Wood based panel is a kind of panel or molded product made of wood or other non wood plants as raw materials, which is separated into various unit materials by certain mechanical processing, and then glued with or without adhesives and other additives. The rapid development of China's wood-based panel industry is mainly used in the field of wood decorative materials. In recent years, the harm of pathogenic microorganisms such as Xinguan and monkeypox to the society has prompted people to pay attention to disease control and prevention. The public's health requirements for living, working and living environment have been greatly improved. This situation has effectively promoted the rapid development of antibacterial technology and antibacterial materials. Wood and wood products are widely used in public environment such as restaurants, vehicles and ships, hospitals and other places. Due to inadequate daily cleaning and disinfection, these places have become the focus of microbial and bacterial reproduction. Therefore, the wood reinforced with antibacterial agents is used as building materials. Because of its strong antibacterial properties, the surface of wood materials can inhibit and sterilize pathogenic microorganisms. The research and appearance of antibacterial decorative wood-based panels show important practical significance. Antibacterial materials are usually obtained by adding antibacterial agents. Antibacterial agents are highly sensitive substances to some bacteria, molds and other microorganisms. They have a wide variety and different properties. With the development of nanotechnology, inorganic nano materials have been used as antibacterial materials, which can effectively inhibit bacteria to a certain extent. This paper introduces several main antibacterial materials used in wood decorative materials, such as nano silver activated carbon, nano silver zeolite, nano silver zinc oxide, nano silver titanium dioxide, and discusses their antibacterial mechanism and preparation methods.
Published in | American Journal of Environmental Science and Engineering (Volume 6, Issue 2) |
DOI | 10.11648/j.ajese.20220602.15 |
Page(s) | 119-123 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Antibacterial Materials, Antibacterial Agents, Wood Decorative Materials, Finishes, Wood Panel
[1] | Hemmil V, Adamopoulos S, Olov karlssonb O, et al. Development of sustainable bio-adhesives for engineered wood panels - A Review [J]. RSC Advances, 2017, 7 (61): 38604-38630. |
[2] | China National Forest Products Industry Association, China Wood Based Panel Industry Report [R]. China Forestry Publishing House, Beijing, 2019. |
[3] | Y. Pang, W. Xu, Q. Li, C. Li, and A. Mao, Research progress of bio-based wood adhesives [J]. China Forest Products Industry, 45 (4), 3-7, 2018. |
[4] | P. Wei, X. Rao, J. Yang, Y. Guo, H. Chen, Y. Zhang, S. Chen, X. Deng, and X. Wang, Hot pressing of wood-based composites: a review [J]. Forest Products Journal, 66 (7/8): 419-427, 2016. |
[5] | X. Li, J. Luo, J. Li, Q. Gao. Effects of diatomite inorganic fillers on the properties of a melamine–urea–formaldehyde resin. Journal of Applied Polymer Science, 133 (41): 44095-44103, 2016. |
[6] | Zhao P. W. and G. Q. Xu. Application of Nanotechnology to Wood Preservation [J]. World Forestry Research, 35 (1): 56-62, 2022. |
[7] | Hua B. H. X. Q. Zhang, C. Fu and Y. X. Liu. Antibacterial Technology on Medium Density Fiberboard [J]. Journal of Northeast Forestry University, (8): 95-98, 2014. |
[8] | Gao X. Study on Preparation and properties of environment friendly mould proof medium density fiberboard [D]. Beijing Forestry University. |
[9] | Xu M. F. Z. Li, J. H. Wang and J. Li. Study on Antibacterial Properties of Poplar Wood Treated with CuO-ZnO Nanocomposite Preservative [J]. Journal of Southwest Forestry College, 1, 87-92, 2014. |
[10] | Chirkov S. N. The Antiviral Activity of Chitosan (Review) [J]. Applied Biochemistry and Microbiology, 38 (1), 1-8, 2012. |
[11] | Hu X. K. S. Cook, P. Wang and H. M. Wang. In vitro evaluation of cytotoxicity of engineered metal oxide nanoparticles [J]. Science of the Total Environment, 407 (8), 3070-3072, 2009. |
[12] | Aruoja V. Toxicity of nanoparticles of CuO, ZnO and TiO2 to microalgae Pseudokirchneriella subcapitata [J]. Science of the Total Environment, 407 (4), 1461-1468, 2019. |
[13] | Hastrup A. C., S. B. Jensen, C. Clausen and F. Green. The effect of CaCl2 on growth rate, wood decay and oxalic acid accumulation in Serpula lacrymans and related brown-rot fungi. Holzforschung, 60 (3), 339-345, 2016. |
[14] | Dias N. and N. Lima. A comparative study using a fluorescence-based and a direct-count assay to determine cytotoxicity in Tetrahymena pyriformis [J]. Research in Microbiology, 153 (5), 313-322, 2002. |
[15] | Xie G. J. and Y. D. Zhou. In-situ synthesis and anti-mold property of nano-copper of the heat-treated wood [J]. Journal of South China Agricultural University, 39 (3), 96-101, 2018. |
APA Style
Zhiyong Zheng, Ruixue Jia, Kaijie Zheng, Kaisen Zheng, Qi Li, et al. (2022). Research and Application of Antibacterial Materials for Environmental Friendly Wood Decorative Materials. American Journal of Environmental Science and Engineering, 6(2), 119-123. https://doi.org/10.11648/j.ajese.20220602.15
ACS Style
Zhiyong Zheng; Ruixue Jia; Kaijie Zheng; Kaisen Zheng; Qi Li, et al. Research and Application of Antibacterial Materials for Environmental Friendly Wood Decorative Materials. Am. J. Environ. Sci. Eng. 2022, 6(2), 119-123. doi: 10.11648/j.ajese.20220602.15
@article{10.11648/j.ajese.20220602.15, author = {Zhiyong Zheng and Ruixue Jia and Kaijie Zheng and Kaisen Zheng and Qi Li and An Mao}, title = {Research and Application of Antibacterial Materials for Environmental Friendly Wood Decorative Materials}, journal = {American Journal of Environmental Science and Engineering}, volume = {6}, number = {2}, pages = {119-123}, doi = {10.11648/j.ajese.20220602.15}, url = {https://doi.org/10.11648/j.ajese.20220602.15}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajese.20220602.15}, abstract = {Wood based panel is a kind of panel or molded product made of wood or other non wood plants as raw materials, which is separated into various unit materials by certain mechanical processing, and then glued with or without adhesives and other additives. The rapid development of China's wood-based panel industry is mainly used in the field of wood decorative materials. In recent years, the harm of pathogenic microorganisms such as Xinguan and monkeypox to the society has prompted people to pay attention to disease control and prevention. The public's health requirements for living, working and living environment have been greatly improved. This situation has effectively promoted the rapid development of antibacterial technology and antibacterial materials. Wood and wood products are widely used in public environment such as restaurants, vehicles and ships, hospitals and other places. Due to inadequate daily cleaning and disinfection, these places have become the focus of microbial and bacterial reproduction. Therefore, the wood reinforced with antibacterial agents is used as building materials. Because of its strong antibacterial properties, the surface of wood materials can inhibit and sterilize pathogenic microorganisms. The research and appearance of antibacterial decorative wood-based panels show important practical significance. Antibacterial materials are usually obtained by adding antibacterial agents. Antibacterial agents are highly sensitive substances to some bacteria, molds and other microorganisms. They have a wide variety and different properties. With the development of nanotechnology, inorganic nano materials have been used as antibacterial materials, which can effectively inhibit bacteria to a certain extent. This paper introduces several main antibacterial materials used in wood decorative materials, such as nano silver activated carbon, nano silver zeolite, nano silver zinc oxide, nano silver titanium dioxide, and discusses their antibacterial mechanism and preparation methods.}, year = {2022} }
TY - JOUR T1 - Research and Application of Antibacterial Materials for Environmental Friendly Wood Decorative Materials AU - Zhiyong Zheng AU - Ruixue Jia AU - Kaijie Zheng AU - Kaisen Zheng AU - Qi Li AU - An Mao Y1 - 2022/06/30 PY - 2022 N1 - https://doi.org/10.11648/j.ajese.20220602.15 DO - 10.11648/j.ajese.20220602.15 T2 - American Journal of Environmental Science and Engineering JF - American Journal of Environmental Science and Engineering JO - American Journal of Environmental Science and Engineering SP - 119 EP - 123 PB - Science Publishing Group SN - 2578-7993 UR - https://doi.org/10.11648/j.ajese.20220602.15 AB - Wood based panel is a kind of panel or molded product made of wood or other non wood plants as raw materials, which is separated into various unit materials by certain mechanical processing, and then glued with or without adhesives and other additives. The rapid development of China's wood-based panel industry is mainly used in the field of wood decorative materials. In recent years, the harm of pathogenic microorganisms such as Xinguan and monkeypox to the society has prompted people to pay attention to disease control and prevention. The public's health requirements for living, working and living environment have been greatly improved. This situation has effectively promoted the rapid development of antibacterial technology and antibacterial materials. Wood and wood products are widely used in public environment such as restaurants, vehicles and ships, hospitals and other places. Due to inadequate daily cleaning and disinfection, these places have become the focus of microbial and bacterial reproduction. Therefore, the wood reinforced with antibacterial agents is used as building materials. Because of its strong antibacterial properties, the surface of wood materials can inhibit and sterilize pathogenic microorganisms. The research and appearance of antibacterial decorative wood-based panels show important practical significance. Antibacterial materials are usually obtained by adding antibacterial agents. Antibacterial agents are highly sensitive substances to some bacteria, molds and other microorganisms. They have a wide variety and different properties. With the development of nanotechnology, inorganic nano materials have been used as antibacterial materials, which can effectively inhibit bacteria to a certain extent. This paper introduces several main antibacterial materials used in wood decorative materials, such as nano silver activated carbon, nano silver zeolite, nano silver zinc oxide, nano silver titanium dioxide, and discusses their antibacterial mechanism and preparation methods. VL - 6 IS - 2 ER -