| Peer-Reviewed

Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”

Received: 7 March 2022     Accepted: 26 April 2022     Published: 9 June 2022
Views:       Downloads:
Abstract

In this research, an automatic control system is projected, which guarantees the constant flow of cane to the first mill of the tandem in the Central Argeo Martínez from the province of Guantánamo in Cuba; in such a way that the efficiency of extracting juices during the grinding process is guaranteed. For this it was necessary to characterize the cane feeding systems, as well as the analysis of the current situation of the process in said plant. It also presents the architecture of the proposed control system, the selection of the control strategy, as well as the modeling and calculation of the power of the motors that the process demands. The different instruments used in the process were characterized. The FX3U-32M series Mitsubishi brand PLC was described. The economic impact of the proposal is expressed to the extent that greater efficiency is achieved in the cane juice extraction process, production and maintenance costs decrease, and energy savings are boosted, which represents economic savings for the industry. The proposal for the automatic control system does not present damage to the environment, as it does not cause noise or waste that affects human beings, and it does not depend on the use of polluting energies. This control system does not constitute a source of accidents for the people who operate or manipulate it.

Published in International Journal of Energy and Environmental Science (Volume 7, Issue 3)
DOI 10.11648/j.ijees.20220703.13
Page(s) 50-56
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Regulator, PSoC Microcontrollers, Hydroelectric Power Plants

References
[1] Basallo Triana, Yesid Fernando, “Optimization of the cane unloading system for the drivers of a sugar mill”, Autonomous University of the West, Faculty of Engineering, Santiago de Cali, Ecuador, (2006).
[2] González Pérez, F. "Operational control of some agroindustrial factors that affect cogeneration in sugar mills." Thesis in Option to the Scientific Degree of Doctor of Sciences, UCf, (2002).
[3] Ecuret, Available at: https://www.ecured.cu/Empresa_Azucarera:Guant%C3%A1namo, (2020).
[4] Perán González and others, “White Paper on Automatic Control in the Sugar Industry”, Chief Editor: José Ramón Perán González, CARTIF Foundation, Spain (2011).
[5] Hugot, E. “Handbook for Sugar Engineers” Part I Revolutionary Edition, Third Reprint (1998).
[6] Tamayo Bernal Arislian, Diploma Work, Topic: Design of an automation proposal for cane feeding in the “América Libre” sugar mill, Universidad de Oriente, Faculty of Electrical Engineering, Santiago de Cuba, Cuba (2014).
[7] Creus Sole, Antonio. “Industrial Instrumentation” 8th Edition, Alfaomega Grupo Editor, Barcelona, Spain, (2011).
[8] Robles James, “Principles of Measurement - Transmitters”, Huertas Junior College, Department of Instrumentation, Caguas, Puerto Rico, (2016).
[9] Tomás Martin M., “Industrial Communication Tutorial”, Bach in Electronic Engineering, Universidad Nacional Mayor de San Marcos, Lima, Peru, (2002).
[10] Emerson; Process Management-PlantWeb University, http://www.emersonprocess.com, November, (2019).
[11] Smar Brazil, http://www.profibus.com., May 2020.
[12] Medina Palta Johanna, Diploma Work, Topic: "Design of an automation system for a cane juice extraction process", National University of Loja, Loja, Ecuador, (2010).
[13] González Pérez, F. “Operational control of some agro-industrial factors that affect cogeneration in sugar mills”. Thesis in Option to the Scientific Degree of Doctor of Sciences, UCf, (2002).
[14] Dominguez, A., M. Ramirez, M. Angulo. “Simulation of level speed control in a cane mill feed hopper” Proceedings of the FIE08 International Conference. Santiago de Cuba. Cuba, July, (2008).
[15] Catalog of FERTRON brand products, Available at: http://www.fertron.com.br/docs/catalogo_produtos_espanhol.pdf&ved=2ahUKEwi76a6rzozqAhUmc98KHTuBBPEQFjABegQIAxAI&usg=AOvVaw1NMpzzqcZWoYsBfhn55PCF&cshid=15925261894203).
[16] PLC Catalog Available at: https://es3a.mitsubishielectric.com/fa/es/dl/1026/166963.pdf (2020).
Cite This Article
  • APA Style

    Magdelen Bazan De Los Santos, Angela Giralt Sanchez. (2022). Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”. International Journal of Energy and Environmental Science, 7(3), 50-56. https://doi.org/10.11648/j.ijees.20220703.13

    Copy | Download

    ACS Style

    Magdelen Bazan De Los Santos; Angela Giralt Sanchez. Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”. Int. J. Energy Environ. Sci. 2022, 7(3), 50-56. doi: 10.11648/j.ijees.20220703.13

    Copy | Download

    AMA Style

    Magdelen Bazan De Los Santos, Angela Giralt Sanchez. Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”. Int J Energy Environ Sci. 2022;7(3):50-56. doi: 10.11648/j.ijees.20220703.13

    Copy | Download

  • @article{10.11648/j.ijees.20220703.13,
      author = {Magdelen Bazan De Los Santos and Angela Giralt Sanchez},
      title = {Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”},
      journal = {International Journal of Energy and Environmental Science},
      volume = {7},
      number = {3},
      pages = {50-56},
      doi = {10.11648/j.ijees.20220703.13},
      url = {https://doi.org/10.11648/j.ijees.20220703.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijees.20220703.13},
      abstract = {In this research, an automatic control system is projected, which guarantees the constant flow of cane to the first mill of the tandem in the Central Argeo Martínez from the province of Guantánamo in Cuba; in such a way that the efficiency of extracting juices during the grinding process is guaranteed. For this it was necessary to characterize the cane feeding systems, as well as the analysis of the current situation of the process in said plant. It also presents the architecture of the proposed control system, the selection of the control strategy, as well as the modeling and calculation of the power of the motors that the process demands. The different instruments used in the process were characterized. The FX3U-32M series Mitsubishi brand PLC was described. The economic impact of the proposal is expressed to the extent that greater efficiency is achieved in the cane juice extraction process, production and maintenance costs decrease, and energy savings are boosted, which represents economic savings for the industry. The proposal for the automatic control system does not present damage to the environment, as it does not cause noise or waste that affects human beings, and it does not depend on the use of polluting energies. This control system does not constitute a source of accidents for the people who operate or manipulate it.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design of an Automatic Control System for Cane Feeding of the Tandem in the Central “Argeo Martínez”
    AU  - Magdelen Bazan De Los Santos
    AU  - Angela Giralt Sanchez
    Y1  - 2022/06/09
    PY  - 2022
    N1  - https://doi.org/10.11648/j.ijees.20220703.13
    DO  - 10.11648/j.ijees.20220703.13
    T2  - International Journal of Energy and Environmental Science
    JF  - International Journal of Energy and Environmental Science
    JO  - International Journal of Energy and Environmental Science
    SP  - 50
    EP  - 56
    PB  - Science Publishing Group
    SN  - 2578-9546
    UR  - https://doi.org/10.11648/j.ijees.20220703.13
    AB  - In this research, an automatic control system is projected, which guarantees the constant flow of cane to the first mill of the tandem in the Central Argeo Martínez from the province of Guantánamo in Cuba; in such a way that the efficiency of extracting juices during the grinding process is guaranteed. For this it was necessary to characterize the cane feeding systems, as well as the analysis of the current situation of the process in said plant. It also presents the architecture of the proposed control system, the selection of the control strategy, as well as the modeling and calculation of the power of the motors that the process demands. The different instruments used in the process were characterized. The FX3U-32M series Mitsubishi brand PLC was described. The economic impact of the proposal is expressed to the extent that greater efficiency is achieved in the cane juice extraction process, production and maintenance costs decrease, and energy savings are boosted, which represents economic savings for the industry. The proposal for the automatic control system does not present damage to the environment, as it does not cause noise or waste that affects human beings, and it does not depend on the use of polluting energies. This control system does not constitute a source of accidents for the people who operate or manipulate it.
    VL  - 7
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Automatic Engineering, Faculty of Electrical Engineering, Eastern University, Santiago de Cuba, Cuba

  • Department of Automatic Engineering, Faculty of Electrical Engineering, Eastern University, Santiago de Cuba, Cuba

  • Sections