There is a certain production and sales difference in the urban gas transmission and distribution system, which is composed of many factors. Part of the reason is that the gas meter takes the volume under standard conditions as the measurement unit, but the gas temperature and pressure in the meter change with the environment of the gas supply pipelines, resulting in the measurement error of the domestic gas meter without temperature and pressure compensation. By analyzing the change of annual gas temperature and local atmospheric pressure when outdoor courtyard pipelines are overhead and buried in a city, the influence of temperature and pressure change on gas volume is discussed by using gas state equation, the production and sales difference caused by metering error is calculated, and the corresponding correction coefficient is put forward, which is of certain significance to reduce the production and sales difference. It is concluded that when temperature of the gas is lower than 20°C, the measurement error of the gas meter is negative, which has caused the loss of the gas company. For domestic gas meters without temperature compensation, the product of measured gas consumption and temperature correction coefficient can be taken as the actual gas consumption to correct the measurement error of gas meters.
Published in | International Journal of Economy, Energy and Environment (Volume 6, Issue 5) |
DOI | 10.11648/j.ijeee.20210605.17 |
Page(s) | 118-123 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Volumetric Gas, Temperature, Pressure, Correction Factor, Measurement Error
[1] | The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration of the People's Republic of China. Natural gas standard reference conditions: GB/T 19205-2008 [S]. 2008. |
[2] | Wang Xingfang, Li Hengjing, and Yan Yijian. The influence of pressure and temperature in front of a natural gas stove on the supply-sale gap [J]. Gas and Heat, vol. 2007, 27 (10), pp. 46-49. |
[3] | Wu Yuanyuan, Wenming, Wei Yong. The influence of temperature and pressure compensation on the measurement error of natural gas residents [J]. Gas and Heat, vol. 2016, 36 (7), pp. B17-B21. |
[4] | Yan Congjie. Comparing two methods for evaluating the uncertainty of the indicated value error of membrane gas and discussing the role of sensitivity coefficient in uncertainty evaluation [J]. Measurement and testing technology, vol. 2021, 48 (4), pp. 109-112. |
[5] | Ma Shiren, Feng Zhigang. Measurement performance test of temperature compensated membrane gas meter [J]. China standardization, vol. 2021 (10), pp. 166-168 + 172. |
[6] | Jiang Hangcheng, Guo Gang, Lin Mingxing. Automatic calibration technology of intelligent membrane gas meter [J]. Gas and heat, vol. 2020, 40 (12), pp. 26-30 + 46. |
[7] | Zhao Yumei. Study on rapid error verification method of membrane gas meter [J]. Instrument standardization and measurement, vol. 2018 (2), pp. 35-37. |
[8] | Wang Lin. Research on Accurate Measurement Method of Gas Consumption for Catering Commercial Users (Master's Thesis) [D]. Harbin: Harbin Institute of Technology, 2017, pp. 11-15. |
[9] | Editor-in-Chief of the Ministry of Construction of the People's Republic of China. Urban Gas Design Code [S]. Beijing: China Construction Industry Press, 2006, pp. 394. |
[10] | Hai Chunxing. Chen Jianfei. Soil Geography [M]. Second edition. Beijing: Science Press, 2016, pp. 49. |
[11] | Li Chaohui, Dai Jingmin, Li Chengwei, etc. Discussion on the correction of compression factor in gas flow measurement [J]. Natural Gas Industry, vol. 2004, 24 (10), pp. 124-127. |
[12] | Liang Yongzeng. Technical analysis of electronic temperature and pressure correction membrane gas meter [J]. Gas and Heat, vol. 2019, 39 (11), pp. 33-36+46. |
[13] | Wang Haifang, Yu Hang, Li Shuwang, Yao Haiyu, Zhang Yaling, Wang Changlin, Wang Jian, Gao Zhu. Temperature and pressure compensation of diaphragm gas meter [J]. Gas and Heat, vol. 2012, 32 (01), pp. 63-65 + 81. |
[14] | Wang Xiuqiao, Li Hongjun, Zhao Xiaojun, Fang Jiong, Hu Liangchuan. Technical Research on Intelligent Ultrasonic Gas Meter [J]. Gas and Heat, vol. 2017, 37 (08), pp. 26-28. |
[15] | Yang Youtao, Peng Lei, Wang Zhen, Chen Shiyan. Theoretical basis and application of electronic temperature and pressure correction membrane gas meter [J]. Urban gas, vol. 2021 (02), pp. 1-4. |
[16] | Sun Junfang, Chen Tingting, Wang Xun, Chai Jiafeng, Tian Silu. Safety and metering performance analysis of civil membrane gas meters in use [J]. Modern occupational safety, vol. 2021 (08), pp. 89-92. |
APA Style
Yin Xiao, Tian Guansan, Zhang Wenhao. (2021). Measurement Error Analysis of Volumetric Gas Meter Without Temperature Compensation. International Journal of Economy, Energy and Environment, 6(5), 118-123. https://doi.org/10.11648/j.ijeee.20210605.17
ACS Style
Yin Xiao; Tian Guansan; Zhang Wenhao. Measurement Error Analysis of Volumetric Gas Meter Without Temperature Compensation. Int. J. Econ. Energy Environ. 2021, 6(5), 118-123. doi: 10.11648/j.ijeee.20210605.17
AMA Style
Yin Xiao, Tian Guansan, Zhang Wenhao. Measurement Error Analysis of Volumetric Gas Meter Without Temperature Compensation. Int J Econ Energy Environ. 2021;6(5):118-123. doi: 10.11648/j.ijeee.20210605.17
@article{10.11648/j.ijeee.20210605.17, author = {Yin Xiao and Tian Guansan and Zhang Wenhao}, title = {Measurement Error Analysis of Volumetric Gas Meter Without Temperature Compensation}, journal = {International Journal of Economy, Energy and Environment}, volume = {6}, number = {5}, pages = {118-123}, doi = {10.11648/j.ijeee.20210605.17}, url = {https://doi.org/10.11648/j.ijeee.20210605.17}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijeee.20210605.17}, abstract = {There is a certain production and sales difference in the urban gas transmission and distribution system, which is composed of many factors. Part of the reason is that the gas meter takes the volume under standard conditions as the measurement unit, but the gas temperature and pressure in the meter change with the environment of the gas supply pipelines, resulting in the measurement error of the domestic gas meter without temperature and pressure compensation. By analyzing the change of annual gas temperature and local atmospheric pressure when outdoor courtyard pipelines are overhead and buried in a city, the influence of temperature and pressure change on gas volume is discussed by using gas state equation, the production and sales difference caused by metering error is calculated, and the corresponding correction coefficient is put forward, which is of certain significance to reduce the production and sales difference. It is concluded that when temperature of the gas is lower than 20°C, the measurement error of the gas meter is negative, which has caused the loss of the gas company. For domestic gas meters without temperature compensation, the product of measured gas consumption and temperature correction coefficient can be taken as the actual gas consumption to correct the measurement error of gas meters.}, year = {2021} }
TY - JOUR T1 - Measurement Error Analysis of Volumetric Gas Meter Without Temperature Compensation AU - Yin Xiao AU - Tian Guansan AU - Zhang Wenhao Y1 - 2021/10/19 PY - 2021 N1 - https://doi.org/10.11648/j.ijeee.20210605.17 DO - 10.11648/j.ijeee.20210605.17 T2 - International Journal of Economy, Energy and Environment JF - International Journal of Economy, Energy and Environment JO - International Journal of Economy, Energy and Environment SP - 118 EP - 123 PB - Science Publishing Group SN - 2575-5021 UR - https://doi.org/10.11648/j.ijeee.20210605.17 AB - There is a certain production and sales difference in the urban gas transmission and distribution system, which is composed of many factors. Part of the reason is that the gas meter takes the volume under standard conditions as the measurement unit, but the gas temperature and pressure in the meter change with the environment of the gas supply pipelines, resulting in the measurement error of the domestic gas meter without temperature and pressure compensation. By analyzing the change of annual gas temperature and local atmospheric pressure when outdoor courtyard pipelines are overhead and buried in a city, the influence of temperature and pressure change on gas volume is discussed by using gas state equation, the production and sales difference caused by metering error is calculated, and the corresponding correction coefficient is put forward, which is of certain significance to reduce the production and sales difference. It is concluded that when temperature of the gas is lower than 20°C, the measurement error of the gas meter is negative, which has caused the loss of the gas company. For domestic gas meters without temperature compensation, the product of measured gas consumption and temperature correction coefficient can be taken as the actual gas consumption to correct the measurement error of gas meters. VL - 6 IS - 5 ER -