| Peer-Reviewed

Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine

Received: 24 September 2019     Accepted: 7 November 2019     Published: 8 June 2020
Views:       Downloads:
Abstract

Groundnut is a valuable crop with an excellent source of protein that can be used to fight hunger and malnutrition especially in underdeveloped and developing countries. Products such as oil, peanut butter, soups, roasted groundnuts among others can be obtained from groundnuts However, in developing nations especially Nigeria, roasting of groundnut, a means of moisture removal and food processing, has been associated with drudgery and bad hygiene (that is, use of sand, ashes as means of heat transfer). This can be a source of physical and microbial contamination to the product. Hence, the need for development and evaluation of a peanut processor that alleviate the problems associated with the process. Design, fabrication and performance evaluation of groundnut roasting machine were carried out at the AGE Workshop, Federal University of Technology, Akure, Nigeria. The factors considered for the design were; the volume of product to be roasted, reduction of heat loss, inclusion of stirrer and stable roasting temperature. Raw groundnuts were roasted with the fabricated machine and parameters such as weight of raw groundnuts, weight of roasted groundnuts, weight of seeds damaged were used to evaluate the efficiency of the machine. The effect of sand on the roasted groundnuts was also determined through microbial analysis, free fatty acids, peroxide value, tannin, flavonoid, phytate and phenol. The average percentage losses were 16.15% and 5.89% for traditional and mechanical methods, respectively. The traditional and mechanical methods recorded an average roasting efficiency of 83.85% and 94.11%, respectively. Both processing methods produced a product with considerable low moisture content. Processing time was reduced by 18 minutes when processed mechanically with significantly (p < 0.05) lower antinutrients and reduced microbial load. Mechanical processing of groundnuts is more efficient than traditional roasting in terms of time and overall quality of the roasted groundnut.

Published in American Journal of Engineering and Technology Management (Volume 5, Issue 3)
DOI 10.11648/j.ajetm.20200503.11
Page(s) 48-55
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Groundnut, Roasting Machine, Efficiency, Processing Time, Overall Quality

References
[1] Allen, J. C. and Hamilton, R. J. (1994). Rancidity in Foods 3rd edition; Blackie Academic and Professional, Glasgow.
[2] AOAC (2012) Official Method of Analysis: Association of Analytical Chemists. 19th Edition, Washington DC, 121–130.
[3] Bai, S. H., Darby, I, Nevenimo, T., Hannet, G., Hannet, D., Poienou, M., Grant, E., Brooks, P., Walton, D., Randall, B., Wallace, H. M. (2017). Effects of roasting on kernel peroxide value, free fatty acid, fatty acid composition and crude protein content. PLoS ONE, 12 (9): e0184279. https://doi.org/10.1371/journal.pone.0184279
[4] CGIAR (2004). Encyclopedia of Agricultural Science. Technical advisory committee, Priorites and Strategies for resources allocation during (1998-2000): In CGIAR Financial Report 2004 (English), Washington, DC: World Bank. http://documents.worldbank.org/curated/en/317861468314730882/CGIAR-Financial-Report-2004
[5] Chukwumah, Y., Walker, L., Vogler, B. and Verghese, M., (2007). Effects of Roasting on Kernel Peroxide Value, Free Fatty acid, Fatty Acid Composition and Crude Protein content. Journal of Agriculture and Food Chemistry; 55: 9266 – 9273. DOI: 10.1371/journal.pone.0184279.
[6] Eglezos, S., Huang, B and Stuttard, E. (2007). A Survey of the Bacteriological Quality of Preroasted Peanut, Almond, Cashew, Hazelnut, and Brazil Nut Kernels Received into Three Australian Nut-Processing Facilities over a Period of 3 Years. Journal of Food Protection, 71 (2): 402-404.
[7] Gell, H. A. and Porto, B. (1996). Removal Coffee Roaster Oven Chamber: United State Patent US5500237.
[8] Gotoh, N and Wada, S. (2006). The Importance of Peroxide Value in Assessing Food Quality and Food Safety. Journal of the American Oil Chemists; 83 (5): 473–474.
[9] Harkness, C. K., Kolawale, B. and Yayock, J. Y. (1976). Groundnut Research in Nigeria. Samaru Conference Paper.
[10] Harrigan, W. F. and McCance, M. E. (1990). Laboratory Methods in Food and Dairy Microbiology, 8th edition; Academic Press, London.
[11] Ihekoronye, A. I. and Ngoddy, P. O. (1985). Integrated Food Science and Technology for the Tropics. Macmillan Education Ltd. London.
[12] Jackson, S. A. and Dobson, A. D. W. (2016). Yeasts and Molds: Aspergillus flavus. Reference Module in Food Science. https://doi.org/10.1016/B978-0-08-100596-5.01086-6
[13] Kabri, H. U. Ankidawa, B. A. and Elson, J. (2006). Modification and Performance Evaluation of a Manually Operated Drum Groundnut Roaster. Savannah Journal of Agriculture, 1 (2): 88–93.
[14] Mada, S. B., Garba, A., Mohammed, A., Mohammed, A., Olagunju, A., Mohammed, H. A. (2012). Effects of Boiling and Roasting on Antinutrients and Proximate Composition of Local and Some Selected Improved Varieties of Arachis hypogea I. (Groundnut), 1 (1): 45-53.
[15] Maduako, J. N. and Hamman, M. (2004). Determination of some Physical Properties of three Groundnut Varieties. Nigerian Journal of Technology, 24 (2): 159–280.
[16] Makkar, H. P. S., Bluemmel, M., Borowy, N. K. and Becker, K. (1993). Gravimetric Determination of Tannins and their Correlations with Chemical and Protein Precipitation Methods. Journal of Science, Food and Agriculture; 61: 161–165.
[17] Okunola, A. (2016). Nigeria: Positioning Rural Economy for Implementation of Sustainable Development Goals. Turkish Journal of Agriculture, Food Science and Technology; 4: 752–757. 10.24925/turjaf.v4i9.752-757.858.
[18] Olaniyan, A. M., Karim, O. R., and Eromosele, E. O., (2017). Design and Development a Smallscale Peanut Roaster, The Journal of the Association of Professional Engineers of Trinidad and Tobago, 45 (2): 34–39.
[19] Osman, A. M. (2007). Effect of different processing methods on nutrient composition, anti-nutritional factors and in vitro protein digestibility on Dolichos lablab bean (Lablab purpureus (L) Sweet). Pakistan Journal of Nutrition, 6 (4): 299-303.
[20] Ozdemir, M., Ackurt, F., Yildiz, M., Biringen, G., Gurcan, T. and Loker, M. (2001). Effect of Roasting on some Nutrients of Hazelnuts (Corylus Avellena L.). Food Chemistry, 73: 185–190.
[21] Quettier-Deleu, C., Gressier, B., Vasseur, J., Dine, T., Brunet, C., Luyckx, M., Cazin, M., Cazin, J. C., Bailleul, F. and Trotin, F. (2000). Phenolic Compounds and Antioxidant Activities of Buckwheat (Fagopyrum esculentum M.) Hulls and Flour. Journal of Ethnopharmacology; 72 (1-2): 35–42.
[22] Randhir, R., Kwon, Y-I. and Shetty, K. (2008). Effect of Thermal Processing on Phenolics, Antioxidant Activity and Health-relevant Functionality of Select Grain Sprouts and Seedlings. Innovative Food Science and Emerging Technologies; 9: 355–364. 10.1016/j.ifset.2007.10.004.
[23] Shehu, A. A., Balami, A. A., Osunde, Z. O. and Ademoh, N. A. (2017). Design and Fabrication of Shea Nut Steam Roaster. International Journal of Scientific Research Engineering and Technology ISSN 2278 – 0882, 6 (11): 1113–1121.
[24] Singleton, V. L., Orthofer, R. and Lamuela-Raventos, R. M. (1999). Analysis of Total Phenols and other Oxidation Substrates and Antioxidants by means of Folin-Ciocalteu Reagent. Methods Enzymol.; 299: 152–178.
[25] Ugwuoke, I. C., Okegbile, O. J., Ikechukwu, I. B. and Robert T. J., (2014). Design and Development of Manually Operated Roasted Groundnut Seeds Peeling Machine, International Journal of Recent Development in Engineering and Technology, ISSN 2347-6435 (Online) 2 (4): 30–33.
Cite This Article
  • APA Style

    Alao Adeyinka Idowu, Akande Olamide Abigael, Adeoye Babatunde Kazeem, Owoyemi Modupe Beatrice. (2020). Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine. American Journal of Engineering and Technology Management, 5(3), 48-55. https://doi.org/10.11648/j.ajetm.20200503.11

    Copy | Download

    ACS Style

    Alao Adeyinka Idowu; Akande Olamide Abigael; Adeoye Babatunde Kazeem; Owoyemi Modupe Beatrice. Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine. Am. J. Eng. Technol. Manag. 2020, 5(3), 48-55. doi: 10.11648/j.ajetm.20200503.11

    Copy | Download

    AMA Style

    Alao Adeyinka Idowu, Akande Olamide Abigael, Adeoye Babatunde Kazeem, Owoyemi Modupe Beatrice. Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine. Am J Eng Technol Manag. 2020;5(3):48-55. doi: 10.11648/j.ajetm.20200503.11

    Copy | Download

  • @article{10.11648/j.ajetm.20200503.11,
      author = {Alao Adeyinka Idowu and Akande Olamide Abigael and Adeoye Babatunde Kazeem and Owoyemi Modupe Beatrice},
      title = {Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine},
      journal = {American Journal of Engineering and Technology Management},
      volume = {5},
      number = {3},
      pages = {48-55},
      doi = {10.11648/j.ajetm.20200503.11},
      url = {https://doi.org/10.11648/j.ajetm.20200503.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajetm.20200503.11},
      abstract = {Groundnut is a valuable crop with an excellent source of protein that can be used to fight hunger and malnutrition especially in underdeveloped and developing countries. Products such as oil, peanut butter, soups, roasted groundnuts among others can be obtained from groundnuts However, in developing nations especially Nigeria, roasting of groundnut, a means of moisture removal and food processing, has been associated with drudgery and bad hygiene (that is, use of sand, ashes as means of heat transfer). This can be a source of physical and microbial contamination to the product. Hence, the need for development and evaluation of a peanut processor that alleviate the problems associated with the process. Design, fabrication and performance evaluation of groundnut roasting machine were carried out at the AGE Workshop, Federal University of Technology, Akure, Nigeria. The factors considered for the design were; the volume of product to be roasted, reduction of heat loss, inclusion of stirrer and stable roasting temperature. Raw groundnuts were roasted with the fabricated machine and parameters such as weight of raw groundnuts, weight of roasted groundnuts, weight of seeds damaged were used to evaluate the efficiency of the machine. The effect of sand on the roasted groundnuts was also determined through microbial analysis, free fatty acids, peroxide value, tannin, flavonoid, phytate and phenol. The average percentage losses were 16.15% and 5.89% for traditional and mechanical methods, respectively. The traditional and mechanical methods recorded an average roasting efficiency of 83.85% and 94.11%, respectively. Both processing methods produced a product with considerable low moisture content. Processing time was reduced by 18 minutes when processed mechanically with significantly (p < 0.05) lower antinutrients and reduced microbial load. Mechanical processing of groundnuts is more efficient than traditional roasting in terms of time and overall quality of the roasted groundnut.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design, Fabrication and Evaluation of Electrically-operated Groundnut Roasting Machine
    AU  - Alao Adeyinka Idowu
    AU  - Akande Olamide Abigael
    AU  - Adeoye Babatunde Kazeem
    AU  - Owoyemi Modupe Beatrice
    Y1  - 2020/06/08
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajetm.20200503.11
    DO  - 10.11648/j.ajetm.20200503.11
    T2  - American Journal of Engineering and Technology Management
    JF  - American Journal of Engineering and Technology Management
    JO  - American Journal of Engineering and Technology Management
    SP  - 48
    EP  - 55
    PB  - Science Publishing Group
    SN  - 2575-1441
    UR  - https://doi.org/10.11648/j.ajetm.20200503.11
    AB  - Groundnut is a valuable crop with an excellent source of protein that can be used to fight hunger and malnutrition especially in underdeveloped and developing countries. Products such as oil, peanut butter, soups, roasted groundnuts among others can be obtained from groundnuts However, in developing nations especially Nigeria, roasting of groundnut, a means of moisture removal and food processing, has been associated with drudgery and bad hygiene (that is, use of sand, ashes as means of heat transfer). This can be a source of physical and microbial contamination to the product. Hence, the need for development and evaluation of a peanut processor that alleviate the problems associated with the process. Design, fabrication and performance evaluation of groundnut roasting machine were carried out at the AGE Workshop, Federal University of Technology, Akure, Nigeria. The factors considered for the design were; the volume of product to be roasted, reduction of heat loss, inclusion of stirrer and stable roasting temperature. Raw groundnuts were roasted with the fabricated machine and parameters such as weight of raw groundnuts, weight of roasted groundnuts, weight of seeds damaged were used to evaluate the efficiency of the machine. The effect of sand on the roasted groundnuts was also determined through microbial analysis, free fatty acids, peroxide value, tannin, flavonoid, phytate and phenol. The average percentage losses were 16.15% and 5.89% for traditional and mechanical methods, respectively. The traditional and mechanical methods recorded an average roasting efficiency of 83.85% and 94.11%, respectively. Both processing methods produced a product with considerable low moisture content. Processing time was reduced by 18 minutes when processed mechanically with significantly (p < 0.05) lower antinutrients and reduced microbial load. Mechanical processing of groundnuts is more efficient than traditional roasting in terms of time and overall quality of the roasted groundnut.
    VL  - 5
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Department of Food Science and Technology, The Federal University of Technology, Akure, Nigeria

  • Department of Food Science and Technology, The Federal University of Technology, Akure, Nigeria

  • Department of Food Science and Technology, The Federal University of Technology, Akure, Nigeria

  • Department of Food Science and Technology, The Federal University of Technology, Akure, Nigeria

  • Sections