The aim of this work is the modeling by a numerical approach of the behavior of a compound parabolic trough concentrator (CPC) with double glazing using a nanofluid as working fluid. The base fluid is jatropha oil for it does not have an ecotoxic impact. The thermal oil, jatropha oil, selected takes into account the constraints related to sustainable development by reconciling ecological, social and economic aspects. The nanofluid used is aluminum oxide having a cylindrical shape with a dimension of 20 nm added to jatropha oil (Al2O3+jatropha oil). The volume fraction of the nanofluid is 10%. The numerical model developed is based on the detailed analysis of the different forms of heat transfer that occur in the CPC. The equilibrium equations for each element of the system have been set up. The different heat exchanges that took place in each compartment of the CPC were described. The heat transfer equations were solved by the Gauss-Seidel’s method. An advanced difference scheme is used for the storage terms and a decentered scheme for the transport terms. The numerical simulation has been implemented by matlab code. The effects of varying the mass flow rate and the width of the CPC canopy on the different parameters such as the fluid outlet temperature and the thermal efficiency of the collector are analyzed. The theoretical results showed that the lower the mass flow rate, the higher the fluid outlet temperature and thermal efficiency. They also establish that as the width increases the fluid temperature and thermal efficiency increases. The opening angle and the reflectance coefficient have an influence on the CPC operation. The higher these two parameters are, the higher the output temperature.
| Published in | American Journal of Nanosciences (Volume 8, Issue 2) |
| DOI | 10.11648/j.ajn.20220802.12 |
| Page(s) | 19-30 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
CPC, Daily Efficiency, Nanofluid, Numerical Simulation, Mass Flow, Outlet Temperature
| [1] | Gu X. T. R., M. G., Rosengarten G., Theoretical analysis of a novel portable, CPC-based solar thermal collector for methanol reforming. Applied Energy 119 465-475, 2014. |
| [2] | Kerfouf Abd el Malek, F. M., Etude de transfert de chaleur de nanofluide dans une enceinte cylindrique 2020. |
| [3] | Ahlam, G., Contribution à l’étude des transferts thermiques dans les nanofluides in Faculté des sciences de la Tehnologie, DEPARTEMENT DE GENIE MECANIQUE 2021: REPUBLIQUE ALGERIENNE DEMOCRATIQUE ET POPULAIRE. |
| [4] | Çolak A. B., Y. O., Bayrak M., Tezekici B. S., Experimental Study For Predicting The Specific Heat Of Water Based Cu-Al2O3 Hybrid Nanofluid Using Artificial Neural Network And Proposing New Correlation. International Journal of Energy Research. 44: 7198-7215. 2020. |
| [5] | Nguyen T. K., B. M. M., Ali J. A., Hamad S. M., Sheikholeslami M. et Shafee A., Macroscopic Modeling for Convection of Hybrid Nanofluid With Magnetic Effects. Physica A: Statistical Mechanics and its Applications, 534: 122136., 2019. |
| [6] | Cimpean D. S., S. M. A., Pop I., Mixed Convection of Hybrid Nanofluid In a Porous Trapezoidal Chamber. International Communications in Heat and Mass Transfer 116: 104627., 2020. |
| [7] | Adun H., W.-O. I., Okonkwo E. C., Bamisile O., Dagbasi M. et Abbasoglu S. (A Neural Network-Based Predictive Model For The Thermal Conductivity Of Hybrid Nanofluids. International Communications in Heat and Mass Transfer, 119: 104930., 2020. |
| [8] | ROETZEL Y., X. W., Conception for heat transfer correlation of nanofluids. International Journal of Heat and Mass Transfer. 43 (19), 3701-3707, 2000. |
| [9] | Pak B. C., Y. I. C., Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles. Experimental Heat Transfer. 11 151. 1998. |
| [10] | Einstein., A., Eine neue bestimmung der molekul dimensionen. Annalen der Physik, 19. Leipzig, 1906: p. 289–306. |
| [11] | H. C. Brinkman., The viscosity of concentrated suspensions and solution. Journal of Chemical Physics, 20., 1952: p. 571–81. |
| [12] | G. K., B., The effect of Brownian motion on the bulk stress in a suspension of spherical particles. Journal of Fluid Mechanics. 83 (1). 1977: p. 97–117. |
| [13] | Maiga S., P. S., Nguyen CT., Roy G., Galanis N., Heat transfer enhancement by using nanofluids in forced convection flows. International Journal of Heat and Fluid Flow. 26., 2005.: p. 530–46. |
| [14] | Maxwell, J. C. A., Treatise on electricity and magnetism. Oxford, UK. Clarendon Press. 1881. |
| [15] | Lu S., L. H., Effective conductivity of composites containing aligned spherical inclusions of finite conductivity. Journal of Applied Physics. 79: 6761–9., 1996. |
| [16] | P. Keblinski, J. A. E., D. G. Cahill., Nanofluids for thermal transport. Materials today., 2005: p. 8-36. |
| [17] | Timofeeva EV, G. A., McCloskey JM, Tolmachev YV., Thermal conductivity and particle agglomeration in alumina nanofluids: experiment and theory. Physical Review. 76: 061203, 2007. |
| [18] | R. Tchinda, solved the governing equations of the energy to predicted the performance of air heater collector with the CPC having an absorber with flat plate. 2008. |
| [19] | DUFFIE. J. A., B. W. A., Solar engineering of thermal processes, ed. é. 2nd. 1991, Wiley. |
| [20] | Hsieh, C. K., Thermal analysis of CPC collectors. Elsevier Ltd, January 1981, Department of Mechanical Engineering, University of Florida. |
APA Style
Souleymane Ouedraogo, Sampawinde Augustin Zongo, Jean-Fidele Nzihou, Tizane Daho, Antoine Bere, et al. (2022). A Numerical Approach of the Behavior of a Compound Parabolic Trough Concentrator (CPC) with Double Glazing Using a Nanofluid as Working Fluid. American Journal of Nanosciences, 8(2), 19-30. https://doi.org/10.11648/j.ajn.20220802.12
ACS Style
Souleymane Ouedraogo; Sampawinde Augustin Zongo; Jean-Fidele Nzihou; Tizane Daho; Antoine Bere, et al. A Numerical Approach of the Behavior of a Compound Parabolic Trough Concentrator (CPC) with Double Glazing Using a Nanofluid as Working Fluid. Am. J. Nanosci. 2022, 8(2), 19-30. doi: 10.11648/j.ajn.20220802.12
AMA Style
Souleymane Ouedraogo, Sampawinde Augustin Zongo, Jean-Fidele Nzihou, Tizane Daho, Antoine Bere, et al. A Numerical Approach of the Behavior of a Compound Parabolic Trough Concentrator (CPC) with Double Glazing Using a Nanofluid as Working Fluid. Am J Nanosci. 2022;8(2):19-30. doi: 10.11648/j.ajn.20220802.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajn.20220802.12,
author = {Souleymane Ouedraogo and Sampawinde Augustin Zongo and Jean-Fidele Nzihou and Tizane Daho and Antoine Bere and Bila Gerard Segda and Jean Koulidiati},
title = {A Numerical Approach of the Behavior of a Compound Parabolic Trough Concentrator (CPC) with Double Glazing Using a Nanofluid as Working Fluid},
journal = {American Journal of Nanosciences},
volume = {8},
number = {2},
pages = {19-30},
doi = {10.11648/j.ajn.20220802.12},
url = {https://doi.org/10.11648/j.ajn.20220802.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajn.20220802.12},
abstract = {The aim of this work is the modeling by a numerical approach of the behavior of a compound parabolic trough concentrator (CPC) with double glazing using a nanofluid as working fluid. The base fluid is jatropha oil for it does not have an ecotoxic impact. The thermal oil, jatropha oil, selected takes into account the constraints related to sustainable development by reconciling ecological, social and economic aspects. The nanofluid used is aluminum oxide having a cylindrical shape with a dimension of 20 nm added to jatropha oil (Al2O3+jatropha oil). The volume fraction of the nanofluid is 10%. The numerical model developed is based on the detailed analysis of the different forms of heat transfer that occur in the CPC. The equilibrium equations for each element of the system have been set up. The different heat exchanges that took place in each compartment of the CPC were described. The heat transfer equations were solved by the Gauss-Seidel’s method. An advanced difference scheme is used for the storage terms and a decentered scheme for the transport terms. The numerical simulation has been implemented by matlab code. The effects of varying the mass flow rate and the width of the CPC canopy on the different parameters such as the fluid outlet temperature and the thermal efficiency of the collector are analyzed. The theoretical results showed that the lower the mass flow rate, the higher the fluid outlet temperature and thermal efficiency. They also establish that as the width increases the fluid temperature and thermal efficiency increases. The opening angle and the reflectance coefficient have an influence on the CPC operation. The higher these two parameters are, the higher the output temperature.},
year = {2022}
}
TY - JOUR T1 - A Numerical Approach of the Behavior of a Compound Parabolic Trough Concentrator (CPC) with Double Glazing Using a Nanofluid as Working Fluid AU - Souleymane Ouedraogo AU - Sampawinde Augustin Zongo AU - Jean-Fidele Nzihou AU - Tizane Daho AU - Antoine Bere AU - Bila Gerard Segda AU - Jean Koulidiati Y1 - 2022/06/30 PY - 2022 N1 - https://doi.org/10.11648/j.ajn.20220802.12 DO - 10.11648/j.ajn.20220802.12 T2 - American Journal of Nanosciences JF - American Journal of Nanosciences JO - American Journal of Nanosciences SP - 19 EP - 30 PB - Science Publishing Group SN - 2575-4858 UR - https://doi.org/10.11648/j.ajn.20220802.12 AB - The aim of this work is the modeling by a numerical approach of the behavior of a compound parabolic trough concentrator (CPC) with double glazing using a nanofluid as working fluid. The base fluid is jatropha oil for it does not have an ecotoxic impact. The thermal oil, jatropha oil, selected takes into account the constraints related to sustainable development by reconciling ecological, social and economic aspects. The nanofluid used is aluminum oxide having a cylindrical shape with a dimension of 20 nm added to jatropha oil (Al2O3+jatropha oil). The volume fraction of the nanofluid is 10%. The numerical model developed is based on the detailed analysis of the different forms of heat transfer that occur in the CPC. The equilibrium equations for each element of the system have been set up. The different heat exchanges that took place in each compartment of the CPC were described. The heat transfer equations were solved by the Gauss-Seidel’s method. An advanced difference scheme is used for the storage terms and a decentered scheme for the transport terms. The numerical simulation has been implemented by matlab code. The effects of varying the mass flow rate and the width of the CPC canopy on the different parameters such as the fluid outlet temperature and the thermal efficiency of the collector are analyzed. The theoretical results showed that the lower the mass flow rate, the higher the fluid outlet temperature and thermal efficiency. They also establish that as the width increases the fluid temperature and thermal efficiency increases. The opening angle and the reflectance coefficient have an influence on the CPC operation. The higher these two parameters are, the higher the output temperature. VL - 8 IS - 2 ER -
Information
Email: