Adhesives and Adhesion Technologies: A Critical Review

Srijita Bharti

doi:doi:10.11648/j.ajpst.20180401.13

| Peer-Reviewed

Adhesives and Adhesion Technologies: A Critical Review

Srijita Bharti

Published in American Journal of Polymer Science and Technology (Volume 4, Issue 1)

Received: 29 July 2018 Accepted: 30 August 2018 Published: 17 September 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The article critically reviews about adhesives and their various adhesion phenomenons along with their categorization and functions. Benefit and drawbacks of adhesives joining was explained. Requirements for excellent bonding which includes, appropriate selection of adhesive, superior design for joining, surface cleansing, wetting were defined. The review clearly indicates the various theories involved in adhesion are namely mechanical interlocking, electrostatic, diffusion, wetting, chemical bonding, and weak boundary layer. Bond failure modes and their mechanism were elaborated briefly.

Published in	American Journal of Polymer Science and Technology (Volume 4, Issue 1)
DOI	10.11648/j.ajpst.20180401.13
Page(s)	36-41
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Adhesive, Adhesion Theories, Chemical Bonding, Mechanical Interlocking, Damage Modelling.

References

[1]	Modified from ASTM D 907-82, Standard Definitions of Terms Relating to Adhesives, published in Volume 15.06-Adhesives, 1984 Annual Book of ASTM Standards.
[2]	Wu, S., Polymer Interface and Adhesion, 1st ed., Marcel Dekker, New York, 1982.
[3]	Mittal, K. L., Adhesive Joints: Formation, Characteristics and Testing, Brill Academic Publishers, Netherlands, 2003.
[4]	Staff written, Joining techniques. Section 4, Machine Design, Fastening and Joining Reference Issue, 48(26): 155-162, 1976.
[5]	Sharpe, L. H., The materials, processes and design methods for assembly with adhesives. Machine Design, 38(19): 179-200, 1966.
[6]	Petrie, E. M., Plastic and elastomer adhesives (Chapter 7). Handbook of Plastics and Elastomers (C. A. Harper, ed.), McGraw-Hill, New York, 1996.
[7]	De Lollis, N. J., Adhesives for Metals-Theory and Technology, Industrial Press, New York, 1970.
[8]	Handbook of Plastics Joining, Plastics Design Library, William Andrew Publishing, Norwich, NY, 1997.
[9]	Ebnesajjad, S. and Ebnesajjad, C. F. Surface Preparation Techniques for Adhesive Bonding, William Andrew Publishing/Noyes, Norwich, NY, 2006.
[10]	Satas, D. and Tracton, A. A. eds., Coatings Technology Handbook, 2nd ed., Marcel Dekker, New York, NY, 2001.
[11]	Lee, L. H., Fundamentals of Adhesion, Plenum Press, New York, 2001.
[12]	DeMejo, L. P., Rimai, D. S., Sharpe, L. H. eds., Fundamentals of Adhesion and Interfaces, Taylor & Francis, London, 1999.
[13]	Petrie, E. M., Plastics and adhesives as adhesives. Handbook of Plastics and Elastomers (C. A. Harper, ed.), 4th ed., McGraw-Hill, New York, 2002.
[14]	Allen, K. W., Int. J. Adhes., 13: 67, 1993.
[15]	Deraguin, B. V., Smilga, V. P. J. Appl. Phys., 38: 4609, 1967.
[16]	Deraguin, B. V. Toporov, Y. P., Physiochem. Aspects Polym. Proc. Int. Symp., 2, p. 605, 1983.
[17]	Cross, J. A., Surface Contamination: Its Genesis, Detection and Control (Mittal, K. L. ed.), Vol. 2, p. 89, Plenum Press, New York, 1979.
[18]	Possart, W., Int. J. Adhes., 8: 77, 1988.
[19]	Roberts, A. D., J. Phys. D., 10: 1801, 1977.
[20]	Roberts, A. D., Adhesion, 1: 207, 1977.
[21]	Parker, S. P., ed., Encyclopedia of Chemistry, 2nded., McGraw-Hill, Inc., New York, 1992.
[22]	Fowkes, F. M., Acid-base interactions in polymer adhesion. Physicochemical Aspects of Polymers Surfaces (Mittal, K. L. ed.), Vol. 2, Plenum Press, New York, 1983.
[23]	Fowkes, F. M., Attractive forces at solid-liquid interface. Wetting, SCI Monograph No. 25, London, 1967.
[24]	Fowkes, F. M., Maruchi, S., Org. Coat. Plast. Chem. Prep., 37: 605, 1977.
[25]	Fowkes, F. M., Mostafa, M. A., Ind. Eng. Chem., Prod. Res. Dev., 17: 3, 1978.
[26]	Gutmann, V., Donor-Acceptor Approach to Molecular Interaction, Plenum Press, New York, 1978.
[27]	Bolger, J. C., Michaels, A. S., Molecular structure and electrostatic interaction of polymer-solid interface. Interface Conversion for Polymer Coatings (P. Weiss and G. Dale Cheever, eds.), Elsevier, New York, 1968.
[28]	Douglas, B., McDaniel, D. H., Alexander, J. J., Concepts and Models of Inorganic Chemistry, 2nd ed., John Wiley & Sons, Inc., New York, 1983.
[29]	Mittal, K. L., Adhesion Measurement of Films and Coatings, Vol. 2, Brill Academic Publishers, Netherlands, 2001.
[30]	Bikerman, J. J., Causes of poor adhesion. Indus. Eng. Chem., 59(9), 40-44, 1967.
[31]	Mittal, K. L., Lee, K. W., Polymer Surfaces and Interfaces: Characterization, Modifi cation and Applications, VSP, Utrecht, Netherlands, 1997.
[32]	Mandolfino, C., Pizzorni, M., Duraility of polyamide bonded joints: influence of surface pre-treatment, Int. J of Adh.andAdh., http://doi.org/10.1016/ijadhadh.2018.08.002.
[33]	Budhe, S., Da Silva, L. F. M., An updated review of adhesively bonded joints in composite materials, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2016.10.010.
[34]	Staudt, Y., Schneider, J., Failure behaviour of silicone adhesive in bonded connection with simple geometry, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2017.12.015.
[35]	Belnoue, J. P. H., Hallett, S. R., Cohesive/adhesive failure interaction in ductile adhesive joint parts I: A smeared-crack model for cohesive failure, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2016.03.009.
[36]	He, X., A review of finite element analysis of adhesively bonded joints, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2011.01.006.
[37]	Ji, X., Guo, M., Preparation and properties of a chitosen-lignin wood adhesive, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2017.12.005.
[38]	Heidarpour, F., Farahani, M., Ghabezi, P., Experimental investigation of the effects of adhesive defects on the single lap joint strength, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2017.08.005.
[39]	Da Silva, L. F. M., Das Neves, P. J. C., Adams, R. D., Spelt, J. K., Analytical model of adhesively bonded joints-Part I: Literature survey, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2008.06.005.
[40]	Figueiredo, J. C. P., Da Silva, L. F. M., Adhesive thickness influence on the shear fracture toughness measurements of adhesive joints, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2018.02.015.
[41]	Packham, D. E., Surface energy, surface topography and adhesion, Int. J of Adh. andAdh., http://doi.org/10.1016/S0143-7496(03)00068-X.
[42]	Zhang, C., Liu, W., Adhesion properties of atactic polypropylene/acrylate blend copolymer and its adhesion mechanism for untreated polypropylene materials, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2017.09.007.
[43]	Cabral-Fonseca, S., Sousa, J., Durability of FRP – concrete bonded joints in structural rehabilitation: A review, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2018.02.014.
[44]	Sun, S., Liu, A., A review on mechanical properties of pressure sensitive adhesives, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2012.10.011.
[45]	Baldan, A., Adhesion phenomena in bonded joints, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2012.04.007.
[46]	Barry, C.P., Hansen, C.J., The identification and screening of lower toxicity solvents for contact adhesives, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2017.06.022.
[47]	Razavi, S. M. J., Khoramishad, H., Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2017.10.007.
[48]	Moya-Sanz, E. M., Garcia-Castillo, S. K., Effect of the geometry in the strength of single-lap adhesive joints of composites laminates under uniaxial tensile load, Int. J of Adh. andAdh., http://doi.org/10.1016/ijadhadh.2016.10.009.
[49]	Molitor, P., Barron, V., Young, T., Surface treatment of titanium for adhesive bonding to polymer composites: A review, Int. J of Adh. andAdh., http://doi.org/10.1016/S0143-7496(00)00044-0.
[50]	Park, Y. J., Sung, I. K., UV- and thermal-curring behaviours of dual-curable adhesives based on epoxy acrylate oligomers, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2009.02.001.
[51]	Jumbo, F. S., Wahab, M. M. A., Thermal residual stress analysis of epoxy bi-material laminates and bonded joints, Int. J of Adh. and Adh., http://doi.org/10.1016/ijadhadh.2010.03.009.

Cite This Article

Plain Text BibTeX RIS

APA Style

Srijita Bharti. (2018). Adhesives and Adhesion Technologies: A Critical Review. American Journal of Polymer Science and Technology, 4(1), 36-41. https://doi.org/10.11648/j.ajpst.20180401.13

Copy | Download

ACS Style

Srijita Bharti. Adhesives and Adhesion Technologies: A Critical Review. Am. J. Polym. Sci. Technol. 2018, 4(1), 36-41. doi: 10.11648/j.ajpst.20180401.13

Copy | Download

AMA Style

Srijita Bharti. Adhesives and Adhesion Technologies: A Critical Review. Am J Polym Sci Technol. 2018;4(1):36-41. doi: 10.11648/j.ajpst.20180401.13

Copy | Download

@article{10.11648/j.ajpst.20180401.13,
  author = {Srijita Bharti},
  title = {Adhesives and Adhesion Technologies: A Critical Review},
  journal = {American Journal of Polymer Science and Technology},
  volume = {4},
  number = {1},
  pages = {36-41},
  doi = {10.11648/j.ajpst.20180401.13},
  url = {https://doi.org/10.11648/j.ajpst.20180401.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20180401.13},
  abstract = {The article critically reviews about adhesives and their various adhesion phenomenons along with their categorization and functions. Benefit and drawbacks of adhesives joining was explained. Requirements for excellent bonding which includes, appropriate selection of adhesive, superior design for joining, surface cleansing, wetting were defined. The review clearly indicates the various theories involved in adhesion are namely mechanical interlocking, electrostatic, diffusion, wetting, chemical bonding, and weak boundary layer. Bond failure modes and their mechanism were elaborated briefly.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Adhesives and Adhesion Technologies: A Critical Review
AU  - Srijita Bharti
Y1  - 2018/09/17
PY  - 2018
N1  - https://doi.org/10.11648/j.ajpst.20180401.13
DO  - 10.11648/j.ajpst.20180401.13
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 36
EP  - 41
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20180401.13
AB  - The article critically reviews about adhesives and their various adhesion phenomenons along with their categorization and functions. Benefit and drawbacks of adhesives joining was explained. Requirements for excellent bonding which includes, appropriate selection of adhesive, superior design for joining, surface cleansing, wetting were defined. The review clearly indicates the various theories involved in adhesion are namely mechanical interlocking, electrostatic, diffusion, wetting, chemical bonding, and weak boundary layer. Bond failure modes and their mechanism were elaborated briefly.
VL  - 4
IS  - 1
ER  -

Copy | Download

Author Information

Srijita Bharti

Department of Chemistry, Cambridge Institute of Polytechnic, Ranchi, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Srijita Bharti. (2018). Adhesives and Adhesion Technologies: A Critical Review. American Journal of Polymer Science and Technology, 4(1), 36-41. https://doi.org/10.11648/j.ajpst.20180401.13

Copy | Download

ACS Style

Srijita Bharti. Adhesives and Adhesion Technologies: A Critical Review. Am. J. Polym. Sci. Technol. 2018, 4(1), 36-41. doi: 10.11648/j.ajpst.20180401.13

Copy | Download

AMA Style

Srijita Bharti. Adhesives and Adhesion Technologies: A Critical Review. Am J Polym Sci Technol. 2018;4(1):36-41. doi: 10.11648/j.ajpst.20180401.13

Copy | Download

@article{10.11648/j.ajpst.20180401.13,
  author = {Srijita Bharti},
  title = {Adhesives and Adhesion Technologies: A Critical Review},
  journal = {American Journal of Polymer Science and Technology},
  volume = {4},
  number = {1},
  pages = {36-41},
  doi = {10.11648/j.ajpst.20180401.13},
  url = {https://doi.org/10.11648/j.ajpst.20180401.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20180401.13},
  abstract = {The article critically reviews about adhesives and their various adhesion phenomenons along with their categorization and functions. Benefit and drawbacks of adhesives joining was explained. Requirements for excellent bonding which includes, appropriate selection of adhesive, superior design for joining, surface cleansing, wetting were defined. The review clearly indicates the various theories involved in adhesion are namely mechanical interlocking, electrostatic, diffusion, wetting, chemical bonding, and weak boundary layer. Bond failure modes and their mechanism were elaborated briefly.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Adhesives and Adhesion Technologies: A Critical Review
AU  - Srijita Bharti
Y1  - 2018/09/17
PY  - 2018
N1  - https://doi.org/10.11648/j.ajpst.20180401.13
DO  - 10.11648/j.ajpst.20180401.13
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 36
EP  - 41
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20180401.13
AB  - The article critically reviews about adhesives and their various adhesion phenomenons along with their categorization and functions. Benefit and drawbacks of adhesives joining was explained. Requirements for excellent bonding which includes, appropriate selection of adhesive, superior design for joining, surface cleansing, wetting were defined. The review clearly indicates the various theories involved in adhesion are namely mechanical interlocking, electrostatic, diffusion, wetting, chemical bonding, and weak boundary layer. Bond failure modes and their mechanism were elaborated briefly.
VL  - 4
IS  - 1
ER  -

Copy | Download