Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor

Adekunle Adebola Olayinka; Adekunle Adewale Oluwadamilare; Ayo Femi Emmanuel

doi:doi:10.11648/j.ajece.20210502.11

| Peer-Reviewed

Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor

Adekunle Adebola Olayinka, Adekunle Adewale Oluwadamilare, Ayo Femi Emmanuel

Published in American Journal of Electrical and Computer Engineering (Volume 5, Issue 2)

Received: 23 November 2020 Accepted: 5 July 2021 Published: 13 July 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This research work is designed as the distance measurement with energy conservation system using Ultrasonic sensor and Arduino NANO. Ultrasonic sensor emits high frequency sound waves, which reflects from target surfaces. This work utilized these sound waves through Ultrasonic sensor HC-SR04 to determine the change in distance and to apply it to detect the presence of an obstacle (person in this case), which in turns triggers a light bulb ON. Sonar waves are projected back to the receiving end of the sensor after which electrical pulses emitted from the sensor are sent into the Arduino NANO board, electrical signals are then sent to the LEDs and lighting system (bulbs). This work shows the importance of distance measurement to an automatic, hands-free environment control, efficient use of energy sources, and conservation of energy. The experimental results have shown minimal errors (< 3cm) for distances between 10cm and 100cm as the research deployment is most suitable within these distances. The results also describe the corresponding responses of the control system to the different physical conditions likely to be present. The above processes focus on electrical energy conservation as the light bulb comes ON when a person approaches the sensing system and goes OFF when the person leaves.

Published in	American Journal of Electrical and Computer Engineering (Volume 5, Issue 2)
DOI	10.11648/j.ajece.20210502.11
Page(s)	40-44
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Arduino NANO, Distance, Energy, HC-SR04

References

[1]	Christofer N. Y., Mathew S. A (2017). “Analysis of Obstacle Detection Using Ultrasonic Sensor”. International Research Journal of Engineering and Technology (IRJET), 4 (1), Pp. 1015–1019.
[2]	Latha N. A., Murthy B. R, Kumar K. B (2016) “Distance Sensing with Ultrasonic Sensor and Arduino” International Journal of Advanced Research, Ideas and Innovations in Technology Volume 2, Issue 5, pp. 1–5.
[3]	Mutava M., Paul K. (2020) “Arduino Uno, Ultrasonic Sensor HC-SR04 Motion Detector with Display of Distance in the LCD” International Journal of Engineering Research & Technology, Vol. 9 Issue 05, pp 936–942.
[4]	Bello M. I., Gana S. M., M. I. and Faruk M. I., Umar M. J. (2018). “AUTONOMOUS ULTRASONIC BASED WATER LEVEL DETECTION AND CONTROL SYSTEM” Nigerian Journal of Technology, Volume 37, No. 2, pp. 508–513.
[5]	Khudaija T. M., Hamza I. (2017): “DESIGNING OF LOW COST ARDUINO BASED ULTRASONIC SONAR SYSTEM” VFAST Transactions on Software Engineering Volume 12, No 3, pp. 57-65.
[6]	Baskoro F, Reynaldo B R (2016). “Detection of Lock on Radar System Based on Ultrasonic US 100 Sensor And Arduino Uno R3 With Image Processing GUI”, IOP Conference Series: Materials Science and Engineering, pp 01–05.
[7]	Neeraja S., Sarita C. H., Shrikant M., Basant S. S., Bhavishya J., Garima S (2017). “Distance Measurement using Ultrasonic Sensor and Arduino” International Journal of Engineering Science and Computing, Volume 07, Issue No. 3, pp 5991–5992.
[8]	Husni M., Siahaan D. O, Ciptaningtyas H. T, Studiawan H and Aliarham Y. P (2016). “Liquid volume monitoring based on ultrasonic sensor and Arduino microcontroller” International Conference on Innovation in Engineering and Vocational Education. IOP Science, iopscience. iop. org, pp 01–10.
[9]	Vidhya D. S., D’Silva C. J., Rebelo D. P., Fernandes L. W. (2016). “Obstacle Detection using Ultrasonic Sensors” International Journal for Innovative Research in Science & Technology Volume 2, Issue 11. pp 316–320.
[10]	Parveen K., Animesh D., Manash P. B., Smriti D. (2019). “Smart Vehicle System using Arduino” ADBU Journal of Electrical and Electronics Engineering Volume 3, Issue 1. pp. 20-25.
[11]	Roni S., Adhi K., Nina S. A., Mitra D., Sparisoma V. (2017). “An Ultrasonic Sensor System for Vehicle Detection Application” Roni Stiawan et al J. Phys.: Conf. Ser. 1204 012017, pp 01-06.
[12]	T. V Groeningen, H. Driessen, J. Sohl, R. Voute (2018). “An ultrasonic sensor for human presence detection to assist rescue work in large buildings” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume IV-4/W7 pp 135-140.
[13]	Hassan M., Reza A., Mahmoud O., Seyed S. M. and Noboru N. (2011) “Determination of Ultrasonic Sensor Ability for Use as Guidance Sensors of Mobile Robots” Sensors and Materials, Vol. 24, No. 3 (2012) pp 115–126.
[14]	Kalyan D., V S P Chandrika K., Chinna R. A., M V Narayana (2020) “Accuracy Analysis Of An Ultrasonic Sensor Over An Open Channel Rectangular Notch For Rainwater Harvesting” international journal of scientific & technology research volume 9, issue 01 pp 2813–2816.
[15]	W. H. Strickland, R. H. King “Characteristics of ultrasonic ranging sensors in underground environment” Bureau of mines.
[16]	Manabu I., Makoto S., and Shin-nosuke S. (2009) “Evaluation of Method of Measuring Distance Between Object and Walls Using Ultrasonic Sensors” Journal of Asian Electric Vehicles, Volume 7, Number 1 pp 1207-1211.
[17]	Nagashima, Y., A. Ohya, and S. Yuta (1994) “Ultrasonic sensor for mobile robot to measure the normal direction of walls” The Journal of the Acoustical Society of Japan, Vol. 51, No. 1, pp 39-42.

Cite This Article

Plain Text BibTeX RIS

APA Style

Adekunle Adebola Olayinka, Adekunle Adewale Oluwadamilare, Ayo Femi Emmanuel. (2021). Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. American Journal of Electrical and Computer Engineering, 5(2), 40-44. https://doi.org/10.11648/j.ajece.20210502.11

Copy | Download

ACS Style

Adekunle Adebola Olayinka; Adekunle Adewale Oluwadamilare; Ayo Femi Emmanuel. Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. Am. J. Electr. Comput. Eng. 2021, 5(2), 40-44. doi: 10.11648/j.ajece.20210502.11

Copy | Download

AMA Style

Adekunle Adebola Olayinka, Adekunle Adewale Oluwadamilare, Ayo Femi Emmanuel. Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. Am J Electr Comput Eng. 2021;5(2):40-44. doi: 10.11648/j.ajece.20210502.11

Copy | Download

@article{10.11648/j.ajece.20210502.11,
  author = {Adekunle Adebola Olayinka and Adekunle Adewale Oluwadamilare and Ayo Femi Emmanuel},
  title = {Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor},
  journal = {American Journal of Electrical and Computer Engineering},
  volume = {5},
  number = {2},
  pages = {40-44},
  doi = {10.11648/j.ajece.20210502.11},
  url = {https://doi.org/10.11648/j.ajece.20210502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajece.20210502.11},
  abstract = {This research work is designed as the distance measurement with energy conservation system using Ultrasonic sensor and Arduino NANO. Ultrasonic sensor emits high frequency sound waves, which reflects from target surfaces. This work utilized these sound waves through Ultrasonic sensor HC-SR04 to determine the change in distance and to apply it to detect the presence of an obstacle (person in this case), which in turns triggers a light bulb ON. Sonar waves are projected back to the receiving end of the sensor after which electrical pulses emitted from the sensor are sent into the Arduino NANO board, electrical signals are then sent to the LEDs and lighting system (bulbs). This work shows the importance of distance measurement to an automatic, hands-free environment control, efficient use of energy sources, and conservation of energy. The experimental results have shown minimal errors (< 3cm) for distances between 10cm and 100cm as the research deployment is most suitable within these distances. The results also describe the corresponding responses of the control system to the different physical conditions likely to be present. The above processes focus on electrical energy conservation as the light bulb comes ON when a person approaches the sensing system and goes OFF when the person leaves.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor
AU  - Adekunle Adebola Olayinka
AU  - Adekunle Adewale Oluwadamilare
AU  - Ayo Femi Emmanuel
Y1  - 2021/07/13
PY  - 2021
N1  - https://doi.org/10.11648/j.ajece.20210502.11
DO  - 10.11648/j.ajece.20210502.11
T2  - American Journal of Electrical and Computer Engineering
JF  - American Journal of Electrical and Computer Engineering
JO  - American Journal of Electrical and Computer Engineering
SP  - 40
EP  - 44
PB  - Science Publishing Group
SN  - 2640-0502
UR  - https://doi.org/10.11648/j.ajece.20210502.11
AB  - This research work is designed as the distance measurement with energy conservation system using Ultrasonic sensor and Arduino NANO. Ultrasonic sensor emits high frequency sound waves, which reflects from target surfaces. This work utilized these sound waves through Ultrasonic sensor HC-SR04 to determine the change in distance and to apply it to detect the presence of an obstacle (person in this case), which in turns triggers a light bulb ON. Sonar waves are projected back to the receiving end of the sensor after which electrical pulses emitted from the sensor are sent into the Arduino NANO board, electrical signals are then sent to the LEDs and lighting system (bulbs). This work shows the importance of distance measurement to an automatic, hands-free environment control, efficient use of energy sources, and conservation of energy. The experimental results have shown minimal errors (< 3cm) for distances between 10cm and 100cm as the research deployment is most suitable within these distances. The results also describe the corresponding responses of the control system to the different physical conditions likely to be present. The above processes focus on electrical energy conservation as the light bulb comes ON when a person approaches the sensing system and goes OFF when the person leaves.
VL  - 5
IS  - 2
ER  -

Copy | Download

Author Information

Adekunle Adebola Olayinka

Computer Science Department, School of Science, Adeyemi College of Education, Ondo, Nigeria
Adekunle Adewale Oluwadamilare

Electronic and Electrical Engineering Department, Faculty of Technology, Obafemi Awolowo University, Ile, Ife, Nigeria
Ayo Femi Emmanuel

Physical and Computer Science Department, College of Natural and Applied Science, McPherson University Seriki Sotayo, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Adekunle Adebola Olayinka, Adekunle Adewale Oluwadamilare, Ayo Femi Emmanuel. (2021). Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. American Journal of Electrical and Computer Engineering, 5(2), 40-44. https://doi.org/10.11648/j.ajece.20210502.11

Copy | Download

ACS Style

Adekunle Adebola Olayinka; Adekunle Adewale Oluwadamilare; Ayo Femi Emmanuel. Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. Am. J. Electr. Comput. Eng. 2021, 5(2), 40-44. doi: 10.11648/j.ajece.20210502.11

Copy | Download

AMA Style

Adekunle Adebola Olayinka, Adekunle Adewale Oluwadamilare, Ayo Femi Emmanuel. Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor. Am J Electr Comput Eng. 2021;5(2):40-44. doi: 10.11648/j.ajece.20210502.11

Copy | Download

@article{10.11648/j.ajece.20210502.11,
  author = {Adekunle Adebola Olayinka and Adekunle Adewale Oluwadamilare and Ayo Femi Emmanuel},
  title = {Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor},
  journal = {American Journal of Electrical and Computer Engineering},
  volume = {5},
  number = {2},
  pages = {40-44},
  doi = {10.11648/j.ajece.20210502.11},
  url = {https://doi.org/10.11648/j.ajece.20210502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajece.20210502.11},
  abstract = {This research work is designed as the distance measurement with energy conservation system using Ultrasonic sensor and Arduino NANO. Ultrasonic sensor emits high frequency sound waves, which reflects from target surfaces. This work utilized these sound waves through Ultrasonic sensor HC-SR04 to determine the change in distance and to apply it to detect the presence of an obstacle (person in this case), which in turns triggers a light bulb ON. Sonar waves are projected back to the receiving end of the sensor after which electrical pulses emitted from the sensor are sent into the Arduino NANO board, electrical signals are then sent to the LEDs and lighting system (bulbs). This work shows the importance of distance measurement to an automatic, hands-free environment control, efficient use of energy sources, and conservation of energy. The experimental results have shown minimal errors (< 3cm) for distances between 10cm and 100cm as the research deployment is most suitable within these distances. The results also describe the corresponding responses of the control system to the different physical conditions likely to be present. The above processes focus on electrical energy conservation as the light bulb comes ON when a person approaches the sensing system and goes OFF when the person leaves.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Distance Measurement and Energy Conservation Using Arduino Nano and Ultrasonic Sensor
AU  - Adekunle Adebola Olayinka
AU  - Adekunle Adewale Oluwadamilare
AU  - Ayo Femi Emmanuel
Y1  - 2021/07/13
PY  - 2021
N1  - https://doi.org/10.11648/j.ajece.20210502.11
DO  - 10.11648/j.ajece.20210502.11
T2  - American Journal of Electrical and Computer Engineering
JF  - American Journal of Electrical and Computer Engineering
JO  - American Journal of Electrical and Computer Engineering
SP  - 40
EP  - 44
PB  - Science Publishing Group
SN  - 2640-0502
UR  - https://doi.org/10.11648/j.ajece.20210502.11
AB  - This research work is designed as the distance measurement with energy conservation system using Ultrasonic sensor and Arduino NANO. Ultrasonic sensor emits high frequency sound waves, which reflects from target surfaces. This work utilized these sound waves through Ultrasonic sensor HC-SR04 to determine the change in distance and to apply it to detect the presence of an obstacle (person in this case), which in turns triggers a light bulb ON. Sonar waves are projected back to the receiving end of the sensor after which electrical pulses emitted from the sensor are sent into the Arduino NANO board, electrical signals are then sent to the LEDs and lighting system (bulbs). This work shows the importance of distance measurement to an automatic, hands-free environment control, efficient use of energy sources, and conservation of energy. The experimental results have shown minimal errors (< 3cm) for distances between 10cm and 100cm as the research deployment is most suitable within these distances. The results also describe the corresponding responses of the control system to the different physical conditions likely to be present. The above processes focus on electrical energy conservation as the light bulb comes ON when a person approaches the sensing system and goes OFF when the person leaves.
VL  - 5
IS  - 2
ER  -

Copy | Download