Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall

Fenghui Li; Chao Xie; Zhiyan Che

doi:doi:10.11648/j.eas.20180305.11

| Peer-Reviewed

Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall

Fenghui Li, Chao Xie, Zhiyan Che

Published in Engineering and Applied Sciences (Volume 3, Issue 5)

Received: 7 September 2018 Accepted: 25 October 2018 Published: 26 November 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

With the development of curtain wall technology, along with the demand of artistic expression of architecture of curtain wall in China, some complex three-dimensional space shapes are increasingly used to the exterior of building. Among them, the construction of complex architecture formed by stone curtain wall system is extremely difficult. Currently, back-latching and hanging are the two most commonly used stone panel installation forms. The stone panel is a multi-point force bearing structure and the panel thickness of general stone curtain wall is about 30mm. In order to achieve architecture space shaping, on the one hand, stone panel thickness needs to be added at structural design. As the curtain wall dead weight is increased and the processing technology is more complex, the system safety and practicability can hardly be both considered. On the other hand, during installation on site, installation of stone panel for architectural shaping curtain wall is very difficult to control in terms of precision and the final installation quality and overall effect will be affected. In order to realize the architect’s bold conceiving on the stone shaping of the commercial annex building of Chengdu Yintai Center, this project adopts a stone curtain wall system simply supported on four sides, greatly improving the mechanical properties of stone panel under the same condition. The lock block fastening method assures the installation precision. The construction tasks are completed highly efficiently with high quality, perfectly showing the unique visual effect of the stone curtain wall.

Published in	Engineering and Applied Sciences (Volume 3, Issue 5)
DOI	10.11648/j.eas.20180305.11
Page(s)	121-128
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Simply-Supported Hidden Frame Stone, Composite Stone, Large Slab Stone, Profiled SlaB Stone Curtain Wall, Three-Dimensional Modeling Analysis, Computer Space Positioning

References

[1]	Fan Li. Study on the advantage of dry hanging method for back bolt type stone curtain wall [D]. Chang'an University, 2011.
[2]	Bing Zeng. Application research progress of dry hanging stone curtain wall system [J]. Adhesion, 2016(10):53-56.
[3]	Xuwang Cui, Research on construction technology of ultra-thin stone thermal insulation integrated exterior wall decorative panels [J]. Building Construction, 2015(8):951-952.
[4]	Lei Zhang. Installation technology of complex special-shaped stone curtain wall in a project [J]. Construction Technology, 2013, 42(14):43-46.
[5]	Xiajun Zhang. Construction technology of special-shaped curved stone curtain wall in YinChuan Railway Station [J]. Construction Technology, 2011, 40(22):24-26.
[6]	GB/T21086-2007, Building curtain wall [S].
[7]	GB/T3880.2-2012, General industrial aluminum and aluminum alloy plates second parts: mechanical properties [S].
[8]	JC/T887-2001, Epoxy adhesive for dry hanging stone curtain wall [S].
[9]	GB50009-2012, Load code for the design of building structures [S].
[10]	GB/T18250-2000, Detection method for in-plane deformation performance of building curtain wall [S].
[11]	GB/T14682-2006, Terminology of building sealed materials [S].
[12]	JGJ/T216-2010, Construction specification for aluminum alloy structural engineering [S].
[13]	JG/T216-2008, Small unit building curtain wall [S].
[14]	JGJ133-2001, Technical specification of metal and stone curtain wall engineering [S].
[15]	GB50210-2018, Quality acceptance standard for Building Decoration Engineering [S].

Cite This Article

Plain Text BibTeX RIS

APA Style

Fenghui Li, Chao Xie, Zhiyan Che. (2018). Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Engineering and Applied Sciences, 3(5), 121-128. https://doi.org/10.11648/j.eas.20180305.11

Copy | Download

ACS Style

Fenghui Li; Chao Xie; Zhiyan Che. Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Eng. Appl. Sci. 2018, 3(5), 121-128. doi: 10.11648/j.eas.20180305.11

Copy | Download

AMA Style

Fenghui Li, Chao Xie, Zhiyan Che. Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Eng Appl Sci. 2018;3(5):121-128. doi: 10.11648/j.eas.20180305.11

Copy | Download

@article{10.11648/j.eas.20180305.11,
  author = {Fenghui Li and Chao Xie and Zhiyan Che},
  title = {Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall},
  journal = {Engineering and Applied Sciences},
  volume = {3},
  number = {5},
  pages = {121-128},
  doi = {10.11648/j.eas.20180305.11},
  url = {https://doi.org/10.11648/j.eas.20180305.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.eas.20180305.11},
  abstract = {With the development of curtain wall technology, along with the demand of artistic expression of architecture of curtain wall in China, some complex three-dimensional space shapes are increasingly used to the exterior of building. Among them, the construction of complex architecture formed by stone curtain wall system is extremely difficult. Currently, back-latching and hanging are the two most commonly used stone panel installation forms. The stone panel is a multi-point force bearing structure and the panel thickness of general stone curtain wall is about 30mm. In order to achieve architecture space shaping, on the one hand, stone panel thickness needs to be added at structural design. As the curtain wall dead weight is increased and the processing technology is more complex, the system safety and practicability can hardly be both considered. On the other hand, during installation on site, installation of stone panel for architectural shaping curtain wall is very difficult to control in terms of precision and the final installation quality and overall effect will be affected. In order to realize the architect’s bold conceiving on the stone shaping of the commercial annex building of Chengdu Yintai Center, this project adopts a stone curtain wall system simply supported on four sides, greatly improving the mechanical properties of stone panel under the same condition. The lock block fastening method assures the installation precision. The construction tasks are completed highly efficiently with high quality, perfectly showing the unique visual effect of the stone curtain wall.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall
AU  - Fenghui Li
AU  - Chao Xie
AU  - Zhiyan Che
Y1  - 2018/11/26
PY  - 2018
N1  - https://doi.org/10.11648/j.eas.20180305.11
DO  - 10.11648/j.eas.20180305.11
T2  - Engineering and Applied Sciences
JF  - Engineering and Applied Sciences
JO  - Engineering and Applied Sciences
SP  - 121
EP  - 128
PB  - Science Publishing Group
SN  - 2575-1468
UR  - https://doi.org/10.11648/j.eas.20180305.11
AB  - With the development of curtain wall technology, along with the demand of artistic expression of architecture of curtain wall in China, some complex three-dimensional space shapes are increasingly used to the exterior of building. Among them, the construction of complex architecture formed by stone curtain wall system is extremely difficult. Currently, back-latching and hanging are the two most commonly used stone panel installation forms. The stone panel is a multi-point force bearing structure and the panel thickness of general stone curtain wall is about 30mm. In order to achieve architecture space shaping, on the one hand, stone panel thickness needs to be added at structural design. As the curtain wall dead weight is increased and the processing technology is more complex, the system safety and practicability can hardly be both considered. On the other hand, during installation on site, installation of stone panel for architectural shaping curtain wall is very difficult to control in terms of precision and the final installation quality and overall effect will be affected. In order to realize the architect’s bold conceiving on the stone shaping of the commercial annex building of Chengdu Yintai Center, this project adopts a stone curtain wall system simply supported on four sides, greatly improving the mechanical properties of stone panel under the same condition. The lock block fastening method assures the installation precision. The construction tasks are completed highly efficiently with high quality, perfectly showing the unique visual effect of the stone curtain wall.
VL  - 3
IS  - 5
ER  -

Copy | Download

Author Information

Fenghui Li

China Construction Shenzhen Decoration Co Ltd, China Construction Engineering Corporation, Wuhan, China
Chao Xie

China Construction Shenzhen Decoration Co Ltd, China Construction Engineering Corporation, Wuhan, China
Zhiyan Che

China Construction Shenzhen Decoration Co Ltd, China Construction Engineering Corporation, Wuhan, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Fenghui Li, Chao Xie, Zhiyan Che. (2018). Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Engineering and Applied Sciences, 3(5), 121-128. https://doi.org/10.11648/j.eas.20180305.11

Copy | Download

ACS Style

Fenghui Li; Chao Xie; Zhiyan Che. Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Eng. Appl. Sci. 2018, 3(5), 121-128. doi: 10.11648/j.eas.20180305.11

Copy | Download

AMA Style

Fenghui Li, Chao Xie, Zhiyan Che. Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall. Eng Appl Sci. 2018;3(5):121-128. doi: 10.11648/j.eas.20180305.11

Copy | Download

@article{10.11648/j.eas.20180305.11,
  author = {Fenghui Li and Chao Xie and Zhiyan Che},
  title = {Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall},
  journal = {Engineering and Applied Sciences},
  volume = {3},
  number = {5},
  pages = {121-128},
  doi = {10.11648/j.eas.20180305.11},
  url = {https://doi.org/10.11648/j.eas.20180305.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.eas.20180305.11},
  abstract = {With the development of curtain wall technology, along with the demand of artistic expression of architecture of curtain wall in China, some complex three-dimensional space shapes are increasingly used to the exterior of building. Among them, the construction of complex architecture formed by stone curtain wall system is extremely difficult. Currently, back-latching and hanging are the two most commonly used stone panel installation forms. The stone panel is a multi-point force bearing structure and the panel thickness of general stone curtain wall is about 30mm. In order to achieve architecture space shaping, on the one hand, stone panel thickness needs to be added at structural design. As the curtain wall dead weight is increased and the processing technology is more complex, the system safety and practicability can hardly be both considered. On the other hand, during installation on site, installation of stone panel for architectural shaping curtain wall is very difficult to control in terms of precision and the final installation quality and overall effect will be affected. In order to realize the architect’s bold conceiving on the stone shaping of the commercial annex building of Chengdu Yintai Center, this project adopts a stone curtain wall system simply supported on four sides, greatly improving the mechanical properties of stone panel under the same condition. The lock block fastening method assures the installation precision. The construction tasks are completed highly efficiently with high quality, perfectly showing the unique visual effect of the stone curtain wall.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Application of Composite Stone Simply Supported on Four Sides in Profiled Large Slab Stone Curtain Wall
AU  - Fenghui Li
AU  - Chao Xie
AU  - Zhiyan Che
Y1  - 2018/11/26
PY  - 2018
N1  - https://doi.org/10.11648/j.eas.20180305.11
DO  - 10.11648/j.eas.20180305.11
T2  - Engineering and Applied Sciences
JF  - Engineering and Applied Sciences
JO  - Engineering and Applied Sciences
SP  - 121
EP  - 128
PB  - Science Publishing Group
SN  - 2575-1468
UR  - https://doi.org/10.11648/j.eas.20180305.11
AB  - With the development of curtain wall technology, along with the demand of artistic expression of architecture of curtain wall in China, some complex three-dimensional space shapes are increasingly used to the exterior of building. Among them, the construction of complex architecture formed by stone curtain wall system is extremely difficult. Currently, back-latching and hanging are the two most commonly used stone panel installation forms. The stone panel is a multi-point force bearing structure and the panel thickness of general stone curtain wall is about 30mm. In order to achieve architecture space shaping, on the one hand, stone panel thickness needs to be added at structural design. As the curtain wall dead weight is increased and the processing technology is more complex, the system safety and practicability can hardly be both considered. On the other hand, during installation on site, installation of stone panel for architectural shaping curtain wall is very difficult to control in terms of precision and the final installation quality and overall effect will be affected. In order to realize the architect’s bold conceiving on the stone shaping of the commercial annex building of Chengdu Yintai Center, this project adopts a stone curtain wall system simply supported on four sides, greatly improving the mechanical properties of stone panel under the same condition. The lock block fastening method assures the installation precision. The construction tasks are completed highly efficiently with high quality, perfectly showing the unique visual effect of the stone curtain wall.
VL  - 3
IS  - 5
ER  -

Copy | Download