte, and with pH=3, the degradation rate of chlorpyrifos (CPF) in PEC tank can achieve 99.7% after 4 hours.

Published in International Journal of Energy and Environmental Science (Volume 8, Issue 5)
DOI 10.11648/j.ijees.20230805.12
Page(s) 100-106
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Photoelectrocatalytic, Biogas, SOFC

References
[1] Q. Wang, X. Li, W. Liu, et al., “Carbon source recovery from waste sludge reduces greenhouse gas emissions in a pilot-scale industrial wastewater treatment plant,” Environmental Science and Ecotechnology, vol. 14, 2022, pp. 100235-100242.
[2] H. Wang, Y. Yang, A. A. Keller, et al., “Comparative analysis of energy intensity and carbon emissions in wastewater treatment in USA, Germany, China and South Africa,” Applied Energy, vol. 184 2016, pp. 873-881.
[3] Z. Hao, R. Wang, L. Zhang, et al., “More comprehensive heterojunction mechanism: Enhanced PEC properties originated from novel ZnIn2S4/Cu2S heterojunction assisted by changed surface states,” Chemical Engineering Journal, vol. 468, 2023, pp. 143568-143578.
[4] C. Liu, D. Kong, P. C. Hsu, et al., “Rapid water disinfection using vertically aligned MoS2 nanofilms and visible light,” Nature Nanotechnology, vol. 11, 2016, pp. 1098-1104.
[5] B. Illathukandy, S. A. Saadabadi, P-C Kuo, et al., “Solid oxide fuel cells (SOFCs) fed with biogas containing hydrogen chloride traces: Impact on direct internal reforming and electrochemical performance,” Electrochimica Acta, vol. 433, 2022, pp. 141198-141210.
[6] J. Yan, Z. G. Chen, H. Y. Ji, et al., “Cover Picture: Construction of a 2D graphene-like MoS2/C3N4 heterojunction with enhanced visible-light photocatalytic activity and photoelectrochemical activity,” Chemistry-A European Journal, vol. 22, 2016, pp. 4764-4773.
[7] S. W. Tao, J. T. S. Irvine, “Synthesis and characterization of (La0.75Sr0.25)Cr0.5Mn0.5O3–δ, a redox-stable, efficient perovskite anode for SOFCs,” J. Electrochem. Soc., vol. 151, 2004, pp. A252-259.
[8] R. Mukundan, E. L. Brosha, F. H. Garzon, “Sulfur tolerant anodes for SOFCs,” Electrochem Solid-State Lett., vol. 7, 2004, pp. A5-A7.
[9] Q. X. Fu, F. Tietz, D. St¨over, “La0.4Sr0.6Ti1–xMnxO3–δ perovskites as anode materials for solid oxide fuel cells,” J. Electrochem. Soc., vol. 153, 2006, pp. D74-D83.
[10] X. Sun, S. Wang, Z. Wang, X. Ye, T. Wen, F. Huang, “Anode performance of LST–xCeO2 for solid oxide fuel cells,” J. Power Sources, vol. 183, 2008, pp. 114-117.
[11] J. C. Ruiz-Morales, J. Canales-Vázquez, C. Savaniu, D. Marrero-López, W. Zhou and J. T. S. Irvine, “Disruption of extended defects in solid oxide fuel cell anode for methane oxidation,” Nature, vol. 439, 2006, pp. 568-571.
[12] X. J. Chen, Q. L. Liu, S. H. Chan, N. P. Brandon, K. A. Khor, “High performance cathode-supported SOFC with perovskite anode operating in weakly humidified hydrogen and methane,” Electrochem. Commun., vol. 9, 2007, pp. 767-772.
[13] Y. H. Huang, R. I. Dass, Z. L. Xing, J. B. Goodenough, “Double perovskites as anode materials for solid oxide fuel cells,” Science, vol. 31, 2006, pp. 254-257.
[14] Q. Zhang, T. Wei, Y.-H. Huang, “Electrochemical performance of double-perovskite Ba2MMoO6 (M = Fe, Co, Mn, Ni) anode materials for solid oxide fuel cells,” J. Power Sources, vol. 198, 2012, pp. 59-65.
[15] L. Yang, S. Wang, K. Blinn, M. Liu, Z. Liu, Z. Cheng, M. Liu, “Enhanced sulfur and coking tolerance of a mxed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2–xYbxO3–δ,” Science, vol. 326, 2009, pp. 126-129.
[16] S. Sengodan, S. Choi, A. Jun, T. H. Shin, Y.-W. Ju, H. Y. Jeong, J. Shin, J. T. S. Irvine, G. Kim, “Layered Oxygen-Deficient Double Perovskite as an Efficient and Stable Anode for Direct Hydrocarbon Solid Oxide Fuel Cells,” Nat. Mater., vol. 14, 2014, pp. 205−209.
[17] S. Choi, S. Sengodan, S. Park, Y. W. Ju, J. Kim, J. Hyodo, H. Y. Jeong, T. Ishihara, J. Shin, G. Kim, “A robust symmetrical electrode with layered perovskite structure for direct hydrocarbon solid oxide fuel cells: PrBa0.8Ca0.2Mn2O5+δ. J. Mater. Chem. A, vol. 4, 2016, pp. 1747−1753.
[18] Y.-F. Sun, Y.-Q. Zhang, B. Hua, Y. Behnamian, J. Li, S.-H. Cui, J.-H. Li, J.-L. Luo, “Molybdenum doped Pr0.5Ba0.5MnO3−δ (Mo-PBMO) double perovskite as a potential solid oxide fuel cell anode material,” J. Power Sources, vol. 301, 2016, pp. 237-241.
[19] D. Gu, G. Zhang, J. Zou., “High temperature thermo-photocatalysis driven carbon removal in direct biogas fueled solid oxide fuel cells,” Chinese Chemical Letters, vol. 32, 2021, pp. 3548-3552.
[20] Y. Zhou, G. Zhang, J. Zou, “Photoelectrocatalytic generation of miscellaneous oxygen-based radicals towards cooperative degradation of multiple organic pollutants in water,” Water Reuse, vol. 11, 2021, pp. 531-541.
Cite This Article
  • APA Style

    Doudou Gu, Guan Zhang, Jing Zou. (2023). Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes. International Journal of Energy and Environmental Science, 8(5), 100-106. https://doi.org/10.11648/j.ijees.20230805.12

    Copy | Download

    ACS Style

    Doudou Gu; Guan Zhang; Jing Zou. Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes. Int. J. Energy Environ. Sci. 2023, 8(5), 100-106. doi: 10.11648/j.ijees.20230805.12

    Copy | Download

    AMA Style

    Doudou Gu, Guan Zhang, Jing Zou. Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes. Int J Energy Environ Sci. 2023;8(5):100-106. doi: 10.11648/j.ijees.20230805.12

    Copy | Download

  • @article{10.11648/j.ijees.20230805.12,
      author = {Doudou Gu and Guan Zhang and Jing Zou},
      title = {Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes},
      journal = {International Journal of Energy and Environmental Science},
      volume = {8},
      number = {5},
      pages = {100-106},
      doi = {10.11648/j.ijees.20230805.12},
      url = {https://doi.org/10.11648/j.ijees.20230805.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijees.20230805.12},
      abstract = {In recent years, photocatalytic oxidation (PEC) technology has been widely studied in the field of water pollution remediation as an effective way to accelerate the degradation rate of organic matter. However, the external electric field applied by commonly used PEC wastewater treatment tanks is mostly provided by external equipment, therefore the pollution reduction process is accompanied by inevitable additional energy consumption. Aimed to reduce energy consumption and carbon emission, we designed a PEC tank which gets the extra bias voltage input from a biogas solid oxide fuel cell (SOFC) based on PrBaMn2O5+δ electrodes. The PrBaMn2O5+δ (PBMO) double perovskite powder has mainly tetragonal phase in both reduced and oxidized atmosphere. The polarization resistances of the PBMO electrodes with PBMO|SDC functional layers were 0.08 and 0.78 Ω•cm2 in air and simulated biogas respectively. Using simulated biogas (70% CH4 and 30% CO2) with 3% water vapor as the fuel and ambient air as the oxidant, the SOFC power density can achieve 325.5 and 234.8 mW•cm−2 at 700 and 650°C, respectively. Using MoS2/Ti as photoanode for the PEC tank, with applied bias of 0.5 V in 0.02 M Na2SO3 electrolyte, and with pH=3, the degradation rate of chlorpyrifos (CPF) in PEC tank can achieve 99.7% after 4 hours.},
     year = {2023}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Photoelectrocatalytic Degradation of Chlorpyrifos Wastewater Paired with Biogas SOFC Based on PrBaMn2O5+δ Electrodes
    AU  - Doudou Gu
    AU  - Guan Zhang
    AU  - Jing Zou
    Y1  - 2023/10/14
    PY  - 2023
    N1  - https://doi.org/10.11648/j.ijees.20230805.12
    DO  - 10.11648/j.ijees.20230805.12
    T2  - International Journal of Energy and Environmental Science
    JF  - International Journal of Energy and Environmental Science
    JO  - International Journal of Energy and Environmental Science
    SP  - 100
    EP  - 106
    PB  - Science Publishing Group
    SN  - 2578-9546
    UR  - https://doi.org/10.11648/j.ijees.20230805.12
    AB  - In recent years, photocatalytic oxidation (PEC) technology has been widely studied in the field of water pollution remediation as an effective way to accelerate the degradation rate of organic matter. However, the external electric field applied by commonly used PEC wastewater treatment tanks is mostly provided by external equipment, therefore the pollution reduction process is accompanied by inevitable additional energy consumption. Aimed to reduce energy consumption and carbon emission, we designed a PEC tank which gets the extra bias voltage input from a biogas solid oxide fuel cell (SOFC) based on PrBaMn2O5+δ electrodes. The PrBaMn2O5+δ (PBMO) double perovskite powder has mainly tetragonal phase in both reduced and oxidized atmosphere. The polarization resistances of the PBMO electrodes with PBMO|SDC functional layers were 0.08 and 0.78 Ω•cm2 in air and simulated biogas respectively. Using simulated biogas (70% CH4 and 30% CO2) with 3% water vapor as the fuel and ambient air as the oxidant, the SOFC power density can achieve 325.5 and 234.8 mW•cm−2 at 700 and 650°C, respectively. Using MoS2/Ti as photoanode for the PEC tank, with applied bias of 0.5 V in 0.02 M Na2SO3 electrolyte, and with pH=3, the degradation rate of chlorpyrifos (CPF) in PEC tank can achieve 99.7% after 4 hours.
    VL  - 8
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • School of Civil and Environmental Engineering, Harbin Institute of Technology, Shenzhen, P. R. China

  • School of Civil and Environmental Engineering, Harbin Institute of Technology, Shenzhen, P. R. China

  • General Education Division, The Chinese University of Hong Kong, Shenzhen, P. R. China

  • Sections