Transformers are the key equipment in electrical power transmission. So the use of transformers protection in electric power systems is very crucial and critical as they are required for efficient transportation of electricity to consumers for long term. This paper is concerned with the differential current protection scheme of transformer using a differential relay technique with arduino Uno microcontroller as a differential relay responsible for comparing the differential current values and sends trip signal to the relay (acting as circuit breaker) to open the circuit when there is fault in the protected zone as a result of imbalance in the differential current values. The system is efficient in transformer protection, gives better isolation, has accurate fault detection and quick response time to clearing faults
Published in | International Journal on Data Science and Technology (Volume 5, Issue 1) |
DOI | 10.11648/j.ijdst.20190501.15 |
Page(s) | 35-39 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2019. Published by Science Publishing Group |
Transformers, Differential Current Protection, Arduino Uno Microcontroller, Relays, Current Transformers
[1] | K. Salunke, S. Sheikh, S. B Kunure (2016). “Transformer protection using microcontroller based relay and monitoring using GSM technology” International engineering research journal (IERJ), Vol. 2 issue 2, page 813-817, 2016, ISSN 2395 -1621. |
[2] | Adel, A. & Rahman, M. A. (2011). “A Software Design Technique for Differential Protection of Transformers”, International Electric Machines & Drives Conference (IEMDC), IEEE. |
[3] | Sarfaraz, N. S., Radica S. & Sandy M. N. R. (2015). “Digital Protection of Transformer using Arduino with Voice Alert”, International Journal of Innovations in Engineering and Technology (IJIET), Vol. 6, Issue 2. |
[4] | Ochieng’, A. O. (2015). “Microcontroller based power transformer protection”. |
[5] | S. M. Bashi, N. Marium and Rafa (2007). “Power Transformer Protection using Microcvontroller Based Relay.”, Journal of Applied Science 7 (12): 1602-1607, 2007. ISSN 1812-5654. |
[6] | Electric4u.com. (2018, August 27). https: //www.electrical4u.com/magnetizing-inrush-current-in-power-transformer/. Retrieved from www.electric4u.com: https: //www.electrical4u.com/magnetizing-inrush-current-in-power-transformer/. |
[7] | P. Afzal, P. Jigar, T. Raj, K. Abhishek, K Bariya. (2017). “Differential Current Protection of Transformer Using Arduino with Voice Alert” International Journal of Advance Engineering and Research Development (IJARED), P-ISSN; 2348-6406. |
[8] | V. Kumar, k. Vivek, V. Verma, (2015) “A Microcontroller Based Online Fault Detection System” IJEE, VOL 7 page 1-4, 2015, ISSN 0973-7383. |
[9] | S. M. Bashi (2007). “Power Transformer Protection using Microcvontroller Based Relay.”, Journal of Applied Science 7 (12): 1602-1607, 2007. ISSN 1812-5654. |
[10] | V. Kumar (2015) “A Microcontroller Based Online Fault Detection System” IJEE, VOL 7 page 1-4, 2015, ISSN 0973-7383. |
[11] | Adel, A. (2011). “A Software Design Technique for Differential Protection of Transformers”, International Electric Machines & Drives Conference (IEMDC), IEEE. |
[12] | P. Afzal, P. Jigar, T. Raj, K. Abhishek, K Bariya. (2017). “Differential Current Protection of Transformer Using Arduino with Voice Alert” International Journal of Advance Engineering and Research Development (IJARED), P-ISSN; 2348-6406. |
[13] | Sarfaraz, N. S., (2015). “Digital Protection of Transformer using Arduino with Voice Alert”, International Journal of Innovations in Engineering and Technology (IJIET), Vol. 6, Issue 2. |
[14] | Electric4u.com. (2018, August 29). https://www.electrical4u.com/magnetizing-inrush-current-in-power-transformer/. Retrieved from www.electric4u.com: https: //www.electrical4u.com/magnetizing-inrush-current-in-power-transformer/. |
[15] | K.Salunke, (2016).”Transformer protection using microcontroller based relay and monitoring using GSM technology” International engineering research journal (IERJ), Vol. 2 issue 2, page 813-817, 2016, ISSN 2395 -1621. |
APA Style
Emmanuel Ighodalo Okhueleigbe, Joseph Ailenokhuoria Ogbekhiule. (2019). Digital Differential Current Protection Scheme of Transformer Using an Arduino UNO Microcontroller. International Journal on Data Science and Technology, 5(1), 35-39. https://doi.org/10.11648/j.ijdst.20190501.15
ACS Style
Emmanuel Ighodalo Okhueleigbe; Joseph Ailenokhuoria Ogbekhiule. Digital Differential Current Protection Scheme of Transformer Using an Arduino UNO Microcontroller. Int. J. Data Sci. Technol. 2019, 5(1), 35-39. doi: 10.11648/j.ijdst.20190501.15
AMA Style
Emmanuel Ighodalo Okhueleigbe, Joseph Ailenokhuoria Ogbekhiule. Digital Differential Current Protection Scheme of Transformer Using an Arduino UNO Microcontroller. Int J Data Sci Technol. 2019;5(1):35-39. doi: 10.11648/j.ijdst.20190501.15
@article{10.11648/j.ijdst.20190501.15, author = {Emmanuel Ighodalo Okhueleigbe and Joseph Ailenokhuoria Ogbekhiule}, title = {Digital Differential Current Protection Scheme of Transformer Using an Arduino UNO Microcontroller}, journal = {International Journal on Data Science and Technology}, volume = {5}, number = {1}, pages = {35-39}, doi = {10.11648/j.ijdst.20190501.15}, url = {https://doi.org/10.11648/j.ijdst.20190501.15}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijdst.20190501.15}, abstract = {Transformers are the key equipment in electrical power transmission. So the use of transformers protection in electric power systems is very crucial and critical as they are required for efficient transportation of electricity to consumers for long term. This paper is concerned with the differential current protection scheme of transformer using a differential relay technique with arduino Uno microcontroller as a differential relay responsible for comparing the differential current values and sends trip signal to the relay (acting as circuit breaker) to open the circuit when there is fault in the protected zone as a result of imbalance in the differential current values. The system is efficient in transformer protection, gives better isolation, has accurate fault detection and quick response time to clearing faults}, year = {2019} }
TY - JOUR T1 - Digital Differential Current Protection Scheme of Transformer Using an Arduino UNO Microcontroller AU - Emmanuel Ighodalo Okhueleigbe AU - Joseph Ailenokhuoria Ogbekhiule Y1 - 2019/06/04 PY - 2019 N1 - https://doi.org/10.11648/j.ijdst.20190501.15 DO - 10.11648/j.ijdst.20190501.15 T2 - International Journal on Data Science and Technology JF - International Journal on Data Science and Technology JO - International Journal on Data Science and Technology SP - 35 EP - 39 PB - Science Publishing Group SN - 2472-2235 UR - https://doi.org/10.11648/j.ijdst.20190501.15 AB - Transformers are the key equipment in electrical power transmission. So the use of transformers protection in electric power systems is very crucial and critical as they are required for efficient transportation of electricity to consumers for long term. This paper is concerned with the differential current protection scheme of transformer using a differential relay technique with arduino Uno microcontroller as a differential relay responsible for comparing the differential current values and sends trip signal to the relay (acting as circuit breaker) to open the circuit when there is fault in the protected zone as a result of imbalance in the differential current values. The system is efficient in transformer protection, gives better isolation, has accurate fault detection and quick response time to clearing faults VL - 5 IS - 1 ER -