In this paper, concentrate on scheduling sensors between sleep and active modes to maximize network life time while maintaining target coverage and consuming minimum energy. In this work, we try to develop an Energy Aware Target Coverage Protocol in which we have considered that if a target is with in the receiving / transmitting range of two or more sensors nodes, then only one of the sensor node may be initiated to cover the specific target while the other sensor nodes of that receiving / transmitting range may not require to participate, which help to minimize participation of sensor nodes to cover the specific targets, there by consuming minimum energy. Our result analysis brings a considerable amount of energy saving without affecting the coverage problem.
Published in | International Journal on Data Science and Technology (Volume 2, Issue 2) |
DOI | 10.11648/j.ijdst.20160202.12 |
Page(s) | 26-30 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2016. Published by Science Publishing Group |
Wireless Sensor Network, Target Coverage, Energy Aware Protocols, Sensor Nodes
[1] | A. Cerpa, J. Elson, D. Estrin, L. Girod, M. Hamilton, and J. Zhao. Habitat monitoring: Application driver for wireless communications technology. In Proceedings of the 2001 ACM SIGCOMM Workshop on Data Communications in Latin Americaand the Caribbean. |
[2] | Alan Main waring, Joseph Polastre, Robert Szewczyk, David Culler, and John Anderson. Wireless sensor networks for habitat monitoring. In ACM International Workshop on Wireless Sensor Network and Applications (WSNA'02), Atlanta, GA, September 2002. |
[3] | Edoardo Biagioni and Kent Bridges. The application of remotes technology to assist the recovery of rareandend angered species. In Special issue on Distributed Sensor Networks for the International Journal of High Performance Computing Applications, Vol. 16, N. 3, August 2002. |
[4] | Loren Schwiebert, Sandeep K. S. Gupta, and Jennifer Weinmann. Research challenges in wireless networks of biomedical sensors. In Mobile Computing and Networking, pages 151-165, 2001. |
[5] | Mani B. Srivastava, Richard R. Munt z, and Miodrag Potkonjak. Smart kindergarten: sensor based wireless networks for smart developmental problem-solving environments. In Mobile Computing and Networking, pages 132-138, 2001. |
[6] | I. F. Akyildiz, W. Su, Y. Sankara subramaniam, E. Cayirci, "Wireless Sensor Networks: A Survey", Elsevier Computer Networks, vol. 38, no. 4, pages 393-422, Mar. 2002. |
[7] | H. Zhang and J. C. Hou, “Maintaining sensing coverage and connectivity in large sensor networks,” in NSF International Workshop on Theoretical and Algorithmic Aspects of Sensor, AdHoc Wireless, and Peer-to-Peer Networks, February 2004, pp. 251–262. |
[8] | Jie Chen and Xeno fon Koutsoukos, "Survey on Coverage Problems in Wireless AdHoc Sensor Networks", IEEE South East Con 2007. Richmond, VA, March 22-25, 2007. |
[9] | Purnima Khuntia, P. K. Pattnaik, "Coverage Issue of Wireless Sensor Network", on National Conference RTCT-11, pp-: 17-18. |
[10] | Purnima Khuntia and Prasant Kumar Pattnaik, “Some Target Coverage Issues of Wireless Sensor Network”, On International Journal of Instrumentation, Control and Automation (IJICA), Volume-1, Issue-1, 2011, pp: 96-98. |
APA Style
Priyanka Pandey, Raghvendra Kumar, Prasant Kumar Pattnaik. (2016). Energy Aware Target Coverage Protocol for WSN. International Journal on Data Science and Technology, 2(2), 26-30. https://doi.org/10.11648/j.ijdst.20160202.12
ACS Style
Priyanka Pandey; Raghvendra Kumar; Prasant Kumar Pattnaik. Energy Aware Target Coverage Protocol for WSN. Int. J. Data Sci. Technol. 2016, 2(2), 26-30. doi: 10.11648/j.ijdst.20160202.12
AMA Style
Priyanka Pandey, Raghvendra Kumar, Prasant Kumar Pattnaik. Energy Aware Target Coverage Protocol for WSN. Int J Data Sci Technol. 2016;2(2):26-30. doi: 10.11648/j.ijdst.20160202.12
@article{10.11648/j.ijdst.20160202.12, author = {Priyanka Pandey and Raghvendra Kumar and Prasant Kumar Pattnaik}, title = {Energy Aware Target Coverage Protocol for WSN}, journal = {International Journal on Data Science and Technology}, volume = {2}, number = {2}, pages = {26-30}, doi = {10.11648/j.ijdst.20160202.12}, url = {https://doi.org/10.11648/j.ijdst.20160202.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijdst.20160202.12}, abstract = {In this paper, concentrate on scheduling sensors between sleep and active modes to maximize network life time while maintaining target coverage and consuming minimum energy. In this work, we try to develop an Energy Aware Target Coverage Protocol in which we have considered that if a target is with in the receiving / transmitting range of two or more sensors nodes, then only one of the sensor node may be initiated to cover the specific target while the other sensor nodes of that receiving / transmitting range may not require to participate, which help to minimize participation of sensor nodes to cover the specific targets, there by consuming minimum energy. Our result analysis brings a considerable amount of energy saving without affecting the coverage problem.}, year = {2016} }
TY - JOUR T1 - Energy Aware Target Coverage Protocol for WSN AU - Priyanka Pandey AU - Raghvendra Kumar AU - Prasant Kumar Pattnaik Y1 - 2016/02/19 PY - 2016 N1 - https://doi.org/10.11648/j.ijdst.20160202.12 DO - 10.11648/j.ijdst.20160202.12 T2 - International Journal on Data Science and Technology JF - International Journal on Data Science and Technology JO - International Journal on Data Science and Technology SP - 26 EP - 30 PB - Science Publishing Group SN - 2472-2235 UR - https://doi.org/10.11648/j.ijdst.20160202.12 AB - In this paper, concentrate on scheduling sensors between sleep and active modes to maximize network life time while maintaining target coverage and consuming minimum energy. In this work, we try to develop an Energy Aware Target Coverage Protocol in which we have considered that if a target is with in the receiving / transmitting range of two or more sensors nodes, then only one of the sensor node may be initiated to cover the specific target while the other sensor nodes of that receiving / transmitting range may not require to participate, which help to minimize participation of sensor nodes to cover the specific targets, there by consuming minimum energy. Our result analysis brings a considerable amount of energy saving without affecting the coverage problem. VL - 2 IS - 2 ER -