Potassium feldspar is one of the basic needs of glass, ceramic, electrical insulation and other industries. One of the challenging factors in feldspar processing industries is the presence of iron and silica in feldspar. In order to increase the quality of feldspar concentrate for use in related industries, flotation is one of the most common methods of reduce iron and silicon content in feldspar. Therefore, in this study, the ore was crushed for 15 minutes to reduce the particle size below 150 microns. Then the mineralogical and chemical composition of the crushed product were determined by conventional XRF and XRD methods. Based on the mineralogical and chemical composition of the crushed product, different flotation scenarios were designed to reduce the iron and silica content in feldspar were investigated. The amount of silica and iron in the samples used in this study were 73.31 and 0.31%, respectively. In the first stage, in order to reduce iron, reverse flotation experiments were performed. In reverse flotation experiments, using a combination of 800 g/ton of each of the two collectors Aero 801 and 845 with 100 g/ton of pine oil frother at a pH of 2.5-2.9, the iron content to a level of 0.11%, Decreased. Also, to reduce silica content up to 57.26%, 400 g/ton of fluoric acid detector with 200 g/ton methyl isobutyl carbinol (MIBC) frother was obtained at pH 2.8-3. Feldspar with this percentage of impurities is suitable for use in required industries such as ceramic and tile.
| Published in | Engineering Science (Volume 7, Issue 2) |
| DOI | 10.11648/j.es.20220702.12 |
| Page(s) | 33-38 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Feldspar, Silica, Iron, Chemical Reagents, Flotation
| [1] | United State Environmental Protection Agency (EPA), Feldspar Processing, AP 42, Fifth Edition, Vo. I Ch. 11: Mineral Products Industry, 1993. |
| [2] | Ariffin, K. Sh., Feldspathic Minerals, EBS 425/3- Mineral Perindustrian, 2003. |
| [3] | Harrison, A. D., Whale, T. F., Carpenter, M. A., Holden, M. A., Neve, L., O'Sullivan, D., Vergara Temprado, J. and Murray, B. J., Not all feldspars are equal: a survey of ice nucleating properties across the feldspar group of minerals, Atmospheric Chemistry and Physics, 2016, vol. 16, no. 17, pp. 10927-10940. https://doi.org/10.5194/acp-16-10927-2016 |
| [4] | Waleed, R. A., Concentrating of Feldspar from Al-Samawa Sand Dune, J. Eng. Sus. Dev., 2018, vol. 22, no. 4, pp. 202-210. https://doi.org/10.31272/jeasd.2018.4.15 |
| [5] | Gaied, M. E. and Gallala, W., Beneficiation of feldspar ore for application in the ceramic industry: Influence of composition on the physical characteristics, Arabian Journal of Chemistry, 2015, vol. 8, pp. 186–190. |
| [6] | Ciullo, P. A., The industrial mineral, Industrial Minerals and Their Use, USA, Noyes Publications, Ch. 2, p. 32, 1996. |
| [7] | Ahmed M. M., Ibrahim G. A., Rizk A. M. E. and Mahmoud N. A., Reduce the Iron Content in Egyptian Feldspar Ore of Wadi Zirib for Industrial Applications, International Journal of Mining Engineering and Mineral Processing, 2016, vol. 5, no. 2, pp. 25-34. doi: 10.5923/j.mining.20160502.01. |
| [8] | Heyes, G. W., Allan, G. C., Bruckard, W. J. and Sparrow, G. J., Review of flotation of feldspar, Mineral Processing and Extractive Metallurgy, 2012, vol. 121, no. 2, pp. 72-78. |
| [9] | Chatterjee, K. K., Feldspar, Uses of Industrial Minerals, Rock and Freshwater, New York, Nova Science Publishers, Inc1, Ch. 21, pp. 167-174, 2009. |
| [10] | Amaireh, M. and Aljaradin, M., Characterization of the Jordanian Feldspar Raw Materials for Application in the Ceramic and Glass Industries, International Journal of Mining Engineering and Mineral Processing, 2014, vol. 3, no. 2, pp. 28-31. |
| [11] | Silva, A. C., Carolinab, S. D., Sousac, D. N. and Silvad, E. M. S., Feldspar production from dimension stone tailings for application in the ceramic industry, Journal of Materials Research and Technology (jmr&t), 2019, vol. 8, no. 1, pp. 1–7. https://doi.org/10.1016/j.jmrt.2018.02.011 |
| [12] | Karagüzel, C. and Cobanoglu, G., Stage-wise flotation for the removal of colored minerals from feldspathic slimes using laboratory scale Jameson cell, Separation and Purification Technology, 2010, vol. 74, no. 1, pp. 100-107. |
| [13] | Burat F., Kokkilic O., Kangal O., Gurkan V. and Celik M. S., Quartz-feldspar separation for the glass and ceramics industries, Minerals & Metallurgical Processing, 2007; vol. 24, no. 2, pp. 75-80. |
| [14] | Hacifazlioglu, H., kursun, I. and Terzi, M., Beneficiation of low- grade feldspar ore using cyclojet flotation cell, conventional cell and magnetic separator, Physicochemical Problems of Mineral Processing, 2012, vol. 48, no. 2, pp. 381−392. |
| [15] | Bayat, O., Arslan, V., and Cebeci, Y., Combined application of different collectors in the floatation concentration of Turkish feldspars, Minerals Engineering, 2006, vol. 19, no. 1, pp. 98-101. https://doi.org/10.1016/j.mineng.2005.06.015 |
| [16] | Luo, B., Zho, Y., Sun, Ch., Li, Y. and Han, Y., Flotation and adsorption of a new collector α-Bromodecanoic acid on quartz surface, Minerals Engineering, 2015, vol. 77, pp. 86-92. https://doi.org/10.1016/j.mineng.2015.03.003 |
| [17] | Vidyadhar A. and Hanumantha R. K., Adsorption mechanism of mixed cationic/anionic collectors in feldspar-quartz flotation system, Colloid and Interface Science, 2006, vol. 306, no. 2, pp. 195-204. Doi: 10.1016/j.jcis.2006.10.047. |
| [18] | Orhan, E. C. and Bayraktar, I., Amine–oleate interactions in feldspar flotation, Minerals Engineering, 2006, vol. 19, pp. 48-55. |
| [19] | Wang, W., Cong J., Deng, J., Weng, X., Lin, Y., Huang, Y., and Peng, T., Developing Effective Separation of Feldspar and Quartz While Recycling Tailwater by HF Pretreatment, Minerals, 2018, vol. 8, pp. 149-164. Doi: 10.3390/min8040149. |
APA Style
Ali Noorbakhsh, Mohammad Bagher Eslami Andargoli. (2022). The Laboratory Investigations of Reducing Iron and Silica Content of Potassium Feldspar Ore by Flotation. Engineering Science, 7(2), 33-38. https://doi.org/10.11648/j.es.20220702.12
ACS Style
Ali Noorbakhsh; Mohammad Bagher Eslami Andargoli. The Laboratory Investigations of Reducing Iron and Silica Content of Potassium Feldspar Ore by Flotation. Eng. Sci. 2022, 7(2), 33-38. doi: 10.11648/j.es.20220702.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.es.20220702.12,
author = {Ali Noorbakhsh and Mohammad Bagher Eslami Andargoli},
title = {The Laboratory Investigations of Reducing Iron and Silica Content of Potassium Feldspar Ore by Flotation},
journal = {Engineering Science},
volume = {7},
number = {2},
pages = {33-38},
doi = {10.11648/j.es.20220702.12},
url = {https://doi.org/10.11648/j.es.20220702.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.es.20220702.12},
abstract = {Potassium feldspar is one of the basic needs of glass, ceramic, electrical insulation and other industries. One of the challenging factors in feldspar processing industries is the presence of iron and silica in feldspar. In order to increase the quality of feldspar concentrate for use in related industries, flotation is one of the most common methods of reduce iron and silicon content in feldspar. Therefore, in this study, the ore was crushed for 15 minutes to reduce the particle size below 150 microns. Then the mineralogical and chemical composition of the crushed product were determined by conventional XRF and XRD methods. Based on the mineralogical and chemical composition of the crushed product, different flotation scenarios were designed to reduce the iron and silica content in feldspar were investigated. The amount of silica and iron in the samples used in this study were 73.31 and 0.31%, respectively. In the first stage, in order to reduce iron, reverse flotation experiments were performed. In reverse flotation experiments, using a combination of 800 g/ton of each of the two collectors Aero 801 and 845 with 100 g/ton of pine oil frother at a pH of 2.5-2.9, the iron content to a level of 0.11%, Decreased. Also, to reduce silica content up to 57.26%, 400 g/ton of fluoric acid detector with 200 g/ton methyl isobutyl carbinol (MIBC) frother was obtained at pH 2.8-3. Feldspar with this percentage of impurities is suitable for use in required industries such as ceramic and tile.},
year = {2022}
}
TY - JOUR T1 - The Laboratory Investigations of Reducing Iron and Silica Content of Potassium Feldspar Ore by Flotation AU - Ali Noorbakhsh AU - Mohammad Bagher Eslami Andargoli Y1 - 2022/04/29 PY - 2022 N1 - https://doi.org/10.11648/j.es.20220702.12 DO - 10.11648/j.es.20220702.12 T2 - Engineering Science JF - Engineering Science JO - Engineering Science SP - 33 EP - 38 PB - Science Publishing Group SN - 2578-9279 UR - https://doi.org/10.11648/j.es.20220702.12 AB - Potassium feldspar is one of the basic needs of glass, ceramic, electrical insulation and other industries. One of the challenging factors in feldspar processing industries is the presence of iron and silica in feldspar. In order to increase the quality of feldspar concentrate for use in related industries, flotation is one of the most common methods of reduce iron and silicon content in feldspar. Therefore, in this study, the ore was crushed for 15 minutes to reduce the particle size below 150 microns. Then the mineralogical and chemical composition of the crushed product were determined by conventional XRF and XRD methods. Based on the mineralogical and chemical composition of the crushed product, different flotation scenarios were designed to reduce the iron and silica content in feldspar were investigated. The amount of silica and iron in the samples used in this study were 73.31 and 0.31%, respectively. In the first stage, in order to reduce iron, reverse flotation experiments were performed. In reverse flotation experiments, using a combination of 800 g/ton of each of the two collectors Aero 801 and 845 with 100 g/ton of pine oil frother at a pH of 2.5-2.9, the iron content to a level of 0.11%, Decreased. Also, to reduce silica content up to 57.26%, 400 g/ton of fluoric acid detector with 200 g/ton methyl isobutyl carbinol (MIBC) frother was obtained at pH 2.8-3. Feldspar with this percentage of impurities is suitable for use in required industries such as ceramic and tile. VL - 7 IS - 2 ER -
Information
Email: